Dissolvable photovoltaic cells on hydrogel
Source abstract
Abstract
Solar energy is potentially the largest source of renewable energy for providing electrical power for human society. However, significant advances are required to make photovoltaic technologies have a low-carbon footprint in manufacture, be environmentally friendly at the end of their lives through recyclability, and be biodegradable. Here we report dissolvable organic photovoltaic devices based on poly(2-hydroxyethyl methacrylate), which show equal power conversion efficiency to their glass substrate-based counterparts. We use a novel method of including smectic liquid crystal (7-dioctyl[1]benzothieno[3,2- b][1]benzothiophene, C8-BTBT) as a crystal phase regulator in the heterojunction donor:acceptor polymer system to maintain the disposable organic solar cell efficiency without pre- or post-thermal annealing. The results show strong promise not only for more sustainable solar-cell fabrication but also as disposable and biocompatible solar cells for self-powered (energy harvesting) wearable and biomedical devices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University 1 , Shenzhen 518060, China
Electrical Engineering Division, Department of Engineering, University of Cambridge 2 , 9 JJ Thomson Avenue, Cambridge CB30FA, United Kingdom
School of Physics and Astronomy, Cardiff University 3 , The Parade, Cardiff CF24 3AA, United Kingdom
School of Engineering and Materials Science (SEMS), Queen Mary University of London 4 , London E1 4NS, United Kingdom
School of Engineering, Cardiff University 5 , The Parade, Cardiff CF24 3AA, United Kingdom
Zhejiang University – University of Illinois Urbana Champagne Institute (ZJUI); School of Information Science and Electronic Engineering, Zhejiang University International Campus 6 , Haining, China
References (55)
Show source-provided references
1. Recent advances in wearable self-powered energy systems based on flexible energy storage devices integrated with flexible solar cells10.1039/d1ta02493k ↗
2. 19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition10.1038/s41467-023-37526-5 ↗
3. Record indoor performance of organic photovoltaics with long-term stability enabled by self-assembled monolayer-based interface management10.1016/j.nanoen.2023.108429 ↗
4. Indoor photovoltaics, the next big trend in solution-processed solar cells10.1002/inf2.12180 ↗
5. Recent progress in silicon photovoltaic module recycling processes10.1016/j.resconrec.2022.106612 ↗
6. Bio-derived materials as a green route for precious & critical metal recovery and re-use10.1039/c4gc02483d ↗
7. Proof-of-concept for facile perovskite solar cell recycling10.1039/c6ee02013e ↗
8. Toxicity, leakage, and recycling of lead in perovskite photovoltaics10.1002/aenm.202204144 ↗
9. Recent progress in solution-processed flexible organic photovoltaics10.1038/s41528-022-00222-3 ↗
10. Current international research into cellulose as a functional nanomaterial for advanced applications10.1007/s10853-022-06903-8 ↗
11. Significance of flexible substrates for wearable and implantable devices: Recent advances and perspectives10.1002/admt.202100773 ↗
12. Flexible, biodegradable and recyclable solar cells: A review10.1007/s10854-018-0397-y ↗
13. Biodegradable elastomers and gels for elastic electronics10.1002/advs.202105146 ↗
14. Biodegradable and biocompatible polymers for electronic applications: A review10.1177/0883911518818075 ↗
15. Supramolecular adhesive hydrogels for tissue engineering applications10.1021/acs.chemrev.1c00815 ↗
16. Flexible electronics and devices as human–machine interfaces for medical robotics10.1002/adma.202107902 ↗
17. Liquid crystals in photovoltaics: A new generation of organic photovoltaics10.1038/pj.2016.109 ↗
18. Effects of nematic liquid crystal additives on the performance of polymer solar cells10.1002/macp.201000379 ↗
19. Fabrication of micro and sub-micrometer wrinkled hydrogel surfaces through thermal and photocrosslinking processes10.1016/j.polymer.2016.08.051 ↗
