Effect of MoO3/carbon nanotubes on friction and wear performance of glass fabric-reinforced epoxy composites under dry sliding
Source abstract
Abstract
Abstract A hybrid material composed of MoO3 nanobelts and oxide multi-walled carbon nanotubes (MoO3-CNTs) was prepared via a one-step hydrothermal method. A modified vacuum filtration technique was used to prepare uniform MoO3-CNTs films (f-MoO3-CNTs). These MoO3-CNTs and f-MoO3-CNTs were used to enhance the tribological properties of a glass fabric-reinforced epoxy (GF/EP) composite prepared using the vacuum-assisted resin transfer molding (VARTM) method. Wear tests were carried out by using a ball-on-disc (“steel-on-polymer”) configuration under dry sliding conditions. The hybrid material acted as both the lubrication and reinforcement to improve the friction and wear performance of the GF/EP composite. The frictional coefficient decreased from 0.61 for the neat GF/EP composite to 0.50 for MoO3-CNTs/GF/EP and to 0.32 for f-MoO3-CNTs/GF/EP. The wear resistance of the GF/EP composite improved by about four times with the addition of f-MoO3-CNTs. The morphologies of the worn surfaces of the composites and their possible wear micro-mechanisms were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A novel hydroxyl epoxy phosphate monomer enhancing the anticorrosive performance of waterborne graphene/epoxy coatings10.1016/j.apsusc.2017.08.224 ↗
2. Improved of the wear resistance of carbon nanofiber/epoxy nanocomposite by a surface functionalization of the reinforcement10.1016/j.apsusc.2013.10.118 ↗
3. Epoxy-graphene-MoS2 composites with improved tribological behavior under dry sliding contact10.1016/j.triboint.2018.09.016 ↗
4. Role of functionalized multiwalled carbon nanotubes on mechanical properties of epoxy-based composites at cryogenic temperature10.1177/0954008314534279 ↗
5. Hansen solubility parameters of polyglycolic acid and interaction parameters between polyglycolic acid and solvents10.1016/j.eurpolymj.2015.09.009 ↗
6. CNT-polymer nanocomposites under frictional contact conditions10.1016/j.compositesb.2018.08.003 ↗
7. In vitro degradation of polyglycolic acid synthesized by a one-step reaction10.1515/polyeng-2014-0005 ↗
8. MoS2 nanosheets-decorated carbon fiber hybrid for improving the friction and wear properties of polyimide composite10.1016/j.compositesa.2018.02.039 ↗
9. Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications10.1016/j.compositesb.2012.03.014 ↗
10. L-arginine-catalyzed synthesis of nanometric organosilica particles through a waterborne sol−gel process and their porous structure analysis10.1021/acs.langmuir.8b00042 ↗
11. Surface functionalized carbon nanotubes and its effects on the mechanical properties of epoxy based composites at cryogenic temperature10.1007/s00289-014-1202-6 ↗
12. First-principles study of MoO3/graphene composite as cathode material for high-performance lithium-ion batteries10.1016/j.apsusc.2017.10.147 ↗
13. Preparation of SnO2@rGO/CNTs/S composite and application for lithium-sulfur battery cathode material10.1016/j.apsusc.2018.08.038 ↗
14. Formation of uniform colloidal spheres based on lignosulfonate, a renewable biomass resource recovered from pulping spent liquor10.1021/acssuschemeng.7b03756 ↗
15. Diblock polymer brush (PHEAA-b-PFMA): microphase separation behavior and anti-protein adsorption performance10.1021/acs.langmuir.8b02584 ↗
16. Optical band gap, local work function and field emission properties of MBE grown β-MoO3 nanoribbons10.1016/j.apsusc.2019.01.124 ↗
17. Enhanced photo catalytic activity of graphene oxide/MoO3 nanocomposites in the degradation of Victoria Blue Dye under visible light irradiation10.1016/j.apsusc.2017.12.099 ↗
18. Selective catalytic reduction of NOx with NH3 over MoO3/Mn-Zr composite oxide catalyst10.1016/j.apsusc.2018.10.081 ↗
19. Structure and photoluminescence properties of MoO3-x/graphene nanoflake hybrid nanomaterials formed via surface growth10.1016/j.apsusc.2019.02.183 ↗
