Pushing Mechatronic Applications to the Limits via Smart Motion Control
Source abstract
Abstract
Modern machines strive to run at limit performance and dependability while their operational area and size are getting restricted. To achieve those objectives, often swift integration of custom-made subsystems is required, either actuators, sensors, electronic, or SW modules. Such a diverse suite of elements needs specific approaches and tools for fast optimization and adjustment following model-based system engineering (MBSE) and digital twinning principles. The large-scale I-MECH project was an industry-driven initiative striving to give a scientific response to those demands. The intermediate results were summarized in the authors’ previous work. The purpose of this paper is to report on final project results, namely specific performance achievements and figures based on measurable KPIs. After a brief description of key technologies, special focus is given to industrial printing technology based on a generic substrate carrier. However, it is shown that similar and consistent methodology can be applicable in many other industrial domains, such as semiconductors, healthcare robotics, machining, packaging, etc. Thus, the main merit of this survey is a holistic approach to motion control design.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Flexible and Reconfigurable Manufacturing Systems · Iterative Learning Control Systems · Control Systems in Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NTIS Research Center, University of West Bohemia, 301 00 Pilsen, Czech Republic
Sioux CCM, NL-5633 Nuenen, The Netherlands
Institute of Electronics and Computer Science, LV-1006 Riga, Latvia
References (65)
Show source-provided references
1. Sabanovic, A., and Ohnishi, K. (2011). Motion Control Systems, John Wiley and Sons.10.1002/9780470825754 ↗
2. Kwon, S., and Chung, W.K. (2004). Perturbation Compensator Based Robust Tracking Control and State Estimation of Mechanical Systems, Springer Science and Business Media.10.1007/BFb0121383 ↗
3. Van Dooren, P., and Wyman, B. (2012). Linear Algebra for Control Theory, Springer Science and Business Media.
4. Milovanovic, D., Rao, K., and Bojkovic, Z. (2008). Wireless Multimedia Communications, CRC Press.
5. Gene, F., and Franklin, J. (2018). David Powell, Abbas Emami-Naeini: Feedback Control of Dynamic Systems, Pearson. [8th ed.].
6. Akeela, R., and Elziq, Y. (2017, January 13–17). Design and Verification of IEEE 802. 11ah for IoT and M2M Applications. Proceedings of the 2017 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), Kona, HI, USA.10.1109/PERCOMW.2017.7917612 ↗
7. Cech, M., Beltman, A.-J., and Ozols, K. (2019, January 10–13). I-MECH—Smart System Integration for Mechatronic Applications. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869465 ↗
8. Composable and predictable dynamic loading for time-critical partitioned systems on multiprocessor architectures10.1016/j.micpro.2015.05.017 ↗
9. Yin, K., and Zhong, C. (2011, January 15–17). Data collection in wireless sensor networks. Proceedings of the 2011 IEEE International Conference on Cloud Computing and Intelligence Systems, 2011 and Automation, Beijing, China.10.1109/CCIS.2011.6045040 ↗
10. A Wide-Range Velocity Measurement Method for Motion Control10.1109/TIE.2008.2003208 ↗
11. Command shaping for flexible systems: A review of the first 50 years10.1007/s12541-009-0084-2 ↗
12. De Luca, A., Schroder, D., and Thummel, M. (2007, January 10–14). An Acceleration-based State Observer for Robot Manipulators with Elastic Joints. Proceedings of the 2007 IEEE International Conference on Robotics and Automation, Rome, Italy.10.1109/ROBOT.2007.364064 ↗
13. Zirn, O., and Jaeger, C. (2010, January 4–7). Vibration damping for machine tool servo drives by load acceleration feedback. Proceedings of the 2010 IEEE International Symposium on Industrial Electronics, Bari, Italy.10.1109/ISIE.2010.5637702 ↗
14. Survey of iterative learning control: A learning-based method for high-performance tracking control10.1109/MCS.2006.1636313 ↗
