Research on the Design of Multi-Rope Friction Hoisting System of Vertical Shaft Gravity Energy Storage System
Source abstract
Abstract
Renewable energy generation methods such as wind power and photovoltaic power have problems of randomness, intermittency, and volatility. Gravity energy storage technology can realize the stable and controllable conversion of gravity potential energy and electric energy by lifting and lowering heavy loads. The hoisting system is an important component of a gravity energy storage system, and its lifting capacity and speed seriously restrict its energy storage capacity, energy conversion efficiency, and operational safety and reliability. In this paper, a design method for a multi-rope friction hoisting system of a vertical shaft gravity energy storage system is proposed. The parameter design and calculation of the hoisting rope, balance rope, and friction wheel of the friction hoisting system under typical conditions were carried out. The static and dynamic anti-slip capabilities of the friction hoisting system under the typical condition were explored. The results show that the maximum acceleration and deceleration speed of the compacted strand wire rope scheme is the largest, and the lifting and lowering time is the shortest. The maximum acceleration and deceleration speed of the triangular strand wire rope scheme is the lowest, and the lifting and lowering time is the longest. The dynamic tension of the hoisting rope at the heavy-load end is positively correlated with the acceleration, and the maximum value occurs in the accelerated lifting stage and decelerated lowering stage of the heavy load. The static anti-slip safety factor between the hoisting rope and the friction lining and the specific pressure between the hoisting rope and the friction lining comply with the requirements of China’s Safety Regulations for Coal Mines. The dynamic anti-slip safety factor of the hoisting system under different rope selection schemes is greater than the minimum value of 1.25 stipulated in the Safety Regulations for Metal and Nonmetal Mines. The research results are of great significance for the safety, reliability, and stable and efficient energy storage of a gravity energy storage system.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration and Dynamic Analysis · Microgrid Control and Optimization · Belt Conveyor Systems Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
North China Power Engineering Co., Ltd. of China Power Engineering Consulting Group, Beijing 100120, China
School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China
School of Mechanical and Electrical Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China
Funding
North China Power Engineering Co., Ltd. of China Power Engineering Consulting Group · Top-Notch Academic Programs Project of Jiangsu Higher Education Institutions (TAPP) · Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
References (27)
Show source-provided references
1. Impact of reduced renewable energy costs on carbon peak and carbon neutrality of power industry
2. Multi-objective optimization for China’s power carbon emission reduction by 203510.1007/s11630-019-1108-6 ↗
3. Estimating the economics of electrical energy storage based on different policies in China10.1007/s11630-020-1274-6 ↗
4. Analysis on optimal dispatching of integrated energy system with additional carbon tax
5. A Critical Review of the Integration of Renewable Energy Sources with Various Technologies
6. Coordinated planning for flexible interconnection and energy storage system in low-voltage distribution networks to improve the accommodation capacity of photovoltaic10.1016/j.gloei.2023.11.004 ↗
7. Solid gravity energy storage: A review10.1016/j.est.2022.105226 ↗
8. Triebel, C., Reincke-Collon, C., Berninger, U., and Tröndle, T. (2021). Method and Apparatus for Operating an Electrical Energy Storage System. (11,025,063), U.S. Patent.
9. Zhang, Z., Wu, A., and Zhang, H. (2019). Gravity Energy Storage System Depending on Coal Mine. (209,676,010U), Chinese Patent.
10. Song, L., Dong, B., Wang, D., Wang, S., Zhu, L., and Wu, Y. (2019). Gravity Energy Storage System of Hoisting and Transporting System Based on Mine Vertical Shaft. (109,665,430A), Chinese Patent.
11. Pedretti, A., and Gross, W. (2020). Energy Storage System and Method. (20,200,028,379), U.S. Patent.
12. Gravity powers batteries for renewable energy10.1126/science.372.6541.446 ↗
13. Chaves, E. (2021). Modular Gravitational Energy Storage Systems. (20,210,336,478), U.S. Patent.
14. Qiu, Q., Xiao, L., Zhang, J., Wang, S., Xia, X., Tang, W., Zhang, D., Guo, W., and Xu, X. (2021). Gravity Energy Storage System Based on Vertical Shaft and Roadway. (113,460,841A), Chinese Patent.
15. Qiu, Q., Xiao, L., Nie, Z., Zhang, J., Teng, Y., Wang, S., Zhao, Y., and Zhou, W. (2022). Gravity Energy Storage System Based on Efficient Lifting and Transferring of Multiple Heavy Objects. (114,151,296A), Chinese Patent.
16. Qiu, Q., Zhao, Y., Xiao, L., Nie, Z., Zhang, J., Teng, Y., Wang, S., Luo, X., and Zhou, W. (2022). Automatic Connection and Parking System for Multi-Weight Gravity Energy Storage. (114,899,951A), Chinese Patent.
17. Underground energy storage project engineering
18. Emergency Management Department (2016). China’s Safety Regulations for Coal Mines.
19. (2005). Safety Inspections-Testing Specifications of In-Service Friction Hoist System for Coal Mines (Standard No. AQ 1014-2005).
20. (2023). Multi-Rope Friction Hoist (Standard No. GB/T 10599-2023).
21. (2006). Steel Wire Ropes for Important Purposes (Standard No. GB/T 8918-2006).
22. Li, Y., and Co, Z. (2013). Basic Theory of Mine Hoisting System, Coal Industry Press.
23. (2020). Compacted Strand Ropes (Standard No. YB/T 5359-2020).
24. Selection and damage analysis of balance rope of multi rope friction elevator in coal mine vertical shaft
25. (2023). Steel Wire Ropes for Balance (Standard No. GB/T 20119-2023).
26. (2020). Safety Regulation for Metal and Nonmetal Mines (Standard No. GB 16423-2020).
27. Study on measuring method of equivalent mass of mine elevating system