Development and characterization of magnetite reinforced nanocomposites for electromagnetic responsiveness and smart material applications
Source abstract
Abstract
Nanocomposite materials have garnered significant attention in advanced materials science due to their unique ability to exhibit multifunctional properties, particularly in the realm of magnetism and electromagnetic responsiveness. This study focuses on the development and characterization of acrylonitrile butadiene styrene (ABS) polymer matrix reinforced with ferromagnetic iron oxide (Fe3O4) nanoparticles. The primary objective was to investigate the electromagnetic properties of the nanocomposite and evaluate its potential for use in smart materials, sensors, and actuators via 4D printing. The nanocomposite was fabricated using a melt-mixing process, wherein Fe3O4 nanoparticles were incorporated into the ABS thermoplastic matrix at varying concentrations ranging from 10 to 20 wt. %. The mixture was then extruded into long, continuous 3D printing filaments and then to rectangular plates to facilitate testing and analysis. Its response to electromagnetic radiation was characterized by magnetic pull test using a 12 V DC Arduino-controller. An analytical model was developed and is validated using experiments. Experimental tests showed that the material exhibited significant magnetic receptiveness, by pulling and displacing the samples when subjected to applied magnetic field. The results indicated that increasing the concentration of Fe3O4 nanoparticles enhanced the material’s sensitivity, highlighting its potential for applications requiring precise control over magnetic interactions. Further, external magnetic field strength and sample dimensions are also shown to be significant parameters. In conclusion, this research underscores the potential of Fe3O4-reinforced polymer nanocomposites as a versatile and innovative material system for electromagnetic sensitivity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Dielectric materials and actuators · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering, King Fahd University of Petroleum and Minerals 1 , Dhahran,
Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum and Minerals 2 , Dhahran,
References (32)
Show source-provided references
1. 4D printing thermo-magneto-responsive PETG-Fe3O4 nanocomposites with enhanced shape memory effects10.1016/j.apmt.2024.102361 ↗
2. A review of smart materials: Researches and applications10.31202/ecjse.562177 ↗
3. 3D and 4D printing: A review of virgin polymers used in fused deposition modeling10.1016/j.jcomc.2024.100472 ↗
4. Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface-treated nanoparticles10.1002/app.22849 ↗
5. Synthesis, characterisation and applications of iron oxide nanoparticles
6. Thermomechanical characterization of Nano-Fe3O4 reinforced thermoplastic adhesives and single lap-joints10.1016/j.compositesb.2019.107162 ↗
7. Electromagnetic induction heating of polymer nanocomposites—A computational study on design parameters10.1038/s41598-025-12964-x ↗
8. Thermo-mechanical degradation in ABS-Fe3O4 polymer nanocomposite due to repeated electromagnetic heating10.1016/j.compositesb.2020.108374 ↗
9. Guided wave monitoring of nano-Fe3O4 reinforced thermoplastic adhesive in manufacturing of reversible composite lap-joints using targeted electromagnetic heating10.1016/j.ndteint.2021.102481 ↗
10. Synthesis of rGO-Fe3O4 and La4BaCu5O13.10 and their polymer composites for electromagnetic interference shielding applications10.1016/j.diamond.2023.110219 ↗
11. Reconfigurable magnetic origami actuators with on-board sensing for guided assembly10.1002/adma.202008751 ↗
12. Multifunctional magnetic muscles for soft robotics10.1038/s41467-024-52347-w ↗
13. Magnetically controlled soft robotics utilizing elastomers and gels in actuation: A review10.1002/aisy.202000186 ↗
14. Experimental analysis the dynamic model of 3DOF robotic arm
15. Photothermally and magnetically controlled reconfiguration of polymer composites for soft robotics10.1126/sciadv.aaw2897 ↗
16. Strain dependent magneto-mechanical property of magnetorheological gel composite: Rheological measurement and model establishment10.1016/j.compscitech.2022.109612 ↗
17. 3D and 4D printing of PETG–ABS–Fe3O4 nanocomposites with supreme remotely driven magneto-thermal shape-memory performance10.3390/polym16101398 ↗
18. Modeling magnetic torque and force for controlled manipulation of soft-magnetic bodies10.1109/tro.2007.910775 ↗
19. Modeling and simulation of magnetic-shape-memory polymer composites10.1016/j.jmps.2006.12.008 ↗
20. Exploring routes to calculating the effective magnetic permeability of polymer magnetic composites10.1002/pc.70230 ↗
21. Comparison of nanocomposite dispersion and distribution for several melt mixers10.1016/j.polymer.2023.125735 ↗
22. Melt mixing as method to disperse carbon nanotubes into thermoplastic polymers10.1081/fst-200039267 ↗
23. Production of composite zinc oxide–polylactic acid radiopaque filaments for fused deposition modeling: First stage of a feasibility study10.3390/ma17122892 ↗
24. Magnetic properties of materials part 2. Types of magnetism (or −1 ≤ χ < inf)
25. Design, construction, and measurement of electromagnetic steering magnet for 25-MeV electron accelerator system10.1088/1742-6596/2431/1/012073 ↗
26. Plating on acrylonitrile–butadiene–styrene (ABS) plastic: A review10.1007/s10853-015-9668-7 ↗
27. ABS nano composite materials in additive manufacturing10.1088/1757-899X/455/1/012038 ↗
28. Synthesis and characterization of CuO-NiO-ZnO mixed metal oxide nanocomposite10.1016/j.jallcom.2017.06.288 ↗
29. Harnessing asymmetry to reprogram nonlinear metamaterials on-the-fly with no moving parts10.1016/j.matdes.2023.112168 ↗
30. 2023
31. 2012
32. Magnetic properties of nickel-plated carbon fiber composites and equivalent model for the magnetic permeability tensor10.1002/pc.70357 ↗