20. Protein-resistance performance of amphiphilic copolymer brushes consisting of fluorinated polymers and polyacrylamide grafted from silicon surfaces10.1039/C4RA16036C ↗
21. Effect of MoO3 on mechanical interfacial behavior and anti-oxidation of carbon fibers-reinforced composites10.1016/j.jiec.2015.04.025 ↗
22. Epoxy-graphene-MoS2 composites with improved tribological behavior under dry sliding contact10.1016/j.triboint.2018.09.016 ↗
23. Binder free MoO3/multiwalled carbon nanotube thin film electrode for high energy density supercapacitors10.1016/j.electacta.2013.08.114 ↗
24. Coating of alpha-MoO3 on nitrogen-doped carbon nanotubes by electrodeposition as a high-performance cathode material for lithium-ion batteries10.1016/j.jpowsour.2014.10.136 ↗
25. Controllable synthesis of MoO3-deposited TiO2 nanotubes with enhanced lithium-ion intercalation performance10.1016/j.jpowsour.2013.07.096 ↗
26. An interwoven MoO3@CNT scaffold interlayer for high-performance lithium-sulfur batteries10.1039/C8TA01726C ↗
27. Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: magnetic field assisted alignment and cryogenic temperature mechanical properties10.1016/j.jcis.2018.01.087 ↗
28. Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers10.1039/C6NR02216B ↗
29. Facile synthesize α-MoO3 nanobelts with high adsorption property10.1016/j.matlet.2015.05.095 ↗
30. Large-Scale Production of MoO3-reduced graphene oxide powders with superior lithium storage properties by spray-drying process10.1016/j.electacta.2015.05.090 ↗
31. Facile Synthesis of graphene@NiO/MoO3 composite nanosheet arrays for high-performance supercapacitors10.1016/j.electacta.2014.11.088 ↗
32. Selective hydrogen sulfide (H2S) sensors based on molybdenum trioxide (MoO3) nanoparticle decorated reduced graphene oxide10.1016/j.mssp.2015.03.034 ↗
33. Organic vapor sensing behaviors of conductive thermoplastic polyurethane-graphene nanocomposites10.1039/C6TC00987E ↗
34. Rapid preparation of large size, few-layered MoO3 by anisotropic etching10.1016/j.matlet.2018.07.039 ↗
35. Electrochromic properties of MoO3-WO3 thin films prepared by a sol-gel method, in the presence of a triblock copolymer template10.1016/j.surfcoat.2017.08.012 ↗
36. Friction and wear of high electrical conductive carbon nanotube buckypaper/epoxy composites10.1016/j.compscitech.2015.03.012 ↗
37. Friction-induced nano-structural evolution of graphene as a lubrication additive10.1016/j.apsusc.2017.10.119 ↗
38. Role of humidity in reducing the friction of graphene layers on textured surfaces10.1016/j.apsusc.2017.01.226 ↗
39. Effect of carbon nanotube and silicon carbide on microstructure and dry sliding wear behavior of copper hybrid nanocomposites10.1016/S1003-6326(16)64449-7 ↗
40. Changes in the composition, structure and friction property of sputtered MoS2 films by LEO environment exposure10.1016/j.apsusc.2014.12.175 ↗
41. Friction behavior of network-structured CNT coating on pure titanium plate10.1016/j.apsusc.2015.09.063 ↗
42. Investigation of wear behavior of as-plated and plasma-nitrided Ni-B-CNT electroless having different CNTs concentration10.1016/j.apsusc.2018.07.020 ↗
43. Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants10.1016/j.triboint.2018.10.025 ↗
44. Fabrication of GNS/MoS2 composite with different morphology and its tribological performance as a lubricant additive10.1016/j.apsusc.2018.10.266 ↗
45. Laser-induced improvement in tribological performances of surface coatings with MoS2 nanosheets and graphene10.1016/j.surfcoat.2018.11.063 ↗
46. Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites10.1016/j.tafmec.2018.05.007 ↗
47. Experiment study on tribological performances of GNPs/MoS2 coating10.1016/j.triboint.2017.10.018 ↗
48. Preparation and tribological properties of MoS2/graphene oxide composites10.1016/j.apsusc.2017.05.022 ↗
49. Microstructure, mechanical properties and wear behaviour of Al-20Si-3Fe alloy prepared by spray conform10.1088/2053-1591/ab1d15 ↗
50. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