15. Robust iterative learning control for vibration suppression of industrial robot manipulators10.1115/1.4037265 ↗
16. Dual arm manipulation—A survey10.1016/j.robot.2012.07.005 ↗
17. Goubej, M., and Schlegel, M. (2014, January 24–29). Robust PID Control of Electrical Drive with Compliant Load. Proceedings of the IFAC World Congress, Cape Town, SA, USA.10.3182/20140824-6-ZA-1003.01006 ↗
18. Valencia, J., Goswami, D., and Goossens, K. (2015, January 26–28). Composable Platform-Aware Embedded Control Systems on a Multi-core Architecture. Proceedings of the 2015 Euromicro Conference on Digital System Design, Funchal, Madeira, Portugal.10.1109/DSD.2015.74 ↗
19. Giacomelli, M., Colombo, D., Finzi, G., Setka, V., Simoni, L., and Visioli, A. (2019, January 10–13). An autotuning procedure for motion control of oscillatory mechatronic systems. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869039 ↗
20. Reitinger, J., Čech, M., and Königsmarková, J. (2018, January 28–31). Model-based control system design for steam turbine based on Functional Mock-up interface (FMI/FMU). Proceedings of the 2018 19th International Carpathian Control Conference (ICCC), Miskolc, Hungary.10.1109/CarpathianCC.2018.8399693 ↗
21. On the Inclusion of Temperature in the Friction Model of Industrial Robots10.1016/j.ifacol.2017.08.933 ↗
22. Modelling the temperature in joint friction of industrial manipulators10.1017/S0263574717000509 ↗
23. Čech, M., Königsmarková, J., Reitinger, J., and Balda, P. (2017, January 6–9). Novel tools for model-based control system design based on FMI/FMU standard with application in energetics. Proceedings of the 2017 21st International Conference on Process Control (PC), Strbske Pleso, Slovakia.10.1109/PC.2017.7976250 ↗
24. Dosedel, M., and Havranek, Z. (2018, January 5–7). Design and performance evaluation of smart vibration sensor for industrial applications with built-in MEMS accelerometers, 2018. Proceedings of the 18th International Conference on Mechatronics-Mechatronika (ME), Brno, Czech Republic.
25. Walsh, M., O’Flynn, B., and Torres, J. (2019, January 24–26). Vibration Characterisation for Fault Detection and Isolation in Linear Synchronous Motor based Conveyor Systems. Proceedings of the 2019 International Conference on Automation, Computational and Technology Management (ICACTM), London, UK.10.1109/ICACTM.2019.8776825 ↗
26. Walsh, M., Abbruzzo, G., Hickey, S., Ramirez-Garcia, S., O’Flynn, B., and Torres, J. (2019, January 10–13). On the potential for Electromagnetic Energy Harvesting for a Linear Synchronous Motor based Transport System in Factory Automation. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8868949 ↗
27. PI Control, PI-Based State Space Control, and Model-Based Predictive Control for Drive Systems with Elastically Coupled Loads—A Comparative Study10.1109/TIE.2010.2089950 ↗
28. Sensorless Torsion Control of Elastic-Joint Robots with Hysteresis and Friction10.1109/TIE.2015.2453415 ↗
29. Garcia, J., Gonzalez, D., Rodriguez, A., Santamaria, B., Estremera, J., and Armendia, M. (2019, January 10–13). Application of Impedance Control in Robotic Manipulators for Spacecraft On-orbit Servicing. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869069 ↗
30. Acceleration Feedback in PID Controlled Elastic Drive Systems10.1016/j.ifacol.2018.06.068 ↗
31. Catenazzo, D., O’Flynn, B., and Walsh, M. (2018, January 3–6). On the use of Wireless Sensor Networks in Preventative Maintenance for Industry 4.0. Proceedings of the 2018 12th International Conference on Sensing Technology (ICST), Limerick, Ireland.10.1109/ICSensT.2018.8603669 ↗
32. Developing a hierarchical decomposition methodology to increase manufacturing process and equipment health awareness10.1016/j.jmsy.2018.03.002 ↗
33. Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques10.1109/MIE.2013.2287651 ↗
34. Kavitha, V., and Thangadurai, R. (2014). Advance Detection of Faults in Drives Using MEMS. Int. J. Adv. Res. Electr. Electron. Instrum. Eng., 3.
35. (2019, April 12). I-MECH, Smart Mechatronic Solutions. Available online: https://www.i-mech.eu/.
