Recent progress on defect modulation for highly efficient metal halide perovskite light-emitting diodes
Source abstract
Abstract
Abstract Metal halide perovskites (MHPs) are received widespread attention due to their high photoluminescence quantum yield (PLQY), narrow emission linewidths, tunable emission colors, and low cost. However, the non-radiative recombination loss caused by defects is a bottleneck restricting the efficiency improvement of MHP-based light-emitting diodes (PeLEDs). In this review, initially, we summarize characteristics of typical defect types that cause PeLEDs efficiency degradation, and demonstrate the effect on the carrier recombination mechanism. Then, we highlight the recent progress of typical defect suppression strategies for obtaining highly efficient PeLEDs, including crystal growth regulation, composition engineering, passivation and dimensional regulation. Finally, we look forward to the future development direction and make suggestions for how to further improve device efficiency. This review is expected to promote the development of PeLEDs and provide a significance guidance for fabricating highly efficient devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. 50-Fold EQE Improvement up to 6.27% of Solution-Processed All-Inorganic Perovskite CsPbBr3 QLEDs via Surface Ligand Density Control
2. Organic-Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48%10.1002/adma.201805409 ↗
3. Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)10.1002/adma.201502567 ↗
4. High-Efficiency and Air-Stable Perovskite Quantum Dots Light-Emitting Diodes with an All-Inorganic Heterostructure
5. Room-Temperature Triple-Ligand Surface Engineering Synergistically Boosts Ink Stability, Recombination Dynamics, and Charge Injection toward EQE-11.6% Perovskite QLEDs10.1002/adma.201800764 ↗
6. Stable, Efficient Red Perovskite Light-Emitting Diodes by (α, δ)-CsPbI3 Phase Engineering10.1002/adfm.201804285 ↗
7. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
8. Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport10.1016/j.scib.2020.08.025 ↗
9. Rational molecular passivation for high-performance perovskite light-emitting diodes10.1038/s41566-019-0390-x ↗
10. High Defect Tolerance in Lead Halide Perovskite CsPbBr310.1021/acs.jpclett.6b02800 ↗
11. Novel Lewis Base Cyclam Self-Passivation of Perovskites without an Anti-Solvent Process for Efficient Light-Emitting Diodes10.1021/acsami.0c02768 ↗
12. A bilateral interfacial passivation strategy promoting efficiency and stability of perovskite quantum dot light-emitting diodes10.1038/s41467-020-17633-3 ↗
13. Doping-Enhanced Short-Range Order of Perovskite Nanocrystals for Near-Unity Violet Luminescence Quantum Yield10.1021/jacs.8b04763 ↗
14. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation10.1038/s41467-018-02978-7 ↗
15. Defect-Assisted Photoinduced Halide Segregation in Mixed-Halide Perovskite Thin Films10.1021/acsenergylett.7b00282 ↗
16. Self-assembly of a robust hydrogen-bonded octylphosphonate network on cesium lead bromide perovskite nanocrystals for light-emitting diodes10.1039/C9NR02566A ↗
17. Multifunctional Charge Transporting Materials for Perovskite Light-Emitting Diodes10.1002/adma.202002176 ↗
18. It's a trap! On the nature of localised states and charge trapping in lead halide perovskites10.1039/C9MH00500E ↗
19. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
20. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
21. Iodine interstitials as a cause of nonradiative recombination in hybrid perovskites
22. Recombination dynamics study on nanostructured perovskite light-emitting devices10.1002/adma.201801370 ↗
23. Nonradiative losses in metal halide perovskites10.1021/acsenergylett.7b00239 ↗
24. Recombination kinetics in organic-inorganic perovskites: excitons, free charge, and subgap states10.1103/PhysRevApplied.2.034007 ↗
25. Charge-carrier dynamics and mobilities in formamidinium lead mixed-halide perovskites10.1002/adma.201502969 ↗
26. Charge-carrier dynamics in vapour-deposited films of the organolead halide perovskite CH3NH3Pbl3-xClx10.1039/C4EE01358A ↗
27. First-principles study of intrinsic defects in formamidinium lead triiodide perovskite solar cell absorbers10.1039/C8CP00280K ↗
