Effect of shot peening on the oxidation behavior of thermal barrier coatings
Source abstract
Abstract
Abstract A conventional thermal barrier coating (TBC) system is made up of a multilayered coating system that comprises a metallic bond coat including oxidation-resistant MCrAlY and a thermally insulating ceramic top coat including yttria stabilized zirconia (YSZ). In this study, in order to improve the oxidation behavior in conventionally produced TBC systems, shot peening process is applied for modification of surface layer structure of atmospheric plasma spray (APS) bond coats. The oxidation behavior of TBCs, produced by the APS process and subjected to shot peening, was investigated. Oxidation tests were performed under isothermal conditions at 1000 °C for different time periods. The coatings produced by the APS process include high porosity and oxide content due to atmospheric production conditions as well as exposure to very high temperature. In this study, the coatings, produced by the APS process, subsequently subjected to shot-peening, were compared with the ones which were not shot peened. Following the application of the shot peening process, a dense structure is obtained due to the plastic deformation effect in the metallic bond coating structure at a certain distance from the surface. To this end, the effects of the shot-peening on the high temperature oxidation behavior of the coatings are investigated and evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Effects of heat treatment on adhesion strength of thermal barrier coating systems10.1016/j.engfailanal.2013.02.029 ↗
2. Cold sprayed MCrAlY+X coating for gas turbine blades and vanes10.1016/j.surfcoat.2013.08.019 ↗
3. Study of the microstructure and oxidation behavior of YSZ and YSZ/Al2O3 TBCs with HVOF bond coatings
4. Thermal shock and cycling behavior of thermal barrier coatings (TBCs) used in gas turbines
5. Structure and durability evaluation of YSZ+Al2O3 composite TBCs with APS and HVOF bond coats under thermal cycling conditions10.1016/j.surfcoat.2011.04.081 ↗
6. Pt-modified Ni aluminides, MCrAlY-base multilayer coatings and TBC systems fabricated by Spark Plasma Sintering for the protection of Ni-base superalloys10.1016/j.surfcoat.2009.09.054 ↗
7. Oxidation and hot corrosion of thermal barrier coatings (TBCs)
8. Residual stress evolution of thermally grown oxide in thermal barrier coatings deposited onto nickel-base superalloy and iron-base alloy with thermal exposure ageing10.1016/j.jallcom.2013.08.144 ↗
9. Modelling of TBC system failure: stress distribution as a function of TGO thickness and thermal expansion mismatch10.1016/j.engfailanal.2004.12.027 ↗
10. Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying10.1016/j.surfcoat.2007.12.028 ↗
11. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: a review10.1007/s11666-007-9148-y ↗
12. Effects of microshot peening on surface characteristics of high-speed tool steel
13. Effect of shot peening on the fatigue behaviour of cast magnesium A810.1016/j.msea.2008.11.044 ↗
14. Elasto-plastic pseudo-dynamic numerical model for the design of shot peening process parameters10.1016/j.matdes.2008.11.031 ↗
15. An analytical model of the surface roughness of an aluminum alloy treated with a surface nanocrystallization and hardening process10.1016/j.scriptamat.2004.10.021 ↗
16. Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process10.1016/j.actamat.2004.08.031 ↗
17. Effect of TGO thickness on thermal cyclic lifetime and failure mode of plasma-sprayed TBCs10.1111/jace.12868 ↗
18. Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process10.1016/j.apsusc.2012.03.111 ↗
19. High temperature oxidation behavior of thermal barrier coatings
20. Kinetics and mechanism of isothermal oxidation of compositionally graded yttria stabilized zirconia (YSZ) based thermal barrier coating10.1016/j.corsci.2014.06.050 ↗
21. Microstructural stability of nanostructured YSZ–alumina composite TBC compared to conventional YSZ coatings by means of oxidation and hot corrosion tests10.1016/j.jallcom.2014.02.004 ↗
22. Isothermal oxidation behavior of cryomilled NiCrAlY bond coat: homogeneity and growth rate of TGO10.1016/j.surfcoat.2011.05.025 ↗
23. Effects of initial oxidation on β phase depletion and oxidation of CoNiCrAlY bond coatings fabricated by warm spray and HVOF processes10.1016/j.surfcoat.2013.01.028 ↗
24. Life approximation of thermal barrier coatings via quantitative microstructural analysis10.1016/j.msea.2012.04.008 ↗
25. Davis · 2004 · 41
26. Isothermal oxidation behavior of plasma sprayed MCrAlY coatings
27. Effect of processing parameters on MCrAlY bond coat roughness and lifetime of APS–TBC systems10.1016/j.surfcoat.2014.06.075 ↗
28. Shot peening effect on aluminide diffusion coating formation on alloy steels at low temperatures10.1016/j.scriptamat.2006.08.016 ↗
29. Effect of bond coat surface roughness on the thermal cyclic behavior of thermal barrier coatings10.1016/j.surfcoat.2005.12.027 ↗
30. Formation and behavior of thermal barrier coatings on nickel-based super alloys
31. Effects of surface modification on thermal cycling life time of thermal barrier coatings with HVOF NiCrAlY bond coat10.1016/j.pnsc.2012.04.007 ↗
32. Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation10.1016/S1003-6326(11)61366-6 ↗
33. Effects of shot peening process on thermal cycling lifetime of TBCs prepared by EB-PVD10.1016/S1000-9361(07)60022-3 ↗
34. Effect of chemical compositions and surface morphologies of MCrAlY coating on its isothermal oxidation behavior10.1007/s11666-010-9590-0 ↗
35. Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC's10.1016/j.surfcoat.2006.07.247 ↗
36. Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying10.1016/j.surfcoat.2010.03.043 ↗
37. Pre-oxidation and TGO growth behaviour of an air-plasma-sprayed thermal barrier coating10.1016/j.surfcoat.2008.01.021 ↗
38. TGO growth behaviour in TBCs with APS and HVOF bond coats10.1016/j.surfcoat.2007.09.042 ↗
39. Kubaschewski · 1979 · 378
40. The formation model of Ni–Cr oxides on NiCoCrAlY-sprayed coating10.1016/j.apsusc.2011.02.044 ↗
41. Combined pre-annealing and pre-oxidation treatment for the processing of thermal barrier coatings on NiCoCrAlY bond coatings10.1016/j.surfcoat.2006.07.253 ↗
42. Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions10.1016/j.actamat.2004.12.014 ↗
43. Effect of surface condition during pre-oxidation treatment on isothermal oxidation behavior of MCrAlY bond coat prepared by EB-PVD10.1016/j.surfcoat.2006.09.076 ↗
44. Oxidation resistance of YSZ-alumina composites compared to normal YSZ TBC coatings at 1100°C10.1016/j.jallcom.2011.05.029 ↗