journal article·2026-02-01Open access

Influence of heat-treatment on structure and magnetic properties of 10 μ m-thick Fe-1,2,3 wt. %Si foils

Saijian Ajia, Takumi Takasu, Sho Muroga, Yasushi Endo

AIP Advances· Volume 16· Issue 2

Abstract

The influence of annealing temperature on the structure and magnetic properties of 10 μm-thick Fe-1, 2, and 3 wt. %Si foils was investigated. The coercivity of each foil decreased and its relative permeability increased as the annealing temperature increased, meaning the improvement of soft magnetic properties of these foils. The core loss of each foil at 100 kHz under a maximum magnetic flux density of 500 mT showed a decrease intendency with the increase of annealing temperature, owing to the suppression of the hysteresis loss by grain growth after annealing. Furthermore, from the loss separation of each foil, it was found that the eddy current loss slightly decreased and excess loss tend to increase with the increase of annealing temperature regardless of Si content. Therefore, these results suggest that an appropriate annealing temperature can improve the magnetic properties and core loss of ultra-thin Fe–Si foils, making them applicable as magnetic materials for next generation passive components in the frequency range up to several hundreds kHz.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of Engineering, Tohoku University 1 , Sendai, Miyagi 980-8579,

Center for Science and Innovation in Spintronics, Tohoku University 2 , Sendai, Miyagi 980-8579,

Funding

Japan Society for the Promotion of Science

References (17)

Show source-provided references
1. Magnetic materials and devices for the 21st century: Stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Modern soft magnets: Amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
3. T. Takamiya , K.Hanazawa, and T.Suzuki, “Recent development of grain-oriented electrical steels in JFE steel,” JFE Technical Report, 2016.
4. Soft magnetic material status and trends in electric machines10.1109/tie.2016.2613844 ↗
5. Review of Fe-6.5 wt. %Si high silicon steel—A promising soft magnetic material for sub-kHz application10.1016/j.jmmm.2019.02.089 ↗
6. Fabrication of Fe-6.5 wt. %Si ribbons by melt spinning method on large scale10.1155/2015/296197 ↗
7. Additive manufacturing of soft magnets for electrical machines—A review10.1016/j.mtphys.2020.100255 ↗
8. Core loss reduction in grain oriented silicon steel sheets by two-sided laser scribing in the presence of a magnetic field10.1016/j.jallcom.2021.162080 ↗
9. {411}⟨148⟩ texture in thin-gauge grain-oriented silicon steel10.1007/s40195-016-0419-9 ↗
10. Influence of thickness and chemical composition of hot-rolled bands on the final microstructure and magnetic properties of non-oriented electrical steel sheets subjected to two different decarburizing atmospheres10.3390/met7060229 ↗
11. Production of 2 μm-thick 6.5% Si-Fe cold rolled sheet10.1016/j.jmmm.2024.171840 ↗
12. Development of new measurement method for magnetostriction of magnetic amorphous alloy ribbon
13. 1993
14. Texture evolution during recrystallization and grain growth in heavily cold-rolled Fe-3%Si alloy10.2355/tetsutohagane.tetsu-2019-013 ↗
15. Calculation of the energy loss in magnetic sheet materials using a domain model10.1063/1.1723212 ↗
16. Method of evaluating anomalous eddy current loss in electrical steel sheets10.3379/msjmag.0901rg8053 ↗
17. General properties of power losses in soft ferromagnetic materials10.1109/20.43994 ↗