Voltage-induced architectural control and interfacial phonon modulation in Cu–Fe functionalized TiO$$_2$$ nanotubes
Source abstract
Abstract
Abstract This study explores the link between voltage-controlled architectural engineering and the resulting lattice dynamics in Cu–Fe functionalized TiO $$_2$$ nanotubes. By systematically tuning the anodization potential (30-40 V) and time (40-60 min), we successfully tailored the nanotubular morphology and interfacial structure, as verified by XRD, Raman spectroscopy, and SEM analyses. This work is to elucidate how these structural modifications influence govern the fundamental thermodynamic behavior of the system. Through temperature-dependent heat capacity ( $$C_p$$ ) measurements in the 2-300 K range, we reveal a complex vibrational beyond conventional. In the low-temperature regime, deviations from ideal Debye behavior by a Schottky-type contribution indicate a defect rich interfacial environment, where oxygen vacancies and structural disorder introduce discrete energy-level splittings. As temperature increases (50-210 K), a hybrid Debye-Einstein model suggests structural stiffening in the functionalized nanotubes. This effect is reflected in the upward shift of the characteristic phonon temperatures ( $$\theta _D$$ and $$\theta _E$$ ), indicating increased lattice rigidity and modified sound velocity within the nanotubular framework. Thermodynamic integration up to 298.15 K further demonstrates that the system’s free-energy balance is predominantly governed by vibrational entropy rather than internal energy accumulation. These results suggest that the performance of functionalized semiconductors arises not solely from composition, but from nanoscale architectural features that influence phonon-related behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Copper-based nanomaterials and applications · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. M. Liao, H. Ma, D. Yu, H. Han, X. Xu, X. Zhu, Formation mechanism of anodic titanium oxide in mixed electrolytes. Mater. Res. Bull. 95, 539–545 (2017). https://doi.org/10.1016/j.materresbull.2017.08.04110.1016/j.materresbull.2017.08.041 ↗
2. O. Zakir, R. Idouhli, M. Elyaagoubi, M. Khadiri, A. Aityoub, Y. Koumya, S. Rafqa, A. Abouelfida, A. Outzourhit, Fabrication of TiO$$_2$$ nanotube by electrochemical anodization: Toward photocatalytic application. J. Nanomater. 2020, 4745726 (2020). https://doi.org/10.1155/2020/474572610.1155/2020/4745726 ↗
3. V. Sivaprakash, R. Narayanan, Synthesis of TiO$$_2$$ nanotubes via electrochemical anodization with different water content. Mater. Today Proc. 37, 142–146 (2021). https://doi.org/10.1016/j.matpr.2020.04.65710.1016/j.matpr.2020.04.657 ↗
4. D.M. Duc, L.V. Toan, V.C. Manh et al., Effect of anodization time on the structure, corrosion resistance, and biocompatibility of TiO$$_2$$ nanotubes formed at 5 $$^\circ $$C. J. Mater. Eng. Perform. (2026). https://doi.org/10.1007/s11665-026-13526-610.1007/s11665-026-13526-6 ↗
5. A. Sandoval-Amador, J. Niño, J.F. Lopez-Rincon et al., Influence of anodization conditions in hydrofluoric acid electrolyte on the optimization of TiO$$_2$$ nanotube surfaces. Appl. Phys. A 131, 609 (2025). https://doi.org/10.1007/s00339-025-08743-010.1007/s00339-025-08743-0 ↗
6. O. Zakir, A. Ait-Karra, R. Idouhli, M. Khadiri, B. Dikici, A. Aityoub, A. Abouelfida, A. Outzourhit, Effect of anodization time on the morphological, structural, electrochemical, and photocatalytic properties of anodic TiO$$_2$$ NTs. J. Solid State Chem. 322, 123939 (2023). https://doi.org/10.1016/j.jssc.2023.12393910.1016/j.jssc.2023.123939 ↗
