Design and analysis of nanocrystalline core for low-temperature-rise anode saturable reactor
Source abstract
Abstract
High-voltage direct current transmission relies critically on the anode saturable reactor (ASR) for thyristor protection. To address the reliability limitation caused by ASR temperature rise, this paper proposes a nanocrystalline core design. Through analysis of soft magnetic materials, nanocrystalline alloy is selected for its low loss and robust mechanical properties. A volt-second compensation principle is applied, increasing the core cross-sectional area by 1.38 times to maintain saturation time, while a 13-segment configuration enhances heat dissipation. Coupled field-circuit and multiphysics simulations confirm that the optimized ASR preserves key electrical characteristics including saturation time and current rise rate, while reducing total loss by 66.6% and average steady-state temperature by 29.9%. The design effectively resolves the thermal bottleneck, enabling high-reliability and low-temperature-rise operation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Magnetic Properties and Applications · HVDC Systems and Fault Protection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Power Grid Environmental Protection, School of Electrical Engineering and Automation, Wuhan University 1 , Wuhan 430072, Hubei Province,
School of Electrical Engineering and Automation, Wuhan University 2 , Wuhan 430072, Hubei Province,
Funding
National Natural Science Foundation of China
References (18)
Show source-provided references
1. Valve reactor for HVDC system: Electrical, thermal and vibrational properties10.1016/j.ijepes.2024.110149 ↗
2. Heat dissipation characteristics of anode saturable reactors with high thermal conductivity epoxy resin used for ultra-high-voltage direct current converter valves10.1049/hve.2019.0125 ↗
3. Core loss calculation of anode saturable reactor in damping oscillation state based on J-A theory10.1109/tasc.2021.3091111 ↗
4. Simulation analysis on magnetic core loss characteristic of valve reactor in UHVDC system10.1063/9.0000827 ↗
5. Magnetic-thermal coupling analysis of saturable reactor10.1109/tmag.2021.3083649 ↗
6. Modeling and calculation of core loss and heat distribution in ultra-thin wound core reactor based on electromagnetic and fluid-thermal coupling10.1109/tmag.2025.3552173 ↗
7. Design of anode saturable reactor core based on electromagnetic-thermal simulation and neural network modeling
8. Core loss calculation method considering leakage flux induced power loss for nanocrystalline core high-frequency transformer under load condition10.1109/tpel.2025.3566383 ↗
9. Research on vibration of the reactor for HVDC thyristor protection10.1016/j.egyr.2022.08.093 ↗
10. Study on electromagnetic vibration characteristics of anode saturable reactor considering anisotropic properties10.1109/tim.2025.3602530 ↗
11. Elastic properties of Cr-doped Mn ferrite10.1186/s42269-019-0143-5 ↗
12. Preparation of nanosized Mn-Zn ferrite and its application in TPV
13. Machine learning-based prediction of elastic properties of amorphous metal alloys10.1016/j.physa.2023.128678 ↗
14. Fracture toughness and cavitation erosion behavior of Fe-based amorphous composite coatings with Ni-coated Al2O3 addition10.1016/j.surfcoat.2024.131277 ↗
15. Simulation and experimental verification of vibration and noise characteristics of nanocrystalline high-frequency transformer10.1109/tpel.2025.3546063 ↗
16. Fracture toughness investigations of an ion-irradiated nanocrystalline TiZrNbHfTa refractory high-entropy alloy10.1002/adem.202400541 ↗
17. Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements modification10.1016/j.msea.2006.08.113 ↗
18. Temperature dependence of powder cores magnetic properties for medium-frequency applications10.1109/tmag.2021.3092013 ↗