journal article·2021-04-09Open access

Estimation of Mode I Fracture of U-Notched Polycarbonate Specimens Using the Equivalent Material Concept and Strain Energy Density

Jafar Albinmousa, Jihad AlSadah, Muhammad A. Hawwa, Hussain M. Al-Qahtani

Applied Sciences· Volume 11· Issue 8

Abstract

Polycarbonate (PC) has a wide range of applications in the electronic, transportation, and biomedical industries. In addition, investigation on the applicability to use PC in superstrate photovoltaic modules is ongoing research. In this paper, PC is envisioned to be used as a material for structural components in renewable energy systems. Usually, structural components have geometrical irregularities, i.e., notches, and are subjected to severe mechanical loading. Therefore, the structural integrity of these components shall consider fracture analysis on notched specimens. In this paper, rectangular PC specimens were machined with straight U-notches having different radii and depths. Eight different notch radii with a depth of 6.0 mm were tested. In addition, three notch depths with a radius of 3.5 mm were considered. Quasi-static fracture tests were performed under displacement-controlled loading with a speed of 5 mm/min. Digital image correlation technique was used to capture the strain fields for un-notched and notched specimens. It was assumed that fracture occurs at the onset of necking. The equivalent material concept (EMC) along with the strain energy density criterion (SED) were employed to estimate the fracture load. The EMC-SED combination is shown to be an effective and practical tool for estimating the fracture load of U-notched PC specimens.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia

Physics Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia

Funding

King Abdulaziz City for Science and Technology

References (43)

