Fictitious Reference Iterative Tuning-Based Two-Degrees-of-Freedom Method for Permanent Magnet Synchronous Motor Speed Control Using FPGA for a High-Frequency SiC MOSFET InverterMOSFET Inverter
Source abstract
Abstract
This paper proposes proportional-integral/proportional gain controller parameter tuning in a two-degrees-of-freedom (2DOF) control system using the fictitious reference iterative tuning (FRIT) method for permanent magnet synchronous motor (PMSM) speed control using a field-programmable gate array (FPGA) for a high-frequency SiC MOSFET (metal oxide semiconductor field-effect transistor) inverter. The PI-P (proportional-integral/proportional) controller parameters can be tuned using the FRIT method from one-shot experimental data without using a mathematical model of the plant. Particle swarm optimization is used for FRIT optimization. An inverter that uses a SiC MOSFET is presented to achieve high-frequency operation at up to100 kHz using a switching pulse-width modulation (PWM) technique. As a result, a high-responsivity and high-stability PMSM (permanent magnet synchronous motor) control system is achieved, where the speed response follows the ideal response characteristic for both the step response and the disturbance response. High-responsivity and optimal disturbance rejection can be achieved using the 2DOF control system. FPGA-based digital hardware control is used to maximize the switching frequency of the SiC MOSFET inverter. Finally, an experimental system is set up, and experimental results are presented to prove the viability of the proposed method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Multilevel Inverters and Converters · Sensorless Control of Electric Motors · Induction Heating and Inverter Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu 808-0196, Japan
References (27)
Show source-provided references
1. Lai, R., Wang, L., Sabate, J., Elasser, A., and Stevanovic, L. (2012, January 4–6). High-voltage high- frequency inverter using 3.3 kV SiC MOSFETs. Proceedings of the 15th International Power Electronics and Motion Control Conference, Novi Sad, Serbia.10.1109/EPEPEMC.2012.6397275 ↗
2. Johnson, C.M. (2004, January 20–25). Comparison of silicon and silicon carbide semiconductors for a 10 kV switching application. Proceedings of the 35th Annual IEEE Power Electronics Specialists Conference, Aachen, Germany.
3. Shen, M., and Krishhamurthy, S. (2012, January 5–9). Simplified loss analysis for high speed SiC MOSFET inverter. Proceedings of the 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition, Orlando, FL, USA.10.1109/APEC.2012.6166047 ↗
4. Shen, M., Krishhamurthy, S., and Muldhokar, M. (2011, January 17–22). Design and performance of a high frequency silicon carbide inverter. Proceedings of the IEEE Energy Conversion Congress and Exposition, Phoenix, AZ, USA.10.1109/ECCE.2011.6064038 ↗
5. Shirabe, A.K., Swamy, M., Kang, J.K., Hisatsune, M., Wu, Y., Kebort, D., and Honea, J. (2012, January 15–20). Advantages of high frequency PWM in AC motor drive applications. Proceedings of the IEEE Energy Conversion Congress and Exposition, Releigh, NC, USA.10.1109/ECCE.2012.6342519 ↗
6. Two-degree-of-freedom PID controllers, tutorial paper
7. Harahap, C.R., Saito, R., Yamada, H., and Hanamoto, T. (2014). Speed control of permanent magnet synchronous motor using FPGA for high frequency SiC MOSFET inverter. J. Eng. Sci. Technol., 11–20.
8. A new approach to parameter tuning of controllers by using one-shot experimental data—A Proposal of Fictititous Reference Iterative Tuning
9. Soma, S., Kaneko, O., and Fujii, T. (September, January 30). A new method of a controller parameter tuning based on input-output data – Fictitious Reference Iterative Tuning. Proceedings of the 2nd IFAC workshop on Adaptation and Learning in Control and Signal Processing (ALCOSP), Yokohama, Japan.
10. Wakasa, Y., Tanaka, K., and Nishimura, Y. (2012, January 28–30). Online controller tuning via FRIT and recursive least-squares. Proceedings of the IFAC Conference on Advances in PID Control, Brescia, Italy.10.3182/20120328-3-IT-3014.00013 ↗
11. Azuma, T., and Watanabe, S. (2014, January 2–4). A design of PID controllers using FRIT-PSO. Proceedings of the 8th International Conference of Sensing Technology, Liverpool, UK.
12. Kaneko, O., Soma, S., and Fuji, T. (2005, January 4–8). A Fictitious Reference Iterative Tuning (FRIT) in the two degree of freedom control scheme and its application to closed loop system identification. Proceedings of the 16th Triennial World Congress, Prague, Czech Republic.
13. Kaneko, O., Yamashina, Y., and Yamamoto, S. (2010, January 8–10). Fictitious reference tuning for the optimal parameter of a feedforward controller in the two degree of freedom control system. Proceedings of the IEEE International Conference on Control Applications, Yokohama, Japan.10.1109/CCA.2010.5611243 ↗
14. Fictitious reference tuning of the feed-forward controller in a two-degree-of-freedom control system10.9746/jcmsi.4.55 ↗
15. Fictitious reference iterative tuning in the two-degree-of-freedom control scheme and its application to a facile closed loop system identification10.9746/sicetr1965.42.17 ↗
16. Harahap, C.R., and Hanamoto, T. (2015, January 15–18). FRIT based PI tuning for speed control of PMSM using FPGA for high frequency SiC MOSFET Inverter. Proceedings of the 4th International Conference on Informatics, Electronics, & Vision, Kitakyushu, Japan.10.1109/ICIEV.2015.7333974 ↗
17. Masuda, S. (2011, January 28–30). A direct PID gains tuning method for DC Motor control using an input-output data generated by disturbance response. Proceedings of the IEEE International Conference on Control Applications (CCA), Denver, CO, USA.10.1109/CCA.2011.6044352 ↗
18. Iterative Feedback Tuning-an overview10.1002/acs.714 ↗
19. Direct Nonlinear Control Design: The Virtual Reference Feedback Tuning (VRFT) Approach10.1109/TAC.2005.861689 ↗
20. Virtual reference feedback tuning for two-degree-of-freedom controllers10.1002/acs.711 ↗
21. Rojas, J.D., and Vilanova, R. (2009, January 23–26). Feedforward based two degree of freedom formulation of the virtual reference feedback tuning approach. Proceedings of the European Control Conference, Budapest, Hungary.10.23919/ECC.2009.7074664 ↗
22. Direct controller design and iterative tuning applied to the coupled drives apparatus
23. Design of a two-degree-of-freedom controller for motor drives10.1109/9.151110 ↗
24. Hanamoto, T., Deriha, M., Ikeda, H., and Tsuji, T. (2008, January 6–9). Digital hardware circuit using FPGA for speed control system of permanent magnet synchronous motor. Proceedings of 18th International Conference on Electrical Machines, Vilamoura, Portugal.10.1109/ICELMACH.2008.4799962 ↗
25. Campbell, S.L., Chancelier, J.-P., and Nikoukhah, R. (2006). Modeling and Simulation in Scilab./Scicos, Springer Science + Business Media.
26. Rao, S.S. (2009). Engineering Optimization, Theory and Practice, John Wiley & Sons, Inc., Wiley Eastern Limited, publishers and New Age International Publishers, Ltd.. [3rd ed.].
27. Pedroni, V.A. (2004). Circuit Design with VHDL, MIT Press.