journal article·2024-04-01Open access

Effect of fabrication processes on BaTiO3 capacitor properties

Yizhe Jiang, Zishen Tian, Pravin Kavle, Hao Pan, Lane W. Martin

APL Materials· Volume 12· Issue 4

Abstract

There is an increasing desire to utilize complex functional electronic materials such as ferroelectrics in next-generation microelectronics. As new materials are considered or introduced in this capacity, an understanding of how we can process these materials into those devices must be developed. Here, the effect of different fabrication processes on the ferroelectric and related properties of prototypical metal oxide (SrRuO3)/ferroelectric (BaTiO3)/metal oxide (SrRuO3) heterostructures is explored. Two different types of etching processes are studied, namely, wet etching of the top SrRuO3 using a NaIO4 solution and dry etching using an Ar+-ion beam (i.e., ion milling). Polarization-electric-field hysteresis loops for capacitors produced using both methods are compared. For the ion-milling process, it is found that the Ar+ beam can introduce defects into the SrRuO3/BaTiO3/SrRuO3 devices and that the milling depth strongly influences the defect level and can induce a voltage imprint on the function. Realizing that such processing approaches may be necessary, work is performed to ameliorate the imprint of the hysteresis loops via ex situ “healing” of the process-induced defects by annealing the ferroelectric material in a barium-and-oxygen-rich environment via a chemical-vapor-deposition-style process. This work provides a pathway for the nanoscale fabrication of these candidate materials for next-generation memory and logic applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Ferroelectric and Negative Capacitance Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, University of California, Berkeley 1 , Berkeley, California 94720, USA

Materials Sciences Division, Lawrence Berkeley National Laboratory 2 , Berkeley, California 94720, USA

Departments of Materials Science and NanoEngineering, Chemistry, and Physics and Astronomy and Rice Advanced Materials Institute, Rice University 3 , Houston, Texas 77005, USA

Funding

U.S. Department of Energy · Army Research Office · Intel Corporation · DEVCOM Army Research Laboratory · National Science Foundation

References (52)