20. Improvement of organic solar cells by flexible substrate and ITO surface treatments10.1016/j.apsusc.2010.06.011 ↗
21. Flexible ITO films with atomically flat surfaces for high performance flexible perovskite solar cells10.1039/c8nr06586a ↗
22. Thermal analysis of poly (2-hydroxyethyl methacrylate)(pHEMA) hydrogels10.1023/a:1021589017753 ↗
23. Highly efficient all-small-molecule organic solar cells with appropriate active layer morphology by side chain engineering of donor molecules and thermal annealing10.1002/adma.201908373 ↗
24. Annealing dependent performance of organic bulk-heterojunction solar cells: A theoretical perspective10.1016/j.solmat.2011.07.006 ↗
25. 2022
26. Order, viscoelastic, and dielectric properties of symmetric and asymmetric alkyl[1]benzothieno[3,2-b] [1]benzothiophenes10.1021/jp412422e ↗
27. Reversibility of temperature driven discrete layer-by-layer formation of dioctyl-benzothieno-benzothiophene films10.1039/c6sm02541b ↗
28. Tuning aggregation of poly(3-hexylthiophene) within nanoparticles10.1021/nn305207b ↗
29. A study of donor/acceptor interfaces in a blend of P3HT/PCBM solar cell: Effects of annealing and PCBM loading on optical and electrical properties10.1016/j.sse.2013.05.005 ↗
30. Modeling disorder in polymer aggregates: The optical spectroscopy of regioregular poly(3-hexylthiophene) thin films10.1063/1.1914768 ↗
31. Absorption and crystallinity of poly(3-hexylthiophene)/fullerene blends in dependence on annealing temperature10.1016/j.tsf.2005.12.064 ↗
32. Raman spectroscopic studies of regioregular poly(3-alkylthiophenes)10.1021/jp960104p ↗
33. Intra- and interchain luminescence in amorphous and semicrystalline films of phenyl-substituted polythiophene10.1021/jp010511n ↗
34. Exciton transfer integrals between polymer chains10.1063/1.2714516 ↗
35. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
36. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene):fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
37. Marangoni effect-controlled growth of oriented film for high performance C8-BTBT transistors10.1002/admi.201801736 ↗
38. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
39. Photoinduced carrier generation in P3HT/PCBM bulk heterojunction materials10.1021/jp075565x ↗
40. P3HT:PCBM bulk-heterojunctions: Observing interfacial and charge transfer states with surface photovoltage spectroscopy10.1021/jp500226u ↗
41. Interfacial chemical and electronic structure of cobalt deposition on 2,7-dioctyl[1]benzothieno[3,2-b]benzothiophene (C8-BTBT)10.1016/j.apsusc.2017.01.074 ↗
42. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
43. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
44. Temperature dependence of ideality factors in organic solar cells and the relation to radiative efficiency10.1002/aenm.201502230 ↗
45. Achieving a high fill factor for organic solar cells10.1039/c6ta00126b ↗
46. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C6010.1063/1.1895473 ↗
47. The fill factor of a solar cell from a mathematical point of view10.1016/0379-6787(83)90067-4 ↗
48. Sustainable system for raw-metal recovery from crystalline silicon solar panels: From noble-metal extraction to lead removal10.1021/acssuschemeng.6b00894 ↗
49. Kinetics and thermodynamics of the water sorption of 2-hydroxyethyl methacrylate/styrene copolymer hydrogels10.1002/app.28403 ↗
50. Determination of the P3HT:PCBM solubility parameters via a binary solvent gradient method: Impact of solubility on the photovoltaic performance10.1016/j.solmat.2012.01.005 ↗
51. Organic solar cells on paper substrates10.1002/admt.201900184 ↗
52. Adaptation mechanisms of microorganisms to the toxic effects of organic solvents on membranes10.1016/s0304-4157(96)00010-x ↗
53. Large scale deployment of polymer solar cells on land, on sea and in the air10.1039/c3ee43212b ↗
54. Are green solvents truly green? Integrating life cycle assessment and techno-economic analysis for sustainable membrane fabrication10.1039/d3gc00776f ↗
55. Mechanisms of resistance of whole cells to toxic organic solvents10.1016/0167-7799(94)90029-9 ↗