7. S. Zhang, X. Gong, Q. Shi, G. Ping, H. Xu, A. Waleed, G. Li, CuO nanoparticle-decorated TiO$$_2$$ nanotube heterojunctions for direct synthesis of methyl formate via photo-oxidation of methanol. ACS Omega 5(26), 15942–15948 (2020). https://doi.org/10.1021/acsomega.0c0116910.1021/acsomega.0c01169 ↗
8. O. Zakir, A. Ait Karra, R. Idouhli et al., Fabrication and characterization of Ag- and Cu-doped TiO$$_2$$ nanotubes by in situ anodization method as an efficient photocatalyst. J. Solid State Electrochem. 26, 2247–2260 (2022). https://doi.org/10.1007/s10008-022-05237-410.1007/s10008-022-05237-4 ↗
9. M.T. Acar, H. Kovacı, A. Çelik, Improving the wettability and corrosion behavior of Cp-Ti by applying anodization surface treatment with the addition of boric acid, graphene oxide and hydroxyapatite. Mater. Today Commun. 31, 103683 (2022). https://doi.org/10.1016/j.mtcomm.2022.10368310.1016/j.mtcomm.2022.103683 ↗
10. K. Indira, U.K. Mudali, T. Nishimura et al., A review on TiO$$_2$$ nanotubes: influence of anodization parameters, formation mechanism, properties, corrosion behavior, and biomedical applications. J. Bio-Tribo-Corros. 1, 28 (2015). https://doi.org/10.1007/s40735-015-0024-x10.1007/s40735-015-0024-x ↗
11. J. Grotberg, A. Hamlekhan, A. Butt, S. Patel, D. Royhman, T. Shokuhfar, C. Sukotjo, C. Takoudis, M.T. Mathew, Thermally oxidized titania nanotubes enhance the corrosion resistance of Ti6Al4V. Mater. Sci. Eng., C 59, 677–689 (2016). https://doi.org/10.1016/j.msec.2015.10.05610.1016/j.msec.2015.10.056 ↗
12. K.F.L. Dos Anjos, C.D.C. da Silva, M.A.A. de Souza, A.B. de Mattos, L.C.B.B. Coelho, G. Machado, J.V. de Melo, R.C.B.Q. de Figueiredo, The deposition of a lectin from Oreochromis niloticus on the surface of titanium dioxide nanotubes improved the cell adhesion, proliferation, and osteogenic activity of osteoblast-like cells. Biomolecules 11(12), 1748 (2021). https://doi.org/10.3390/biom1112174810.3390/biom11121748 ↗
13. A. Laongdao, P. Mali, Shear bond strength of lithium disilicate bonded with various surface-treated titanium. Int. J. Dent. 2022, 4406703 (2022). https://doi.org/10.1155/2022/440670310.1155/2022/4406703 ↗
14. M. Misriyani, A. Wahab, P. Taba, J. Gunlazuardi, Effect of anodizing time and annealing temperature on photoelectrochemical properties of anodized TiO$$_2$$ nanotube for corrosion prevention application. Indones. J. Chem. 17(2), 219–227 (2017). https://doi.org/10.22146/ijc.2418310.22146/ijc.24183 ↗
15. I.C. Tatar, N. Cicek, Anodization of Ti6Al4V in water-ethylene glycol solution containing NH$$_4$$F and its corrosion behavior in Ringer’s solution. Int. J. Electrochem. Sci. 17, 220624 (2022). https://doi.org/10.20964/2022.06.3310.20964/2022.06.33 ↗
16. K. Mukta, M. Anca, S. Patrik, I. Ales, Influence of anodization parameters on morphology of TiO$$_2$$ nanostructured surfaces. Adv. Mater. Lett. 7, 23–28 (2016). https://doi.org/10.5185/AMLETT.2016.615610.5185/AMLETT.2016.6156 ↗
17. N.S. Leyland, J. Podporska-Carroll, J. Browne, S.J. Hinder, B. Quilty, S.C. Pillai, Highly efficient F, Cu doped TiO$$_2$$ antibacterial visible light active photocatalytic coatings to combat hospital-acquired infections. Sci. Rep. 6, 24770 (2016). https://doi.org/10.1038/srep2477010.1038/srep24770 ↗
18. S. Dai, L. Liu, Z. Wang, H. Deng, L. Zhou, J. Cui, Z. Su, L. Xu, L. Yao, P. Yang, UV-modified and dual-catalytic Cu porphyrin-loaded TiO$$_2$$ nanotubes with enhanced hemocompatibility and prevention of stent restenosis. Mater. Today Commun. 35, 106297 (2023). https://doi.org/10.1016/j.mtcomm.2023.10629710.1016/j.mtcomm.2023.106297 ↗
