journal article·2011-05

Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric

Yanzhen Zhang, Yonghong Liu, Renjie Ji, Baoping Cai

Applied Surface Science· Volume 257· Issue 14
Publisher page

Abstract

Electrical discharge machining (EDM) caused a recast layer to form at the machined surface of the workpiece. The characteristics of the recast layer have a great relationship with the type of dielectric. The research work in this paper aims to acquire a profound knowledge of the recast layers of a surface machined by sinking EDM using water-in-oil (W/O) emulsion as dielectric. Scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrograph (EDS) and micro hardness analysis were performed. The characteristics of the recast layer formed in W/O emulsion were investigated by comparing them with those of the recast layer formed in kerosene and de-ionized water dielectric. It was found that the recast layer formed in W/O emulsion exhibited larger surface roughness, thickness and micro hardness compared with that formed in kerosene and de-ionized water. Both carbide and oxide were detected in the recast layer formed in W/O emulsion whereas only carbide was detected in the recast layer formed in kerosene. Due to the higher supersaturation of gases in the melted material, the recast layer formed in W/O emulsion was found to possess more micro-voids than that formed in kerosene and de-ionized water.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Ekmekci · Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. · 2009 · 40 · 7010.1007/s11663-008-9220-0 ↗
2. Liao · J. Mater. Process. Technol. · 2004 · 149 · 16510.1016/j.jmatprotec.2003.10.034 ↗
3. Kunieda · CIRP Ann. Manuf. Technol. · 2005 · 54 · 59910.1016/S0007-8506(07)60020-1 ↗
4. Kumar · J. Mater. Process. Technol. · 2009 · 209 · 367510.1016/j.jmatprotec.2008.09.032 ↗
5. Pantelis · Surf. Eng. · 1998 · 14 · 5510.1179/sur.1998.14.1.55 ↗
6. Moro · J. Mater. Process. Technol. · 2004 · 149 · 6510.1016/j.jmatprotec.2003.10.058 ↗
7. Zhao · Mater. Sci. Forum · 2004 · 471–472 · 75010.4028/www.scientific.net/MSF.471-472.750 ↗
8. Patowari · Int. J. Manuf. Technol. Manage. · 2010 · 21 · 8310.1504/IJMTM.2010.034288 ↗
9. Wang · J. Mater. Process. Technol. · 2002 · 129 · 13910.1016/S0924-0136(02)00597-6 ↗
10. Simao · Int. J. Mach. Tools Manuf. · 2003 · 43 · 12110.1016/S0890-6955(02)00187-6 ↗
11. Patowari · Int. J. Adv. Manuf. Technol. · 2010 · 1
12. Chen · J. Mater. Process. Technol. · 2009 · 209 · 434310.1016/j.jmatprotec.2008.11.013 ↗
13. Yan · Mater. Trans. · 2001 · 42 · 259710.2320/matertrans.42.2597 ↗
14. Furutania · Precis. Eng. · 2001 · 25 · 13810.1016/S0141-6359(00)00068-4 ↗
15. Masuzawa · CIRP Ann. Manuf. Technol. · 1983 · 32 · 11910.1016/S0007-8506(07)63374-5 ↗
16. Konig · CIRP Ann. Manuf. Technol. · 1987 · 36 · 10510.1016/S0007-8506(07)62564-5 ↗
17. Guu · Mater. Sci. Eng. A · 2003 · 358 · 3710.1016/S0921-5093(03)00272-7 ↗
18. Chen · J. Mater. Process. Technol. · 1999 · 87 · 10710.1016/S0924-0136(98)00340-9 ↗
19. Yan · J. Mach. Tools Manuf. · 2005 · 45 · 19410.1016/j.ijmachtools.2004.07.006 ↗
20. Ekmekci · Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. · 2005 · 36 · 11710.1007/s11663-005-0011-6 ↗
21. Lee · J. Mater. Process. Technol. · 2003 · 142 · 67610.1016/S0924-0136(03)00688-5 ↗
22. Cusanelli · J. Mater. Process. Technol. · 2004 · 149 · 28910.1016/j.jmatprotec.2003.11.047 ↗
23. Cabanillas · Mater. Sci. Eng. A · 2000 · 276 · 13310.1016/S0921-5093(99)00443-8 ↗
24. Kruth · CIRP Ann. Manuf. Technol. · 1995 · 44 · 16910.1016/S0007-8506(07)62299-9 ↗
25. Kunieda · CIRP Ann. Manuf. Technol. · 1991 · 40 · 21510.1016/S0007-8506(07)61971-4 ↗
26. Kunieda · CIRP Ann. Manuf. Technol. · 1997 · 46 · 14310.1016/S0007-8506(07)60794-X ↗
27. Kunieda · CIRP Ann. Manuf. Technol. · 2003 · 52 · 14710.1016/S0007-8506(07)60552-6 ↗
28. Machining characteristics of EDM using water as dielectric fluid
29. Soni · J. Mater. Process. Technol. · 1996 · 56 · 43910.1016/0924-0136(95)01858-1 ↗
30. Zinelis · Dent. Mater. · 2007 · 23 · 60710.1016/j.dental.2006.03.021 ↗
31. Guu · Mater. Sci. Eng. A · 2007 · 466 · 6110.1016/j.msea.2007.02.035 ↗
32. Ekmekci · J. Mach. Tools Manuf. · 2006 · 46 · 85810.1016/j.ijmachtools.2005.07.020 ↗
33. Ekmekci · Appl. Surf. Sci. · 2007 · 253 · 923410.1016/j.apsusc.2007.05.078 ↗
34. Tabrett · J. Mater. Sci. Lett. · 1996 · 15 · 179210.1007/BF00275344 ↗
35. Lee · Mater. Sci. Eng. A · 2004 · 364 · 34610.1016/j.msea.2003.08.046 ↗
36. Levy · CIRP Ann. Manuf. Technol. · 1993 · 42 · 22710.1016/S0007-8506(07)62431-7 ↗
37. Leão · J. Mater. Process. Technol. · 2004 · 149 · 34110.1016/j.jmatprotec.2003.10.043 ↗