journal article·2020-09Open access

Self-aligned concentrating immersion-lens arrays for patterning and efficiency recovery in scaffold-reinforced perovskite solar cells

Adam D. Printz, Oliver Zhao, Stephen Hamann, Nicholas Rolston, Olav Solgaard, Reinhold H. Dauskardt

Abstract

Abstract Unlike existing silicon, CIGS, and multi-junction cells that exhibit remarkable mechanical durability, perovskite solar cells have been shown to delaminate when subjected to the mechanical loads that occur during processing and field exposures, limiting their potential as a reliable solar technology. Mechanical reinforcement is thus essential for durable and reliable perovskite technologies. A recent strategy to overcome the thermomechanical fragility of perovskite solar cells is to extrinsically shield them by introducing reinforcing scaffolds which partition the cell into many distinct microcells, but improvements in mechanical stability coincide with a reduced device efficiency due to parasitic absorption by the scaffold. We address this reduced efficiency by integrating concentrating immersion-lens arrays (CILAs) into scaffold-reinforced solar cells. These scaffolds are lithographically patterned by a maskless process, in which ultraviolet light is used to pattern the scaffolds through the CILAs, ensuring self-alignment and optical contact with the microcells. This process creates mm-scale scaffold patterns with a line edge roughness of 17.5 ± 4.3 µm and line width roughness of 26.4 ± 8.5 µm. Perovskite devices are deposited into the microcells, and during operation, light is concentrated into the microcells and away from the insulating scaffolds, resulting in mechanically resilient solar cells with efficiencies comparable to planar devices. The devices with the strongest lenses—i.e., lower radius of curvature—recover up to 89 ± 15% of photocurrent and 91 ± 29% power conversion efficiency that would have been otherwise lost to parasitic absorption. Ray-tracing simulations of the CILAs also demonstrate passive tracking of incident light which is critical for optimal power output as the sun moves across the sky during the day. In these simulations, devices with CILAs showed improved passive tracking compared to devices without CILAs out to 60° off-normal. The UV stability of CILAs are experimentally verified through aging tests which show no change in their mechanical integrity after 1000 h of UV exposure. The simplicity of the fabrication process and the efficiency of the resulting scaffolded devices show that a lens-integrated scaffold-reinforced structure is a potential pathway to high-performance, robust, commercially viable perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Electron-hole diffusion lengths >175 um in solution-grown CH3 NH3 PbI3 single crystals10.1126/science.aaa5760 ↗
2. Extra long electron–hole diffusion lengths in CH3NH3PbI3xClx perovskite single crystals10.1039/C7TC02802D ↗
3. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
4. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
5. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
6. Unusual defect physics in CH 3 NH 3 PbI 3 perovskite solar cell absorber10.1063/1.4864778 ↗
7. Vertical TiO2 nanorods as a medium for stable and high-efficiency perovskite solar modules10.1021/acsnano.5b03265 ↗
8. Few-layer MoS2 flakes as active buffer layer for stable perovskite solar cells10.1002/aenm.201600920 ↗
9. Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules10.1038/s41560-018-0153-9 ↗
10. Measuring aging stability of perovskite solar cells10.1016/j.joule.2018.05.005 ↗
11. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
12. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
13. Giant switchable photovoltaic effect in organometal trihalide perovskite devices10.1038/nmat4150 ↗
14. Photovoltaic switching mechanism in lateral structure hybrid perovskite solar cells10.1002/aenm.201500615 ↗
15. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
16. Mechanical integrity of solution-processed perovskite solar cells10.1016/j.eml.2016.06.006 ↗
17. Effect of cation composition on the mechanical stability of perovskite solar cells10.1002/aenm.201702116 ↗
18. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
19. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell10.1002/aenm.201501310 ↗
20. CH3 NH2 gas induced (110) preferred cesium-containing perovskite films with reduced PbI6 octahedron distortion and enhanced moisture stability10.1039/C6TA10444D ↗
21. Mapping electric field-induced switchable poling and structural degradation in hybrid lead halide perovskite thin films10.1002/aenm.201500962 ↗
22. Thermal and environmental stability of semi-transparent perovskite solar cells for tandems enabled by a solution-processed nanoparticle buffer layer and sputtered ITO electrode10.1002/adma.201505279 ↗
23. Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers10.1126/science.aah4046 ↗
24. Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air10.1039/C7TA09178H ↗
25. Towards oxide electronics: a roadmap10.1016/j.apsusc.2019.03.312 ↗
26. Unveiling the importance of precursor preparation for highly efficient and stable phenethylammonium‐based perovskite solar cells
27. An overview of the decompositions in organo-metal halide perovskites and shielding with 2-dimensional perovskites10.1016/j.rser.2019.04.022 ↗
28. A large area (70cm 2) monolithic perovskite solar module with a high efficiency and stability10.1039/C6EE02693A ↗
29. Scaffold-reinforced perovskite compound solar cells10.1039/C7EE02185B ↗
30. Photonic-structured TiO2 for high-efficiency, flexible and stable perovskite solar cells10.1016/j.nanoen.2019.02.023 ↗
31. Templated microstructural growth of perovskite thin films via colloidal monolayer lithography10.1039/C5EE01169H ↗
32. Koshel · 2013
33. The thermodynamic limits of light concentrators10.1016/0165-1633(90)90047-5 ↗
34. Drude · 1902
35. 3D printed optics with nanometer scale surface roughness10.1038/s41378-018-0015-4 ↗
36. Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs10.1038/nmat2287 ↗
37. High-efficiency thin and compact concentrator photovoltaics using micro-solar cells with via-holes sandwiched between thin lens-array and circuit board10.7567/JJAP.53.04ER01 ↗
38. Experimental measurements of a prototype high concentration Fresnel lens CPV module for the harvesting of diffuse solar radiation10.1364/OE.22.000A28 ↗
39. Light management in perovskite solar cells and organic LEDs with microlens arrays10.1364/OE.25.010704 ↗
40. Adhesive lithography for fabricating organic electronic and optoelectronics devices10.1039/c1nr10039d ↗
41. Large-area sub-wavelength optical patterning via long-range ordered polymer lens array10.1021/acsami.6b01990 ↗
42. Connectivity of features in microlens array reduction photolithography: generation of various patterns with a single photomask10.1021/ja020551k ↗
43. Fabrication of nonperiodic metasurfaces by microlens projection lithography10.1021/acs.nanolett.6b00952 ↗
44. Planar micro-optic solar concentrator10.1364/OE.18.001122 ↗
45. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
46. Prospects for concentrator solar cells10.1002/advs.201700792 ↗
47. UV degradation and recovery of perovskite solar cells10.1038/srep38150 ↗
48. Immersion graded index optics for passive solar concentrators
49. Optical design of microlens array for CMOS image sensors
50. Microlens design for CMOS image sensor
51. Norland Optical Adhesive 61, (n.d.). https://www.norlandprod.com/adhesives/noa61.htm.