19. C. Dames, B. Poudel, W.Z. Wang, J.Y. Huang, Z.F. Ren, Y. Sun, J.I. Oh, C. Opeil, M.J. Naughton, G. Chen, Low-dimensional phonon specific heat of titanium dioxide nanotubes. Appl. Phys. Lett. 87, 031901 (2005). https://doi.org/10.1063/1.199026910.1063/1.1990269 ↗
20. Y. Wang, T. Feng, X. Li, L. Li, Thermochemistry of nano-phased titanium dioxides relevant to energy application: A review. Chem. Thermodyn. Therm. Anal. 5, 10003 (2022). https://doi.org/10.1016/j.ctta.2021.1000310.1016/j.ctta.2021.10003 ↗
21. T. Feng, L. Li, Q. Shi, Y. Zhang, G. Li, Heat capacity and thermodynamic functions of TiO$$_2$$(H). J. Chem. Thermodyn. 145, 106040 (2020). https://doi.org/10.1016/j.jct.2019.10604010.1016/j.jct.2019.106040 ↗
22. H.M. Mateus, J. Barba-Ortega, M.R. Joya, Comparison of the growth of TiO$$_2$$ nanotubes in different solutions. J. Inorg. Organomet. Polym Mater. 28, 612–623 (2018). https://doi.org/10.1007/s10904-018-0783-110.1007/s10904-018-0783-1 ↗
23. H.M. Mateus, J. Bautista-Ruiz, J. Barba-Ortega, M.R. Joya, Formation of titanium oxide nanotube arrays by controlling H$$_2$$O and time through anodic oxidation. Rasayan J. Chem. 12, 1304–1314 (2019). https://doi.org/10.31788/RJC.2019.123526510.31788/RJC.2019.1235265 ↗
24. M.R. Joya, J. Barba-Ortega, E.C. Paris, Obtención de muestras de óxidos a bajo costo. Rev. UIS Ing. 18(3), 33–37 (2019). https://doi.org/10.18273/revuin.v18n3-20190010.18273/revuin.v18n3-201900 ↗
25. J. Bautista-Ruiz, W. Aperador, M.R. Joya, Electrochemical impedance, cyclic voltammetry, and corrosive behavior in TiO$$_2$$ nanostructures. Rasayan J. Chem. 13(4), 2092–2098 (2020). https://doi.org/10.31788/RJC.2020.134585410.31788/RJC.2020.1345854 ↗
26. W.A. Aperador-Chaparro, J. Barba-Ortega, M.R. Rincón-Joya, Optimization of corrosion resistance of anodized TiO$$_2$$ coatings through controlled calcination parameters. Rev. Acad. Colomb. Cienc. Exactas Fís. Nat. 48(188), 483–490 (2024). https://doi.org/10.18257/raccefyn.265210.18257/raccefyn.2652 ↗
27. H.-S. Heo, S.-J. Kim, Investigation of electrochemical characteristics and interfacial contact resistance of TiN-coated titanium as bipolar plate in polymer electrolyte membrane fuel cell. Coatings 13, 123 (2023). https://doi.org/10.3390/coatings1301012310.3390/coatings13010123 ↗
28. H. Sopha, Z. Spotz, M. Sepúlveda, M. Alijani, M. Motola, L. Hromadko, J.M. Macak, Intrinsic properties of anodic TiO$$_2$$ nanotube layers: In-situ XRD annealing of TiO$$_2$$ nanotube layers. Ceram. Int. 49(14), 24293–24301 (2023). https://doi.org/10.1016/j.ceramint.2022.11.03210.1016/j.ceramint.2022.11.032 ↗
29. M.Y. Roshchina, C.J. Querebillo, E. Dmitrieva, A. Voss, N. Israel, T. Gemming, L. Giebeler, S. Pilz, S. Roeher, V. Hoffmann, M. Hantusch, I.M. Weidinger, A. Gebert, Corrosion behavior of an oxide nanotube-coated $$\beta $$-type Ti-45Nb implant alloy in a simulated inflammatory solution. Corros. Sci. 227, 111767 (2024). https://doi.org/10.1016/j.corsci.2023.11176710.1016/j.corsci.2023.111767 ↗
30. S. Ait Ali Yahia, L. Hamadou, A. Kadri, N. Benbrahim, E.M.M. Sutter, Effect of anodizing potential on the formation and EIS characteristics of TiO$$_2$$ nanotube arrays. J. Electrochem. Soc. 159(4), K83–K90 (2012). https://doi.org/10.1149/2.077204jes10.1149/2.077204jes ↗
31. M. Yoon, Y. Park, H. Sim, H.R. Kwon, Y. Lee, H.W. Jang, S.-Y. Choi, J. Son, 2D vacancy confinement in anatase TiO$$_2$$ for enhanced photocatalytic activities. Adv. Mater. 37(15), 2413062 (2025). https://doi.org/10.1002/adma.20241306210.1002/adma.202413062 ↗
