Pulsed electrodeposition, mechanical properties and wear mechanism in Ni-W/SiC nanocomposite coatings used for automotive applications
Source abstract
Abstract
Abstract In the present work, the dry sliding wear behaviour of electrodeposited Ni-W/SiC nanocomposite coatings after heat treatment was studied. For that purpose, Ni-14 (at%) W/SiC composite coatings with varying proportion of β-SiC particle content were deposited using pulsed current electrodeposition and subsequently heat-treated at 500 °C in vacuum. The coatings were analysed for its structure, surface topography, particle content in coating and inter-particle spacing. The mechanical properties of coatings were evaluated and correlated with SiC content in the respective coating. Sliding wear tests under dry condition were carried out (at room temperature) against WC-Co disc using pin-on-disc configuration. It has been observed that the mechanical properties of nanocomposite coatings follow the rule of mixtures (ROM). The wear rate of the nanocomposite system has demonstrated a linear relationship with the inter-particle spacing of SiC particles embedded in the Ni-W matrix. Specific wear rate and friction coefficient of nanocomposite coatings were rationalised through a mathematical model based on the inverse rule of mixtures (I-ROM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Electrodeposited Nickel composites for high temperature applications
2. Review of nickel-based electrodeposited tribo-coatings10.1007/s12666-017-1175-x ↗
3. A review of electrodeposited Ni-Co alloy and composite coatings: microstructure, properties and applications10.1016/j.surfcoat.2019.04.079 ↗
4. A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology10.1179/0020296713Z.000000000161 ↗
5. Electrodeposition of composite coatings containing nanoparticles in a metal deposit10.1016/j.surfcoat.2005.11.123 ↗
6. Electrodeposition and mechanical and corrosion resistance properties of Ni – W / SiC nanocomposite coatings10.1016/j.matlet.2006.04.007 ↗
7. Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings10.1016/j.matdes.2016.09.070 ↗
8. Direct and pulse current electrodeposition of Ni–W–TiO2 nanocomposite coatings10.1016/j.ceramint.2012.09.054 ↗
9. Mechanical properties of electrodeposited Ni-W ThinFilms with alternate W-rich and W-poor multilayers10.1016/j.electacta.2014.11.190 ↗
10. Influence of heat treatment on microstructure and mechanical properties of pulse electrodeposited Ni-W alloy coatings10.1016/j.surfcoat.2017.03.074 ↗
11. Sliding wear behavior of electrodeposited Ni-W alloy and hard chrome coatings10.1016/j.wear.2015.10.003 ↗
12. The effects of W content on solid-solution strengthening and the critical Hall-Petch grain size in Ni-W alloy10.1016/j.surfcoat.2018.09.086 ↗
13. Ni-W electrodeposited coatings: characterization, properties and applications10.1016/j.surfcoat.2016.09.052 ↗
14. Corrosion behaviour of compositionally modulated nanocrystalline Ni – W coatings
15. Preparation, mechanical properties and wear resistance of Ni–W/SiC nanocomposite coatings10.1179/174328407X154293 ↗
16. Preparation of Ni-W / SiC nanocomposite coatings by electrochemical deposition10.1016/j.jallcom.2017.01.239 ↗
17. Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating10.1016/j.matchar.2016.04.002 ↗
18. Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel–tungsten composite coatings10.1016/j.apsusc.2015.12.179 ↗
19. Microhardness improvement of Ni-W / SiC composite coatings by high frequency induction heat treatment10.1149/2.0661908jes ↗
