Enhancing DeNOx performance of CoMnAl mixed metal oxides in low-temperature NH3-SCR by optimizing layered double hydroxides (LDHs) precursor template
Source abstract
Abstract
Abstract LDHs templates (marked as CoAl-MnO2-LDH and CoMnAl-CO3-LDH) were fabricated via ion-exchange/redox reaction and hexamethylenetetramine (HMT) hydrolysis methods respectively. CoMnAl mixed metal oxides (marked as MnO2/CoAl-LDO and CoMnAl-LDO) from the as-prepared LDHs templates were novelly prepared and tested as low-temperature NH3-SCR catalysts. Catalytic evaluation pronouncedly affirmed that the catalytic performances of the as-acquired catalysts were vulnerable to the preparation method of precursor template, where MnO2/CoAl-LDO presented preferable DeNOx activity (over 90% NOx conversion), N2 selectivity and SO2 resistance in much broader working temperature window (90–300 °C) than CoMnAl-LDO. Multiple characterizations revealed that the excellent catalytic performance of the MnO2/CoAl-LDO could be attributed to its higher specific surface area which could promote dispersion of abundant Mn4+ and Co3+ species, and resultantly afforded stronger redox ability and more acid sites. Moreover, dynamic calculation confirmed that the relatively lower activation energy on MnO2/CoAl-LDO for low-temperature NH3-SCR reaction should be closely related to the occurrence of a more rapid redox cycle and in agreement with the excellent DeNOx performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Catalytic Processes in Materials Science · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Rational design of template-free MnOx-CeO2 hollow nanotube as de-NOx catalyst at low temperature10.1016/j.apsusc.2017.09.131 ↗
2. A review on selective catalytic reduction of NOx by NH3 over Mn-based catalysts at low temperatures: catalysts, mechanisms, kinetics and DFT calculations
3. Manganese oxides supported on multi-walled carbon nanotubes for selective catalytic reduction of NO with NH3: catalytic activity and characterization10.1016/j.cej.2012.04.012 ↗
4. Promotional effect of WO3 on O2− over V2O5/TiO2 catalyst for selective catalytic reduction of NO with NH310.1016/j.molcata.2013.03.011 ↗
5. Influence of elevated surface texture hydrated titania on Ce-doped Mn/TiO2 catalysts for the low-temperature SCR of NOx under oxygen-rich conditions10.1016/j.jcat.2015.03.002 ↗
6. Catalytic performance of Al2O3/SiO2/TiO2 loaded with V2O5 for the selective catalytic reduction of NOx with ammonia10.1016/S0920-5861(97)00116-8 ↗
7. Novel manganese oxide confined interweaved titania nanotubes for the low-temperature Selective Catalytic Reduction (SCR) of NOx by NH310.1016/j.jcat.2015.11.013 ↗
8. Cu-Mn mixed oxides for low temperature NO reduction with NH310.1016/j.cattod.2005.10.032 ↗
9. High-temperature water-gas shift over Fe/Ce/Co spinel catalysts: Study of the promotional effect of Ce and Co
10. Novel Co– or Ni–Mn binary oxide catalysts with hydroxyl groups for NH3–SCR of NOx at low temperature10.1016/j.apsusc.2018.02.151 ↗
11. Porous bimetallic Mn2Co1Ox catalysts prepared by a one-step combustion method for the low temperature selective catalytic reduction of NOx with NH310.1016/j.catcom.2015.09.023 ↗
12. Titania supported bimetallic transition metal oxides for low-temperature SCR of NO with NH310.1021/ie060485l ↗
13. Low-temperature selective catalytic reduction (SCR) of NO with NH3 by using Mn, Cr, and Cu oxides supported on hombikat TiO210.1002/1521-3773(20010702)40:13<2479::AID-ANIE2479>3.0.CO;2-7 ↗
14. Facile and template-free fabrication of mesoporous 3D nanosphere-like MnxCo3-xO4 as highly effective catalysts for low temperature SCR of NOx with NH310.1039/C7TA08000J ↗
15. Nitrogen oxide removal over hydrotalcite-derived mixed metal oxides10.1039/C5CY00646E ↗
16. Synthesis, anion exchange, and delamination of Co-Al layered double hydroxide: assembly of the exfoliated nanosheet/polyanion composite films and magneto-optical studies10.1021/ja0584471 ↗
17. Towards understanding, control and application of Layered double hydroxide chemistry10.1039/b604895a ↗
18. Highly dispersed CuyAlOx, mixed oxides as superior low-temperature alkali metal and SO2 resistant NH3-SCR catalysts10.1016/j.apcata.2017.03.021 ↗
19. CuTi LDH derived NH3-SCR catalysts with highly dispersed CuO active phase and improved SO2 resistance10.1016/j.catcom.2017.04.014 ↗
20. The synthesis of CuyMnzAl1-zOx mixed oxide as a low-temperature NH3-SCR catalyst with enhanced catalytic performance10.1039/C7DT02000G ↗
21. Synthesis and thermal decomposition of Mn-Al Layered double hydroxides10.1006/jssc.2002.9637 ↗
22. Facile synthesis of NiAl-LDHs with tunable establishment of acid-base activity sites10.1016/j.matchemphys.2018.02.015 ↗