28. Overcoming the doping bottleneck in semiconductors10.1016/j.commatsci.2004.02.024 ↗
29. Assessment of correction methods for the band-gap problem and for finite-size effects in supercell defect calculations: Case studies for ZnO and GaAs10.1103/PhysRevB.78.235104 ↗
30. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
31. First-principles study of ion diffusion in perovskite solar cell sensitizers10.1021/jacs.5b03615 ↗
32. The role of oxygen in the degradation of methylammonium lead trihalide perovskite photoactive layers10.1002/ange.201503153 ↗
33. Highly efficient blue-emitting CsPbBr3 perovskite nanocrystals through neodymium doping
34. Light-induced annihilation of Frenkel defects in organo-lead halide perovskites10.1039/C6EE01504B ↗
35. Influence of growth temperature on bulk and surface defects in hybrid lead halide perovskite films10.1039/C5NR06222E ↗
36. Giant efficiency and color purity enhancement in multicolor inorganic perovskite light-emitting diodes via heating-assisted vacuum deposition10.1088/1674-4926/41/5/052205 ↗
37. A formamidinium-methylammonium lead iodide perovskite single crystal exhibiting exceptional optoelectronic properties and long-term stability10.1039/C7TA04608A ↗
38. Large grained perovskite solar cells derived from single-crystal perovskite powders with enhanced ambient stability10.1021/acsami.6b02169 ↗
39. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
40. Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination10.1038/nphoton.2015.156 ↗
41. Electron-hole diffusion lengths >175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
42. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
43. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
44. Unravelling the effects of grain boundary and chemical doping on electron-hole recombination in CH3NH3PbI3 perovskite by time-domain atomistic simulation10.1021/jacs.6b00645 ↗
45. Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber10.1063/1.4864778 ↗
46. Defect passivation of organic-inorganic hybrid perovskites by diammonium iodide toward high-performance photovoltaic devices10.1021/acsenergylett.6b00327 ↗
47. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
48. A deconvoluted PL approach to probe the charge carrier dynamics of the grain interior and grain boundary of a perovskite film for perovskite solar cell applications10.1039/C7CP01140G ↗
49. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
50. Do grain boundaries dominate non-radiative recombination in CH3NH3PbI3 perovskite thin films?10.1039/C6CP08770A ↗
51. Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells10.1038/s41467-018-04029-7 ↗
52. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
53. Enhanced performance of perovskite light-emitting diodes via diamine interface modification10.1021/acsami.9b11866 ↗
54. Interfacial engineering for highly efficient quasi-two dimensional organic-inorganic hybrid perovskite light-emitting diodes10.1039/C8TC06490C ↗
55. Interfacial engineering with Ultrathin poly (9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) layer for high efficient perovskite light-emitting diodes
56. Amine-based passivating materials for enhanced optical properties and performance of organic-inorganic perovskite in light-emitting diodes10.1021/acs.jpclett.7b00372 ↗
57. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of Lead(II) Iodide10.1021/jacs.5b04930 ↗
58. Halide-rich synthesized cesium lead bromide perovskite nanocrystals for light-emitting diodes with improved performance10.1021/acs.chemmater.7b00692 ↗
59. Thermally Stable Copper(II)-doped cesium lead halide perovskite quantum dots with strong blue emission10.1021/acs.jpclett.9b00290 ↗
60. How important is the organic part of lead halide perovskite photovoltaic cells? efficient CsPbBr3 cells10.1021/acs.jpclett.5b00968 ↗
61. Efficient blue perovskite light-emitting diodes boosted by 2D/3D energy cascade channels
62. Oligomeric silica-wrapped perovskites enable synchronous defect passivation and grain stabilization for efficient and stable perovskite photovoltaics10.1021/acsenergylett.9b00608 ↗
63. Highly stable hybrid perovskite solar cells modified with polyethylenimine via ionic bonding
