Kinetics and mechanism of dye adsorption on WO 3 nanoparticles
Source abstract
Abstract
Monoclinic WO3 nanoparticles were synthesized by a simple acid catalyzed co-precipitation reaction. Spherical particles with average size similar to 55 nm were confirmed from electron microscopy followed by functional, structural and optical characterizations. The adsorption of methylene blue was examined by using WO3 nanoparticles and the capacity was higher than most of the reported studies. The effect of pH and material loading on adsorption was determined. The mechanism of adsorption was examined by XPS and a detailed explanation of surface phenomena was proposed. Regeneration study was carried and a high stability of heat treated WO3 towards adsorption of methylene blue was observed. (C) 2017 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Preparation, characterization and dye adsorption of Au nanoparticles/ZnAl layered double oxides nanocomposites10.1016/j.apsusc.2013.06.136 ↗
2. Excellent adsorption and desorption characteristics of polypyrrole/TiO2 composite for Methylene Blue10.1016/j.apsusc.2013.04.127 ↗
3. Removal of acid dyes from aqueous media by adsorption onto amino-functionalized nanoporous silica SBA-310.1016/j.dyepig.2011.10.016 ↗
4. Neuroenzymatic activity and physiological energetics in Manila clam, Ruditapes philippinarum, during short-term sublethal exposure to harmful alga, Heterocapsa circularisquama10.1016/j.aquatox.2016.04.011 ↗
5. Electrophoresis and stability of nano-colloids: history, theory and experimental examples10.1016/j.cis.2014.06.005 ↗
6. Chemical treatment technologies for waste-water recycling–an overview10.1039/c2ra20340e ↗
7. Multi-walled carbon nanotubes-ionic liquid-carbon paste electrode as a super selectivity sensor: application to potentiometric monitoring of mercury ion (II)10.1016/j.jhazmat.2010.07.039 ↗
8. Selective adsorption of cationic dyes from aqueous solution by polyoxometalate-based metal–organic framework composite10.1016/j.apsusc.2015.11.151 ↗
9. Facile one-pot fabrication of nano-Fe3O4/carboxyl-functionalized baker’s yeast composites and their application in methylene blue dye adsorption10.1016/j.apsusc.2016.09.050 ↗
10. Adsorption of bromo-phenol blue from an aqueous solution onto thermally modified granular charcoal10.1016/j.cherd.2010.04.022 ↗
11. Facile synthesis of aluminium cobalt oxide for dye adsorption10.1016/j.jece.2014.10.007 ↗
12. Metal oxide nano-particles as an adsorbent for removal of heavy metals
13. Mesoporous aerogel titanium oxide–silicon oxide combinations as adsorbents for an azo-dye10.1016/j.micromeso.2014.01.027 ↗
14. Rapid synthesis of ultrahigh adsorption capacity zirconia by a solution combustion technique10.1021/la104674k ↗
15. Co3O4 doped over SBA 15: excellent adsorbent materials for the removal of methyleneblue dye pollutant10.1007/s10098-012-0558-2 ↗
16. Preparation of titanium dioxide/tungsten disulfide composite photocatalysts with enhanced photocatalytic activity under visible light10.1007/s11814-015-0098-7 ↗
17. Photocatalytic degradation with combustion synthesized WO3 and WO3- TiO2 mixed oxides under UV and visible light10.1016/j.seppur.2012.12.010 ↗
18. Hexagonal tungsten trioxide nanorods as a rapid adsorbent for methylene blue10.1016/j.seppur.2011.12.001 ↗
19. Combustion synthesis and characterization of nanocrystalline WO310.1021/ja8012402 ↗
20. Removal of ammonia from air on molybdenum and tungsten oxide modified activated carbons10.1021/es703056t ↗
21. Nano–photocatalytic materials: possibilities and challenges10.1002/adma.201102752 ↗