32. N. Madima, N.M. Chauke, S. Ngqoloda, O.K. Mmelesi, M. Raphulu, Recent advances in the development of defective black TiO$$_2$$ nanomaterials for application in energy and environmental sustainability: A review. Results Eng. 26, 104868 (2025). https://doi.org/10.1016/j.rineng.2025.10486810.1016/j.rineng.2025.104868 ↗
33. J.A. Benavides-Guerrero, P. Fourmont, L.F. Gerlein, A.C. Angel-Ospina, F. Machuca-Martinez, F. Vaussenat, C.A. Ross, S.G. Cloutier, Black anatase-TiO$$_2$$ electrodes for sun-activated photocatalytic degradation of organic water contaminants. Surf. Interfaces. 58, 105849 (2025). https://doi.org/10.1016/j.surfin.2025.10584910.1016/j.surfin.2025.105849 ↗
34. M.A. Hossen, A. Abd Aziz, R. Ramadhan Ikreedeegh, A.D. Muhammad, N. Yaacof, K.H. Leong, L. Wu, Optimization of anodizing parameters for the morphological properties of TiO$$_2$$ nanotubes based on response surface methodology. Results Mater. 14, 100061 (2024). https://doi.org/10.1016/j.rinma.2023.10006110.1016/j.rinma.2023.100061 ↗
35. P. Roy, S. Berger, P. Schmuki, TiO$$_2$$ nanotubes: synthesis and applications. Angew. Chem. Int. Ed. 50, 2904–2939 (2011). https://doi.org/10.1002/anie.20100137410.1002/anie.201001374 ↗
36. S.P. Gajagouni, I. Barsoum, S.O. Cho, A. Alfantazi, Corrosion behavior of anodized nanoporous TiO$$_2$$ films in oxidizing environments: A study on electrochemically engineered titanium surfaces. Nanoscale Adv. 7(23), 7579–7587 (2025)10.1039/D5NA00883B ↗
37. I. Paramasivam, H. Jha, N. Liu, P. Schmuki, A review of photocatalysis using self-organized TiO$$_2$$ nanotubes and other ordered oxide nanostructures. Small 8, 3073–3103 (2012). https://doi.org/10.1002/smll.20120056410.1002/smll.201200564 ↗
38. C.-C. Chiang, J.-S. Li, H.-H. Wan, F. Ren, J.F. Esquivel-Upshaw, Fabrication of TiO$$_2$$ nanotube arrays by progressive anodization of Ti thin film on insulated substrates. Materials. 18(6), 1219 (2025). https://doi.org/10.3390/ma1806121910.3390/ma18061219 ↗
39. U. Diebold, The surface science of titanium dioxide. Surf. Sci. Rep. 48(5–8), 53–229 (2003). https://doi.org/10.1016/S0167-5729(02)00100-010.1016/S0167-5729(02)00100-0 ↗
40. Y. Zhang, W. Wu, K. Zhang, C. Liu, A. Yu, M. Peng, J. Zhai, Raman study of 2D anatase TiO$$_2$$ nanosheets. Phys. Chem. Chem. Phys. 18, 32178–32184 (2016). https://doi.org/10.1039/C6CP05496J10.1039/C6CP05496J ↗
41. S. Harini, G. Gupta, S.C. Roy, R. Yalavarthi, TiO$$_2$$ multi-leg nanotubes for surface-enhanced Raman scattering. J. Phys. D Appl. Phys. 57, 325106 (2024). https://doi.org/10.1088/1361-6463/ad42a910.1088/1361-6463/ad42a9 ↗
42. X. Pan, M.-Q. Yang, X. Fu, N. Zhang, Y.-J. Xu, Defective TiO$$_2$$ with oxygen vacancies: synthesis, properties and photocatalytic applications. Nanoscale 5, 3601–3614 (2013). https://doi.org/10.1039/C3NR00476G10.1039/C3NR00476G ↗
43. X. Che, L. Li, J. Zheng, G. Li, Q. Shi, Heat capacity and thermodynamic functions of brookite TiO$$_2$$. J. Chem. Thermodyn. 93, 45–51 (2016). https://doi.org/10.1016/j.jct.2015.09.01810.1016/j.jct.2015.09.018 ↗
44. A. Tari, The Specific Heat of Matter at Low Temperatures. (Imperial College Press, London, 2003). https://doi.org/10.1142/p25410.1142/p254 ↗
45. N.W. Ashcroft, N.D. Mermin, Solid State Physics (Holt, Rinehart and Winston, New York, 1976)
46. E.J. Cope, J. Bustamante, Z.M. Johnson, R. Gurunathan, J. George, M.T. Agne, Heat capacity estimation of complex materials for energy technologies. J. Mater. Chem. A. 9, 102054 (2025)