Show source-provided references
1. Benchmarking of beyond-CMOS exploratory devices for logic integrated circuits10.1109/jxcdc.2015.2418033 ↗
2. The past, the present, and the future of ferroelectric memories10.1109/ted.2020.2976148 ↗
3. The future of ferroelectric field-effect transistor technology10.1038/s41928-020-00492-7 ↗
4. Enabling ultra-low-voltage switching in BaTiO310.1038/s41563-022-01266-6 ↗
5. Wurtzite and fluorite ferroelectric materials for electronic memory10.1038/s41565-023-01361-y ↗
6. Electrode-induced degradation of Pb(ZrxTi1−x)O3 (PZT) polarization hysteresis characteristics in Pt/PZT/Pt ferroelectric thin-film capacitors10.1063/1.117956 ↗
7. Fatigued state of the Pt-PZT-Pt system10.1080/10584589708221682 ↗
8. The influence of the top-contact metal on the ferroelectric properties of epitaxial ferroelectric Pb(Zr0.2Ti0.8)O3 thin films10.1063/1.3021293 ↗
9. Ferroelectric properties of Pb(Zi, Ti)O3 capacitor with thin SrRuO3 films within both electrodes10.1143/jjap.39.2110 ↗
10. Epitaxial ferroelectric heterostructures fabricated by selective area epitaxy of SrRuO3 using an MgO mask10.1002/adma.201104697 ↗
11. Voltage shift and deformation in the hysteresis loop of Pb(Zr, Ti)O3 thin film by defects10.1063/1.117418 ↗
12. Electrical damage induced by ion beam etching of GaAs10.1116/1.584023 ↗
13. Nonstoichiometry, structure, and properties of Ba1−xTiOy thin films10.1039/c8tc02725k ↗
14. Ferroelectric properties of SrRuO3/BaTiO3/SrRuO3 ultrathin film capacitors free from passive layers10.1063/1.2174100 ↗
15. Coupled polarization and nanodomain evolution underpins large electromechanical responses in relaxors10.1038/s41567-022-01773-y ↗
16. Thermolysis of positive photoresists10.1117/12.941779 ↗
17. Enhanced electrical resistivity and properties via ion bombardment of ferroelectric thin films10.1002/adma.201603968 ↗
18. Variable resistor made by repeated steps of epitaxial deposition and lithographic structuring of oxide layers by using wet chemical etchants10.1016/j.tsf.2012.11.118 ↗
19. Reducing coercive-field scaling in ferroelectric thin films via orientation control10.1021/acsnano.8b01399 ↗
20. Characterization of deep wet etching of fused silica glass for single cell and optical sensor deposition10.1088/0960-1317/19/6/065013 ↗
21. Pyroelectric energy conversion with large energy and power density in relaxor ferroelectric thin films10.1038/s41563-018-0059-8 ↗
22. Direct measurement of pyroelectric and electrocaloric effects in thin films10.1103/physrevapplied.7.034025 ↗
23. Manipulating chiral-spin transport with ferroelectric polarization10.1038/s41563-024-01854-8NM23061978-T ↗
24. Ion beam etching of lead-zirconate-titanate thin films: Correlation between etching parameters and electrical properties evolution10.1063/1.1476970 ↗
25. Reactive ion etching damage to the electrical properties of ferroelectric thin films10.1557/jmr.1998.0048 ↗
26. Dry etching issues in the integration of ferroelectric thin film capacitors10.1557/proc-433-189 ↗
27. Minimization of non-uniform ion-thinning effects in thin film transverse specimens for transmission electron microscopy10.1557/proc-254-153 ↗
28. A. Augusto , “Optimization of the etching parameters of the ion milling system Nordiko 3600,” M.Sc. thesis, Universidade Técnica de Lisboa, Lisbon, 2007; available athttps://fenix.tecnico.ulisboa.pt/downloadFile/395137451448/Tese_andre_augusto.pdf
29. Uniform ion beam milling of a non-flat surface at off-normal incidence and four azimuths10.1111/j.1365-2818.2007.01737.x ↗
30. Ion beam etching redeposition for 3D multimaterial nanostructure manufacturing10.1038/s41378-019-0052-7 ↗
31. Dynamic study and experimental ‘two-step process’ of substrate step preparation for high-TC Josephson junctions10.1063/1.126019 ↗
32. The matrix effect in secondary ion mass spectrometry10.1016/j.apsusc.2018.01.065 ↗
33. The matrix effect in TOF-SIMS analysis of two-element inorganic thin films10.1039/c9ja00428a ↗
34. Deep-level transient spectroscopy: A new method to characterize traps in semiconductors10.1063/1.1663719 ↗
35. Enhancement of ferroelectric Curie temperature in BaTiO3 films via strain-induced defect dipole alignment10.1002/adma.201400254 ↗
36. Ferroelectric polarization reversal via successive ferroelastic transitions10.1038/nmat4119 ↗
37. Electronic transport and ferroelectric switching in ion-bombarded, defect-engineered BiFeO3 thin films10.1002/admi.201700991 ↗
38. Kinetic-energy induced smoothening and delay of epitaxial breakdown in pulsed-laser deposition10.1103/physrevb.76.085431 ↗
39. Large electric-field-induced strain in ferroelectric crystals by point-defect-mediated reversible domain switching10.1038/nmat1051 ↗
40. Defect-dipole alignment and tetragonal strain in ferroelectrics10.1063/1.362600 ↗
41. A review on conduction mechanisms in dielectric films10.1155/2014/578168 ↗
42. Dielectric and optical properties of melt-grown BaTiO310.1016/0022-3697(68)90164-9 ↗
43. Defect chemistry of donor-doped BaTiO310.1111/j.1151-2916.1984.tb18849.x ↗
44. Transition of compensating defect mode in niobium-doped barium titanate10.1111/j.1151-2916.1994.tb05362.x ↗
45. Micron-scaled spectral-resolved cathodoluminescence of grains in bariumtitanate ceramics10.1002/pssa.2210790114 ↗
46. Peak shape analysis of deep level transient spectra: An alternative to the Arrhenius plot10.1557/jmr.2019.70 ↗
47. Electrical and charge storage characteristics of the tantalum oxide-silicon dioxide device10.1109/t-ed.1978.19266 ↗
48. Thermodynamics of mono- and di-vacancies in barium titanate10.1063/1.2801011 ↗
49. Defect studies of doped and undoped barium titanate using computer simulation techniques10.1016/0022-3697(86)90182-4 ↗
50. The energy and elastic dipole tensor of defects in ionic crystals calculated by the supercell method10.1088/0022-3719/18/5/005 ↗
51. Sintering of PZT ceramics: I, atmosphere control10.1111/j.1151-2916.1983.tb15708.x ↗
52. A study of the effects of process variables on the properties of PZT films produced by a single-layer sol-gel technique10.1007/bf00362126 ↗