journal article·2026-05-01Open access

Dynamic characteristics of a piecewise damping passive vibration isolator based on translating cam mechanism

Xiaoting Zhang, Haijun Xing, Xiaosong Sun

AIP Advances· Volume 16· Issue 5

Abstract

This study proposes a passive vibration isolator with a piecewise damping characteristic based on a translating cam mechanism to address the trade-off between resonance suppression and high-frequency isolation in conventional linear systems. The proposed design enables zero damping at small displacements and activates damping beyond a prescribed threshold through the geometric segmentation of the cam profile. A nonlinear dynamic model of the system is established, and an equivalent damping formulation is derived based on cam kinematics. The dimensionless governing equations are obtained, and the amplitude–frequency response is analyzed using the method of averaging. Numerical simulations based on the fourth-order Runge–Kutta method are conducted for validation. The results show that the proposed isolator effectively reduces the resonance peak while maintaining low transmissibility in the high-frequency region. Compared to conventional linear damping systems, the optimized design achieves a reduction of 37.8% in resonance amplitude and a decrease of 15.3% in average high-frequency transmissibility. The analytical predictions are in good agreement with numerical results. These findings demonstrate that the proposed cam-based piecewise damping mechanism provides an effective purely mechanical solution for improving vibration isolation performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Vehicle Noise and Vibration Control · Aeroelasticity and Vibration Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Shijiazhuang Tiedao University 1 , Shijiazhuang 050043,

School of Civil Engineering, Hebei University of Science and Technology 2 , Shijiazhuang 050018,

Funding

National Natural Science Foundation of China

References (31)

Show source-provided references
1. Dynamic analysis of non-classically damped systems with distributed parameters10.1016/j.istruc.2025.110038 ↗
2. 2002
3. Design and performance experiment on passive variable damping energy dissipation device10.16385/j.cnki.issn.1004-4523.2020.05.002 ↗
4. Exploiting a novel magnetoelastic tunable bi-stable energy converter for vibration energy mitigation10.1007/s11071-024-10337-z ↗
5. A theoretical model for a low-frequency two-stage hybrid vibration isolator with a nonlinear energy sink and a negative stiffness spring10.1016/j.apm.2025.115948 ↗
6. Application of non-linear damping to vibration isolation: An experimental study10.1007/s11071-011-0274-1 ↗
7. Vibration performance and transmissibility of piecewise linear systems
8. H∞ control of periodic piecewise vibration systems with actuator saturation10.1177/1077546316629598 ↗
9. Theoretical investigations on the linear and nonlinear damping force for an eddy current damper combining with rack and gear10.1177/1077546320987787 ↗
10. A strategy of vibration control for rotors with dry friction dampers10.1177/10775463221093105 ↗
11. Cycle response characteristics research on a class of piecewise nonlinear elastic and damping double constraint system10.7498/aps.64.124601 ↗
12. Transmissibility characteristics of vibration isolation system with geometrically nonlinear viscous damping10.16450/j.cnki.issn.1004-6801.2023.06.021 ↗
13. Analysis of the dynamic behavior and performance of a vibration isolation system with geometric nonlinear friction damping10.6052/0459-1879-18-302 ↗
14. Some recent progresses in nonlinear passive isolations of vibrations10.6052/0459-1879-17-064 ↗
15. 1989
16. Study of the effects of cubic nonlinear damping on vibration isolations using harmonic balance method10.1016/j.ijnonlinmec.2011.09.013 ↗
17. Modeling and parameter analysis of a four-parameter isolation system based on frequency-dependent damping characteristics10.13465/j.cnki.jvs.2021.24.016 ↗
18. Study on the force transmissibility of vibration isolators with geometric nonlinear damping10.1007/s11071-013-1027-0 ↗
19. Revolutionary tuned mass damper by carbon fiber powder based shear thickening fluid to realize adaptive stiffness and damping10.1016/j.soildyn.2025.109732 ↗
20. Time-domain calculation method based on improved hysteretic damping model10.6052/j.issn.1000-4750.2020.05.0313 ↗
21. A comparison of two nonlinear damping mechanisms in a vibration isolator10.1016/j.jsv.2012.09.010 ↗
22. Approximation of the statistical characteristics of piecewise linear systems with asymmetric damping and stiffness under stationary random excitation10.3390/math10224275 ↗
23. Inherent non-linear damping in resonators with inertia amplification10.1063/5.0061826 ↗
24. Dynamic characteristics of a variable damping isolator with translating cam10.1155/2022/4738154 ↗
25. Two-step transfer function calculation method and asymmetrical piecewise-linear vibration isolator under gravity10.1177/1077546314557552 ↗
26. Vibration performance analysis of piecewise linear systems10.13465/j.cnki.jvs.2015.18.016 ↗
27. The transmissibility of vibration isolators with cubic nonlinear damping under both force and base excitations10.1016/j.jsv.2012.11.001 ↗
28. Analysis of vibration characteristics of power function damping system10.13465/j.cnki.jvs.2025.04.010 ↗
29. Suppressing resonant vibrations using nonlinear springs and dampers10.1177/1077546309102668 ↗
30. Modification and dynamic analysis of classical mathematical model for piecewise linear systems10.6052/0459-1879-23-295 ↗
31. A quad-stable nonlinear piezoelectric energy harvester with piecewise stiffness for broadband energy harvesting10.1007/s11071-024-10077-0 ↗