Show source-provided references
1. Crack Path Support for Deformation Mechanisms in Fatigue of Polycarbonate10.1016/j.engfracmech.2013.02.003 ↗
2. Fatigue Crack Growth and Craze-Induced Crack Tip Shielding in Polycarbonate10.1016/j.polymer.2012.01.032 ↗
3. Optimization of Injection Molding Process Parameters to Improve the Mechanical Performance of Polymer Product against Impact10.1007/s00170-014-6434-y ↗
4. Experimental and Numerical Determination of Mixed Mode Crack Extension Angle10.1520/JTE101668 ↗
5. A Model for Calculating Geometry Factors for a Mixed-Mode I–II Single Edge Notched Tension Specimen10.1016/j.engfracmech.2011.09.005 ↗
6. Xu, Y., Gao, T., Wang, J., and Zhang, W. (2016). Experimentation and Modeling of the Tension Behavior of Polycarbonate at High Strain Rates. Polymers, 8.10.3390/polym8030063 ↗
7. Kuhn, H. (2000). Mechanical Testing and Evaluation. ASM Handbook, ASM International. [11th ed.].10.31399/asm.hb.v08.9781627081764 ↗
8. Mechanics of Polycarbonate during High-Rate Tension10.2140/jomms.2007.2.1853 ↗
9. Dynamic Mixed-Mode Fracture Behaviors of PMMA and Polycarbonate10.1016/j.engfracmech.2017.02.029 ↗
10. Tension Testing of Polycarbonate at High Strain Rates10.1016/j.polymertesting.2009.06.002 ↗
11. Tensile Behavior of Polycarbonate over a Wide Range of Strain Rates10.1016/j.msea.2010.03.088 ↗
12. Dwivedi, A., Bradley, J., and Casem, D. (2012). Mechanical Response of Polycarbonate with Strength Model Fits, Dynamic Science Inc.
13. Constitutive Modeling of Polycarbonate during High Strain Rate Deformation10.1002/pen.23315 ↗
14. The Rate Dependent Tensile Response of Polycarbonate and Poly-Methylmethacrylate10.1007/s40870-015-0020-8 ↗
15. Modeling of the Strain Rate Dependency of Polycarbonate’s Yield Stress: Evaluation of Four Constitutive Equations
16. Constitutive Modeling of Polycarbonate over a Wide Range of Strain Rates and Temperatures10.1007/s11043-016-9320-1 ↗
17. New Aspects in the Mechanical Behavior of a Polycarbonate Found by an Experimental Study10.1155/2018/1540919 ↗
18. Zhang, W., and Xu, Y. (2019). Mechanical Properties of Polycarbonate: Experiment and Modeling for Aeronautical and Aerospace Applications, Elsevier.
19. Notch-Sensitive Fracture of Polycarbonate10.1016/j.ijsolstr.2003.09.058 ↗
20. Thermo-Visco-Hyperelastic Behavior of Polycarbonate in Forming of a Complex Geometry10.1016/j.jmapro.2020.06.019 ↗
21. Malwad, D., and Tungikar, V. (2020). Development and Performance Testing of Reflector Materials for Concentrated Solar Power: A Review. Mater. Today Proc.10.1016/j.matpr.2020.10.744 ↗
22. Fabrication of Robust Solar Mirrors on Polymeric Substrates by Physical Vapor Deposition Technique10.1016/j.solmat.2020.110476 ↗
23. A Finite-Volume-Energy Based Approach to Predict the Static and Fatigue Behavior of Components with Sharp V-Shaped Notches10.1023/A:1013595930617 ↗
24. On the Use of the Theory of Critical Distances to Predict Static Failures in Ductile Metallic Materials Containing Different Geometrical Features10.1016/j.engfracmech.2008.04.018 ↗
25. Chebat, F., Peron, M., Viespoli, L.M., Welo, T., and Berto, F. (2018). Fatigue Strength Assessment of Steel Rollers: On the Reliability of the Strain Energy Density Approach on Real Components. Appl. Sci., 8.10.3390/app8071015 ↗
26. Strain Energy Gradient-Based LCF Life Prediction of Turbine Discs Using Critical Distance Concept10.1016/j.ijfatigue.2018.04.006 ↗
27. Cicero, S., Fuentes, J.D., and Torabi, A.R. (2020). Using the Equivalent Material Concept and the Average Strain Energy Density to Analyse the Fracture Behaviour of Structural Materials. Appl. Sci., 10.10.3390/app10051601 ↗
28. Fatigue of V-Notched ZK60 Magnesium Samples: X-Ray Damage Evolution Characterization and Failure Prediction10.1016/j.ijfatigue.2020.105734 ↗
29. Albinmousa, J. (2021). Fatigue Failure Prediction of U-Notched ZK60 Magnesium Samples Using the Strain Energy Density Approach. Metals, 11.10.3390/met11010113 ↗
30. Estimation of Tensile Load-Bearing Capacity of Ductile Metallic Materials Weakened by a V-Notch: The Equivalent Material Concept10.1016/j.msea.2012.01.007 ↗
31. Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples under Large-Scale Yielding Conditions10.1007/s10704-013-9804-9 ↗
32. On the Ability of the Equivalent Material Concept in Predicting Ductile Failure of U-Notches under Moderate- and Large-Scale Yielding Conditions10.1134/S1029959915040062 ↗
33. Cracking in PMMA Containing U-Shaped Notches10.1046/j.1460-2695.2000.00264.x ↗
34. Tensile Fracture Analysis of a Ductile Polymeric Material Weakened by U-Notches10.1016/j.polymertesting.2017.09.041 ↗
35. Strain Hardening Equation and the Prediction of Tensile Strength of Rolled Polymers10.1002/pen.760130405 ↗
36. On the Crack Extension in Plates Under Plane Loading and Transverse Shear10.1115/1.3656897 ↗
37. Fracture Study in Notched Ductile Polymeric Plates Subjected to Mixed Mode I/II Loading: Application of Equivalent Material Concept10.1016/j.euromechsol.2018.01.009 ↗
38. Fracture and Load-Carrying Capacity of 3D-Printed Cracked Components10.1016/j.eml.2020.100692 ↗
39. D20 Committee (2014). Test Method for Tensile Properties of Plastics, ASTM International.
40. Failure Criteria for Brittle Elastic Materials10.1023/B:FRAC.0000022244.31825.3b ↗
41. Recent Developments in Brittle and Quasi-Brittle Failure Assessment of Engineering Materials by Means of Local Approaches10.1016/j.mser.2013.11.001 ↗
42. Averaged Strain Energy Density Criterion to Predict Ductile Failure of U-Notched Al 6061-T6 Plates under Mixed Mode Loading10.1016/j.tafmec.2017.04.010 ↗
43. Rapid Calculations of Notch Stress Intensity Factors Based on Averaged Strain Energy Density from Coarse Meshes: Theoretical Bases and Applications10.1016/j.ijfatigue.2010.02.017 ↗