36. Model-based system engineering in control education using HIL simulators10.1016/j.ifacol.2020.12.1812 ↗
37. Essential challenges in motion control education10.1016/j.ifacol.2019.08.196 ↗
38. Reviews of wearable healthcare systems: Materials, devices and system integration10.1016/j.mser.2019.100523 ↗
39. A Route toward Smart System Integration: From Fiber Design to Device Construction10.1002/adma.201902301 ↗
40. Raspberry Pi-based HIL simulators for control education10.1016/j.ifacol.2019.08.126 ↗
41. Scordino, C., Savino, I.M., Cuomo, L., Miccio, L., Tagliavini, A., Bertogna, M., and Solieri, M. (2020, January 10–13). Real-Time Virtualization for Industrial Automation. Proceedings of the 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA46521.2020.9211890 ↗
42. Königsmarková, J., and Schlegel, M. (2017, January 6–9). Identification of n-link inverted pendulum on a cart. Proceedings of the 2017 21st International Conference on Process Control (PC), Strbske Pleso, Slovakia.10.1109/PC.2017.7976186 ↗
43. Šetka, V., Ježek, O., and Novickis, R. (2019, January 10–13). Modular Signal Processing Unit for Motion Control Applications Based on System-on-Chip with FPGA. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869121 ↗
44. Survey of Low-Power Wireless Network Technologies for the Internet of Things10.3103/S0146411621020024 ↗
45. Klima, B., Buchta, L., Doseděl, M., Havranek, Z., and Blaha, P. (2019, January 10–13). Prognosis and Health Management in electric drives applications implemented in existing systems with limited data rate. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869520 ↗
46. Bode-like control loop performance index evaluated for a class of fractional-order processes10.3182/20140824-6-ZA-1003.01217 ↗
47. Goubej, M., and Helma, V. (2019, January 10–13). Vibration damping in gantry crane systems: Finite horizon optimal control approach. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869111 ↗
48. Simplified input-output inversion control of a double pendulum overhead crane for residual oscillations reduction10.1016/j.mechatronics.2018.10.002 ↗
49. Beyond Performance/Cost Tradeoffs in Motion Control: A Multirate Feedforward Design with Application to a Dual-Stage Wafer System10.1109/TCST.2018.2882341 ↗
50. LFT-Structured Uncertainty State-Space Modeling for State Feedback Robust Control of the Ultra-Precision Wafer Stage10.1109/TIE.2019.2903779 ↗
51. Goubej, M., Meeusen, S., Mooren, N., and Oomen, T. (2019, January 10–13). Iterative learning control in high-performance motion systems: From theory to implementation. Proceedings of the 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8868996 ↗
52. Mooren, N., Witvoet, G., and Oomen, T. (2019, January 10–12). Feedforward Motion Control: From Batch-to-Batch Learning to Online Parameter Estimation. Proceedings of the 2019 American Control Conference (ACC), Philadelphia, PA, USA.10.23919/ACC.2019.8814481 ↗
53. Comparing Platform-aware Control Design Flows for Composable and Predictable TDM-based Execution Platforms10.1145/3315572 ↗
54. Zhu, S., Goswami, D., and Li, H. (2019, January 28). Evaluation Platform of Platoon Control Algorithms in Complex Communication Scenarios. Proceedings of the 2019 IEEE 89th Vehicular Technology Conference (VTC2019-Spring), Kuala Lumpur, Malaysia.10.1109/VTCSpring.2019.8746477 ↗
55. Haghi, M., Wenguang, F., Goswami, D., and Goossens, K. (2019, January 10–12). Delay-based Design of Feedforward Tracking Control for Predictable Embedded Platforms. Proceedings of the 2019 American Control Conference (ACC), Philadelphia, PA, USA.10.23919/ACC.2019.8814430 ↗
56. Analytical Characterization of End-to-End Communication Delays with Logical Execution Time10.1109/TCAD.2018.2857398 ↗
57. Beyond decentralized wafer/reticle stage control design: A double-Youla approach for enhancing synchronized motion10.1016/j.conengprac.2018.10.011 ↗
58. LPV control for a wafer stage: Beyond the theoretical solution10.1016/j.conengprac.2004.03.008 ↗
59. Monitoring system design of high-speed carton packaging machine based on PCC and servo control
60. Grundelius, M. (2000, January 12–15). Iterative optimal control of liquid slosh in an industrial packaging machine. Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), Sydney, Australia.
61. Tracking and contour error control in CNC servo systems10.1016/j.ijmachtools.2004.08.008 ↗
62. Development of a 3-axis desktop milling machine and a CNC system using advanced modern control algorithms10.1007/s12541-010-0005-4 ↗
63. Development and implementation of a control system for a retrofitted CNC machine by using Arduino10.5937/fmet1704565Q ↗
64. Task-space region-reaching control for medical robot manipulator10.1016/j.compeleceng.2017.02.004 ↗
65. Mechanical chest compression with a medical parallel manipulator for cardiopulmonary resuscitation10.1002/rcs.1628 ↗