64. Solvent-mediated crystallization of CH3NH3SnI3 films for heterojunction depleted perovskite solar cells10.1021/jacs.5b06658 ↗
65. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition10.1039/C4EE01624F ↗
66. Tuning molecular interactions for highly reproducible and efficient formamidinium perovskite solar cells via adduct approach10.1021/jacs.8b01037 ↗
67. Solvent effect on the hole-conductor-free fully printable perovskite solar cells10.1016/j.nanoen.2016.06.047 ↗
68. Chemical Pathways Connecting Lead(II) Iodide and Perovskite via Polymeric Plumbate(II) Fiber10.1021/jacs.5b10599 ↗
69. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
70. Efficient quasi-two-dimensional perovskite light-emitting diodes with improved multiple quantum well structure10.1021/acsami.9b10186 ↗
71. Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells10.1021/nn505978r ↗
72. Optimizing the electrical transport properties of InBr via pressure regulation10.1063/1.5049628 ↗
73. The presence of CH3NH2 neutral species in organometal halide perovskite films10.1063/1.4941994 ↗
74. Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis10.1039/C6EE02016J ↗
75. Prospects for mitigating intrinsic organic decomposition in methylammonium lead triiodide perovskite10.1021/acs.jpclett.8b00323 ↗
76. First-principles analysis of radiative recombination in lead-halide perovskites10.1021/acsenergylett.8b01297 ↗
77. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell10.1002/aenm.201501310 ↗
78. High-efficiency rubidium-incorporated perovskite solar cells by gas quenching10.1021/acsenergylett.6b00697 ↗
79. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
80. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
81. Spontaneous silver doping and surface passivation of CsPbI3 perovskite active layer enable light-emitting devices with an external quantum efficiency of 11.2%10.1021/acsenergylett.8b00835 ↗
82. Highly efficient sky-blue light-emitting diodes based on Cu-treated halide perovskite nanocrystals10.1039/D0TC03042B ↗
83. A zinc non-halide dopant strategy enables efficient perovskite CsPbI3 quantum dot-based light-emitting diodes10.1039/C9QM00734B ↗
84. Stabilizing cesium lead halide perovskite lattice through Mn(II) substitution for air-stable light-emitting diodes10.1021/jacs.7b04000 ↗
85. Can B-site doping or alloying improve thermal- and phase-stability of all-inorganic CsPbX3 (X = Cl, Br, I) Perovskites?10.1021/acsenergylett.7b01197 ↗
86. Efficient perovskite solar cells fabricated by Co partially substituted hybrid perovskite10.1002/aenm.201703178 ↗
87. Tailoring metal halide perovskites through metal substitution: influence on photovoltaic and material properties10.1039/C6EE03201J ↗
88. Bright blue light emission of Ni2+ Ion-Doped CsPbClxBr3-x perovskite quantum dots enabling efficient light-emitting devices10.1021/acsami.0c01074 ↗
89. Enhanced performance of perovskite solar cells with zinc chloride additives10.1021/acsami.7b15310 ↗
90. Exciton-to-Dopant energy transfer in Mn-Doped Cesium Lead Halide Perovskite Nanocrystals10.1021/acs.nanolett.6b02772 ↗
91. Orange to red, emission-tunable Mn-Doped two-dimensional perovskites with high luminescence and stability10.1021/acsami.9b11665 ↗
92. Postsynthesis Doping of Mn and Yb into CsPbX3 (X = Cl, Br, or I) perovskite nanocrystals for downconversion emission10.1021/acs.chemmater.8b03066 ↗
93. Mn2+-Doped lead halide perovskite nanocrystals with dual-color emission controlled by halide content10.1021/jacs.6b08085 ↗
94. Mn Doping CsPbI3 film towards high-efficiency solar cell10.1021/acsaem.9b02468 ↗
95. Efficient blue and white perovskite light-emitting diodes via manganese doping10.1016/j.joule.2018.08.005 ↗
96. Anchored ligands facilitate efficient B-site doping in metal halide perovskites10.1021/jacs.9b02565 ↗
97. Room temperature synthesis of Mn-Doped cesium lead halide quantum dots with high Mn substitution ratio10.1021/acs.jpclett.7b01820 ↗
98. Facile method to reduce surface defects and trap densities in perovskite photovoltaics10.1021/acsami.7b05133 ↗
99. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
100. Shift happens. how halide ion defects influence photoinduced segregation in mixed halide perovskites10.1021/acsenergylett.7b00357 ↗