23. Preparation and capacitance property of MnO2-pillared Ni2+-Fe3+ layered double hydroxides nanocomposite10.1016/j.jcis.2010.01.061 ↗
24. Use and observation of the hydrotalcite “memory effect” for VOC oxidation10.1016/j.cattod.2010.03.012 ↗
25. High temperature adsorption of CO2 on Mg–Al hydrotalcite: effect of the charge compensating anions and the synthesis pH10.1016/j.cattod.2010.10.042 ↗
26. Catalytic removal of toluene in air over Co-Mn-Al nano-oxides synthesized by hydrotalcite route10.1007/s10562-007-9196-4 ↗
27. Synthesis and characterization of Mn intercalated Mg-Al hydrotalcite10.1016/j.jcis.2016.06.057 ↗
28. Facile synthesis of CoAl-LDH/MnO2 hierarchical nanocomposites for high-performance supercapacitors10.1016/j.ceramint.2013.07.127 ↗
29. Synthesis and optical property of one-dimensional spinel ZnMn2O4 nanorods
30. Hydrotalcite derived (Cu, Mn)-Mg-Al metal oxide systems doped with palladium as catalysts for low-temperature methanol incineration10.1016/j.clay.2015.05.027 ↗
31. Cu-Mg-Al hydrotalcite-like materials as precursors of effective catalysts for selective oxidation of ammonia to dinitrogen-the influence of Mg/Al ratio and calcination temperature10.1016/j.clay.2016.05.019 ↗
32. Excellent low temperature performance for total benzene oxidation over mesoporous CoMnAl composited oxides from hydrotalcites10.1039/C6TA02593E ↗
33. Promoted VOC oxidation over homogeneous porous CoXNiAlO composite oxides derived from hydrotalcites: effect of preparation method and doping10.1039/C6RA08394C ↗
34. Catalytic activity of Co-Mg-Al, Cu-Mg-Al and Cu-Co-Mg-Al mixed oxides derived from hydrotalcites in SCR of NO with ammonia10.1016/S0926-3373(01)00254-5 ↗
35. One-pot synthesis of ordered mesoporous Ni–V–Al catalysts for CO methanation10.1016/j.jcat.2015.04.003 ↗
36. Facile synthesis for ordered mesoporous γ-aluminas with high thermal stability10.1021/ja0764308 ↗
37. Selective catalytic reduction of nitrogen oxides by ammonia over Co3O 4 nanocrystals with different shape10.1016/j.apcatb.2012.09.040 ↗
38. Nanosized Au supported on three-dimensionally ordered mesoporous β-MnO2: highly active catalysts for the low-temperature oxidation of carbon monoxide, benzene, and toluene10.1016/j.micromeso.2013.01.007 ↗
39. Effects of cerium incorporation on the catalytic oxidation of benzene over flame-made perovskite La1-xCexMnO3 catalysts10.1016/j.partic.2014.07.001 ↗
40. Co3O4/Ni(OH)2 composite mesoporous nanosheet networks as a promising electrode for supercapacitor applications10.1039/c2jm15863a ↗
41. Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature10.1016/j.catcom.2008.05.001 ↗
42. Ce-based catalysts for the selective catalytic reduction of NOx in the presence of excess oxygen and simulated diesel engine exhaust conditions10.1021/acs.iecr.7b00045 ↗
43. An XPS and TPR study of the reduction of promoted cobalt-kieselguhr Fischer-Tropsch catalysts10.1016/0021-9517(86)90011-4 ↗
44. Enhancing the performance of Co3O4/CNTs for the catalytic combustion of toluene by tuning the surface structures of CNTs10.1016/j.apcatb.2013.03.040 ↗
45. Cu-Mn and Co-Mn catalysts synthesized from hydrotalcites and their use in the oxidation of VOCs10.1016/j.apcatb.2011.02.019 ↗
46. Catalytic removal of toluene in air over Co–Mn–Al nano-oxides synthesized by hydrotalcite route10.1007/s10562-007-9196-4 ↗
47. Studies on surface structure of MxOy/MoO3/CeO2 system (M= Ni, Cu, Fe) and its influence on SCR of NO by NH310.1016/j.apcatb.2009.12.021 ↗
48. Interfacial polymerization of morphologically modified polyaniline: from hollow microspheres to nanowires10.1002/pi.2353 ↗
49. Mechanistic aspects of deNOx processing over TiO2 supported Co-Mn oxide catalysts: structure-activity relationships and in situ DRIFTs analysis10.1021/acscatal.5b01039 ↗
50. Effect of manganese substitution on the structure and activity of iron titanate catalyst for the selective catalytic reduction of NO with NH310.1016/j.apcatb.2009.09.029 ↗
51. Synergistic effect between copper and cerium on the performance of Cux-Ce0.5-x-Zr0.5 (x = 0.1–0.5) oxides catalysts for selective catalytic reduction of NO with ammonia10.1016/j.apcatb.2017.03.065 ↗
52. Influence of SiO2 on M/TiO2 (M = Cu, Mn, and Ce) formulations for low-temperature selective catalytic reduction of NOx with NH3: surface properties and key components in relation to the activity of NOx reduction10.1021/ie504709j ↗
53. Synergy between FeOX and CuOX in FeCuOX/TiO2-hBN composites for NO reduction with NH3
54. Synthesis of Cu0.5Mg1.5Mn0.5Al0.5Ox mixed oxide from layered double of hydroxide precursor as highly efficient catalyst for low-temperature selective catalytic reduction NOx with NH310.1016/j.jcis.2018.04.099 ↗