22. Synthesis and characterization of WO3 spherical nanoparticles and nanorods10.1016/j.materresbull.2013.08.028 ↗
23. Colouration of tungsten oxide films: a model for optically active coatings10.1016/S0927-0248(98)00196-2 ↗
24. Facile hydrogen evolution reaction on WO3 nanorods10.1007/s11671-007-9088-y ↗
25. Enhanced photoelectrochemical activity of sol-gel tungsten trioxide films through textural control10.1021/cm071603d ↗
26. Photoelectrochemical and structural characterization of carbon-doped WO3 films prepared via spray pyrolysis10.1016/j.ijhydene.2009.08.015 ↗
27. Activated carbon surface modifications by adsorption of bacteria and their effect on aqueous lead adsorption10.1002/jctb.506 ↗
28. Effect of alkali on methylene blue (C.I. Basic Blue 9) and other thiazine dyes10.1016/j.dyepig.2010.05.015 ↗
29. Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota10.1016/j.jscs.2011.06.011 ↗
30. Synthesis of WO3 catalytic powders: evaluation of photocatalytic activity under NUV/visible light irradiation and alkaline reaction pH10.1007/s10971-015-3758-5 ↗
31. Congo Red adsorption by ball-milled sugarcane bagasse10.1016/j.cej.2011.10.024 ↗
32. Pseudo-second order model for sorption processes10.1016/S0032-9592(98)00112-5 ↗
33. Steam-activated carbon prepared from Chrysophyllum albidum seed shell for the adsorption of cadmium in wastewater: kinetics, equilibrium and thermodynamic studies10.1504/IJEWM.2013.055595 ↗
34. Adsorption of methylene blue from aqueous solution using steam-activated carbon produced from Lantana camara stem10.4236/jep.2014.513129 ↗
35. Sorption isotherms: a review on physical bases, modeling and measurement10.1016/j.apgeochem.2006.09.010 ↗
36. Statistical mechanical study on the freundlich isotherm equation10.1006/jcis.1998.5843 ↗
37. Insights into the modeling of adsorption isotherm systems10.1016/j.cej.2009.09.013 ↗
38. Morphology-controlled synthesis of highly adsorptive tungsten oxide nanostructures and their application to water treatment10.1039/c0jm01644f ↗
39. Superior dye adsorption capacity of amorphous WO3 sub-micrometer rods fabricated by glancing angle deposition10.1039/C3TA14000H ↗
40. Controlled fabrication of hierarchical WO3 hydrates with excellent adsorption performance10.1039/C3TA13897F ↗
41. Hydrothermal synthesis of WO3 nanorods and their performance in the adsorption of Rhodamine B and the synthesis of adipic acid10.1016/j.ceramint.2014.03.151 ↗
42. Hexagonal single crystal growth of WO3 nanorods along a [110] axis with enhanced adsorption capacity10.1039/c1cc00064k ↗
43. The kinetics of growth of the passive film on tungsten in acidic phosphate solutions10.1016/S0013-4686(98)00026-7 ↗
44. Dissolution kinetics of WO3 in acidic solutions10.1007/s10800-006-9113-3 ↗
45. Comparative adsorption of methylene blue by magnetic baker’s yeast and EDTAD-modified magnetic baker’s yeast: equilibrium and kinetic study
46. Thermal study on electrospun polyvinylpyrrolidone/ammonium metatungstate nanofibers: optimising the annealing conditions for obtaining WO3 nanofibers10.1007/s10973-011-1631-5 ↗
47. Photocatalytic inactivation of E. coli by ZnO–Ag nanoparticles under solar radiation10.1039/C5RA06406F ↗
48. An XPS study of the UV reduction and photochromism of MoO3 and WO310.1063/1.443047 ↗
49. Effect of the tungsten oxidation states in the thermal coloration and bleaching of amorphous WO3 films10.1016/S0040-6090(00)01828-9 ↗
50. Structural and electrochromic properties of tungsten oxide prepared by surfactant-assisted process10.1016/j.solmat.2009.02.016 ↗
51. Role of oxygen vacancies in crystalline WO310.1039/C6TC01643J ↗