Fibrous poly(chitosan-g-dl-lactic acid) scaffolds prepared via electro-wet-spinning
Source abstract
Abstract
DL-lactic acid was grafted onto chitosan to produce poly(chitosan-g-DL-lactic acid)(PCLA) copolymers. These PCLAs were then spun into submicron and/or nanofibers to fabricate scaffolds using an electro-wet-spinning technique. The diameter of fibers in different scaffolds could vary from about 100 nm to around 3 microm. The scaffolds exhibited various pore sizes ranging from about 1 microm to less than 30 microm and different porosities up to 80%. Two main processing parameters, that is, the concentration of PCLA solutions and the composition proportions of coagulation solutions, were optimized for obtaining desired scaffolds with well-controlled structures. The tensile properties of the scaffolds in both dry and hydrated states were examined. Significantly improved tensile strength and modulus for these fibrous scaffolds in their hydrated state were observed. The data collected from in vitro rabbit-fibroblast/scaffold culture showed that there were no substantial differences in the viability, density and distribution of cultured fibroblasts between PCLA scaffolds and pure chitosan scaffolds.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Cheremisinoff · 1996
2. Electrospun aliphatic polycarbonates as tailored tissue scaffolds materials10.1016/j.biomaterials.2007.01.024 ↗
3. Exploring and engineering the cell surface interface10.1126/science.1106587 ↗
4. Epithelial contact guidance on well-defined micro- and nanostructured substrates10.1242/jcs.00383 ↗
5. Nanofiber alignment and direction of mechanical strain affect the ECM production of human ACL fibroblast10.1016/j.biomaterials.2004.04.037 ↗
6. Electrospun nanofibrous structure: a novel scaffold for tissue engineering10.1002/jbm.10167 ↗
7. Electrospinning and the formation of nanofibers
8. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
9. Transport properties of porous membranes based on electrospun nanofibers10.1016/S0927-7757(01)00616-1 ↗
10. Electrospun fine-textured scaffolds for heart tissue constructs10.1016/j.biomaterials.2005.01.052 ↗
11. Controlled fabrication of a biological vascular substitute10.1016/j.biomaterials.2005.07.048 ↗
12. Recent advances in polymer nanofibers
13. Peptide–amphiphile nanofibers: a versatile scaffold for the preparation of self-assembling materials10.1073/pnas.072699999 ↗
14. Template synthesis of carbon nanotubule and nanofiber arrays10.1016/S0965-9773(97)00036-6 ↗
15. Synthetic nano-scale fibrous extracellular matrix10.1002/(SICI)1097-4636(199907)46:1<60::AID-JBM7>3.0.CO;2-H ↗
16. Nanometre diameter fibres of polymer, produced by electrospinning10.1088/0957-4484/7/3/009 ↗
17. Electrospun chitosan-based nanofibers and their cellular compatibility10.1016/j.biomaterials.2005.03.027 ↗
18. A review of chitin and chitosan applications10.1016/S1381-5148(00)00038-9 ↗
19. Implantable applications of chitin and chitosan10.1016/S0142-9612(03)00026-7 ↗
20. Studies on nerve affinity of chitosan-derived materials10.1002/1097-4636(200011)52:2<285::AID-JBM7>3.0.CO;2-G ↗
21. Brine · 1992
22. Chitin and chitosan nanofibers: electrospinning of chitin and deacetylation of chitin nanofibers10.1016/j.polymer.2004.08.048 ↗
23. Electrospinning of chitosan solution in acetic acid with poly(ethylene oxide)10.1163/156856204774196171 ↗
24. Chitosan biocomponent nanofibers and nanoporous fibers10.1016/j.carres.2005.11.028 ↗
25. Electrospinning of chitosan10.1002/marc.200400253 ↗
26. Electrospinning of chitosan dissolved in concentrated acetic acid solution10.1016/j.biomaterials.2005.01.066 ↗
27. Preparation of chitosan microfibres using electro-wet-spinning and their electroactuation properties10.1088/0964-1726/15/2/044 ↗
28. Porous chitosan scaffolds for tissue engineering10.1016/S0142-9612(99)00011-3 ↗
29. Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review10.1016/S0142-9612(00)00126-5 ↗
30. Mechanical and barrier properties of biodegradable films made from chitosan and poly(lactic acid) blends10.1023/B:JOOE.0000003121.12800.4e ↗
31. Preparation and characterization of biodegradable poly(l-lactide)/chitosan blends10.1016/j.eurpolymj.2004.12.002 ↗
32. Biodegradable polylactide/chitosan blend membranes10.1021/bm0600825 ↗
33. Porous polylactide/chitosan scaffolds for tissue engineering10.1002/jbm.a.31025 ↗
34. Glass transition temperature of chitosan and miscibility of chitosan/poly(N-vinyl pyrrolidone) blends10.1016/S0032-3861(00)00067-7 ↗
35. Muzzarelli · 1986
36. The degree of deacetylation of chitosan: advocating the first derivative UV-spectrophotometry method of determination10.1016/S0039-9140(97)00288-9 ↗
37. Ionic conductivity of chitosan membranes10.1016/S0032-3861(02)00881-9 ↗
38. Synthesis and characterization of pH-sensitive hydrogels based on chitosan and dl-lactic acid10.1002/(SICI)1097-4628(19991220)74:13<3193::AID-APP23>3.0.CO;2-V ↗
39. Stability improvement of electrospun chitosan nanofibrous membranes in neutral or weak basic aqueous solutions10.1021/bm060286l ↗
40. A study on cytocompatible poly(chitosan-g-l-lactic acid)10.1016/S0032-3861(03)00676-1 ↗
41. Novel preparative method for porous hydrogels using overrun process10.1002/pi.1719 ↗
42. Tissue engineering in cardiovascular surgery: MTT, a rapid and reliable quantitative method to assess the optimal human cell seeding on polymeric meshes10.1016/S1010-7940(99)00068-8 ↗
43. Electrospinning of nanofibers: Reinventing the wheel?10.1002/adma.200400719 ↗
44. Synthesis and characterization of a novel amphiphilic chitosan–polylactide graft copolymer10.1016/j.carbpol.2004.09.006 ↗
45. Synthesis and characterization of a brush-like copolymer of polylactide grafted onto chitosan10.1016/j.carres.2003.09.013 ↗
46. Crystallinity and mechanical properties of optically pure polylactides and their blends10.1002/pen.20331 ↗
47. In vitro evaluation of novel bioactive composites based on Bioglass? filled polylactide foams for bone tissue engineering scaffolds10.1002/jbm.a.20055 ↗
48. Bending instability of electrically charged liquid jets of polymer solutions in electrospinning10.1063/1.373532 ↗
49. Bending instability in electrospinning of nanofibers10.1063/1.1333035 ↗
50. Structure and process relationship of electrospun bioabsorbable nanofiber membranes10.1016/S0032-3861(02)00275-6 ↗
51. Mechanisms of polymer degradation and erosion10.1016/0142-9612(96)85755-3 ↗
52. Electrospun polymer nanofibres with small diameters10.1088/0957-4484/17/6/004 ↗
53. Mechanical properties of porous polylactide/chitosan blend membranes10.1002/mame.200600481 ↗
54. Polymers
55. Influence of water on the dielectric behaviour of chitosan films10.1007/s003960050099 ↗