20. K. Takada, Method of Nickel-Tungsten-Silicon Carbide composite plating. US Patent No. 4892627, 1990.
21. Tribological behavior of pulsed electrodeposited Ni-W/SiC nanocomposites10.1007/s11665-018-3608-z ↗
22. The influence of pulse plating parameters on structure and properties of Ni–W–TiO2 nanocomposite coatings10.1016/j.surfcoat.2014.10.064 ↗
23. Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites10.1016/j.jelechem.2016.05.003 ↗
24. Electrodeposition and characterization of Ni–W/ZrO2 nanocomposite10.1007/s12034-014-0044-z ↗
25. Ni–W/ZrO2 nanocomposites obtained by ultrasonic DC electrodeposition10.1016/j.matdes.2015.04.049 ↗
26. Electrodeposition of nanocrystalline Ni–W coatings strengthened by ultra fi ne alumina particles10.1016/j.surfcoat.2011.10.021 ↗
27. Preparation and wear resistance of pulse electrodeposited Ni–W/Al2O3 composite coatings10.1016/j.apsusc.2011.01.089 ↗
28. Electrodeposition of multilayer Ni–W and Ni–W-alumina nanocomposite coatings10.1080/02670844.2016.1277640 ↗
29. Tribological properties of tertiary Al2O3/CNT/ nanodiamond pulsed electrodeposited Ni–W nanocomposite10.1179/026708309X12526555493314 ↗
30. Preparation of Ni–W–SiO2 nanocomposite coating and evaluation of its hardness and corrosion resistance hardness and corrosion resistance10.1016/j.ceramint.2014.08.034 ↗
31. Synthesis and characterization of Ni-W/TiN nanocomposite coating with enhanced wear and corrosion resistance deposited by pulse electrodeposition10.1016/j.ceramint.2019.04.101 ↗
32. Effect of current density and deposition time on microstructure and corrosion resistance of Ni-W/TiN nanocomposite coating10.1016/j.ceramint.2018.11.184 ↗
33. Ni-W/BN(h) electrodeposited nanocomposite coating with functionally graded microstructure10.1016/j.jallcom.2017.02.037 ↗
34. Tribological and electrochemical corrosion behavior of Ni–W/BN(hexagonal) nano-composite coatings10.1016/j.ceramint.2015.04.089 ↗
35. The influence of pulse plating parameters on microstructure and properties of Ni-W-Si3N4 nanocomposite coatings10.1016/j.ceramint.2016.08.171 ↗
36. Preparation of Ni–W–Si3N4 composite coatings and evaluation of their scratch resistance properties10.1016/j.ceramint.2015.10.153 ↗
37. Microstructural, surface and electrochemical properties of pulse electrodeposited Ni–W/Si3N4 nanocomposite coating10.1016/j.ceramint.2018.07.254 ↗
38. Characterization and frictional behavior of nanostructured Ni–W–MoS2 composite coatings10.1016/j.surfcoat.2009.06.037 ↗
39. Preparation and wear resistance of electrodeposited Ni–W/diamond composite coatings10.1016/j.apsusc.2014.04.175 ↗
40. Pulse current electrodeposition and characterization of Ni-W-MWCNTs nanocomposite coatings10.1149/2.0391507jes ↗
41. A comparative study of effect of mechanical and ultrasound agitation on the properties of pulse electrodeposited Ni-W/MWCNTs composite coatings10.1016/j.jallcom.2018.01.368 ↗
42. Mechanical and tribological properties of Ni-W-TiB2 composite coatings10.1016/j.jallcom.2017.06.044 ↗
43. Tribological and anti-corrosion properties of Ni–W–CeO2 coatings against molten glass10.1016/j.surfcoat.2007.11.031 ↗
44. Pulse current electrodeposition and properties of Ni-W-GO10.1149/2.0171603jes ↗
45. Fabrication of Ni-W-B4C composite coatings and evaluation of its micro-hardness and corrosion resistance properties10.1016/j.ceramint.2018.02.128 ↗
46. Synthesis and Characterization of Ni-W/Cr2O3 nanocomposite coatings using electrochemical deposition technique
47. Electrodeposition mechanism and corrosion behavior of multilayer nanocrystalline nickel-tungsten alloy10.1016/j.electacta.2017.11.139 ↗
48. Mechanical properties and load bearing capability of nanocrystalline nickel- tungsten multilayered coatings10.1016/j.surfcoat.2020.125472 ↗
49. D.V. Schiffelbein, Boeing’s evaluation of a replacement for chromium plating: Ni-W-SiC composite plating, in: Proc. 79th AESF Annu. Tech. Conf., 1992.
50. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
51. Mechanical, thermal and tribological properties of electro- and chemodeposited composite coatings10.1016/0040-6090(82)90235-8 ↗
52. The effect of heat treatment on the structure and abrasive wear resistance of autocatalytic NiP and NiP – SiC coatings10.1016/S0257-8972(01)01492-X ↗
53. Dieter · 1988 · 184
54. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
55. The Hall-Petch breakdown in nanocrystalline metals: a crossover to glass-like deformation10.1016/j.actamat.2007.07.020 ↗
56. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni10.1016/S1359-6454(02)00427-5 ↗
57. Effect of pulse plating parameters on the structure and properties of electrodeposited Ni-Mo films10.1016/j.matchemphys.2016.03.023 ↗
58. Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling10.1016/j.actamat.2010.04.005 ↗
59. Hall-Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel10.1016/S1359-6462(02)00062-3 ↗
60. Formation of amorphous electrodeposited Ni-W alloys and their nanocrystallization10.1016/S0965-9773(98)00078-6 ↗
61. Grain boundary relaxation strengthening of nanocrystalline Ni – W alloys10.1557/jmr.2012.55 ↗
62. Friction in two-body abrasive wear of a WC-Co composite by SiC10.1016/S0043-1648(96)07507-2 ↗
63. A model for the abrasive wear resistance of multiphase materials10.1016/0043-1648(94)90101-5 ↗