Uncertainty Propagation of Spectral Matching Ratios Measured Using a Calibrated Spectroradiometer
Source abstract
Abstract
The international standard IEC62670-3 (International Electrotechnical Committee) “Photovoltaic Concentrators (CPV) Performance Testing—Part 3—Performance Measurements and Power Rating” sets the guidelines for power measurements of a CPV device, both in indoor and outdoor conditions. When measuring in outdoor conditions, the acquired data have to be filtered a posteriori, in order to select only those points measured with ambient conditions close to the Concentrator Standard Operating Conditions (CSOC). The most stringent requirement to be met is related to the three Spectral Matching Ratios (SMR), which have all to be within the limit of 1.00 ± 0.03. SMR are usually determined by the ratio of the currents of component cells to monitor the outdoor spectral ratio conditions during the CPV device power measurements. Experience demonstrates that obtaining real world data meeting these strict conditions is very difficult in practice. However, increasing the acceptable range would make the entire filtering process less appropriate from a physical point of view. Given the importance of correctly measuring the SMR, an estimation of their associated measurement uncertainties is needed to allow a proper assessment of the validity of the 3% limit. In this study a Monte Carlo simulation has been used, to allow the estimation of the propagation of uncertainties in expressions having the and integral form. The method consists of applying both random and wavelength correlated errors to the measured spectra and to the measured spectral responses of the three CPV cell junctions, according to the measurement uncertainties of the European Solar Test Installation (ESTI). The experimental data used in this study have been acquired during clear sky conditions in May 2016, at ESTI’s facilities in Ispra, northern Italy (45°49′ N 8°37′ E).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Directorate C—Energy, Transport and Climate, European Commission Joint Research Centre, I-21027 Ispra, Italy
References (11)
Show source-provided references
1. Philipps, S., Horowitz, K., and Kurtz, S. (2016). Current Technology Status of Concentrator Photovoltaic (CPV), Fraunhofer Institute for Solar Energy Systems ISE.10.2172/1351597 ↗
2. Solar cell efficiency tables (version 49)10.1002/pip.2855 ↗
3. What does CPV need to achieve in order to succeed?
4. International Electrotechnical Committee (IEC) (2017). International Standard IEC62670-3, IEC International Electrotechnical Committee. [1st ed.].
5. Pavanello, D., Galleano, R., Kenny, R., and Müllejans, H.T. (2017, January 25–29). Uncertainty Propagation of Spectral Matching Ratios Measured Using a Calibrated Spectroradiometer. Proceedings of the 13th European photovoltaic solar energy conference proceedings, Amsterdam, The Netherlands.
6. International Electrotechnical Committee (IEC) (2013). International Standard IEC 62670-1, IEC. [1st ed.].
7. International Electrotechnical Committee (IEC) (2013). International Standard IEC60904-3, IEC. [3th ed.].
8. Alfio, Q., Riccardo, S., and Fausto, S. (2000). Matematica Numerica, Springer Science & Business Media.
9. International Electrotechnical Committee (IEC) (2014). International Standard IEC60904-8, IEC. [3th ed.].
10. Tailoring the performances of low operating voltage InAlAs/InGaAs avalanche photodetectors10.1364/OE.23.019278 ↗
11. Woolliams, E.R. (2013). Determining the Uncertainty Associated with Integrals of Spectral Quantities, European Association of National Metrology Institutes.