Simulation of the structural health monitoring in austenitic steels by determining magnetic mass on their surface
Source abstract
Abstract
The simulation of the structural health monitoring in austenitic steels by means of determining the topography of magnetic mass on their surface is illustrated in this paper. The austenitic steel has been simulated by a non-magnetic polymeric structure and the martensitic phase by amorphous magnetic ribbons, in different shapes. The magnetic field response obtained by a giant magneto-impedance sensor clearly represented the shape of the magnetic material at distances in the order of 1.5 mm with a simple scanning, indicating the ability of the sensor to determine the martensitic phase on the surface of the austenitic steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Electronic Sensors, National Technical University of Athens, Zografou Campus 1 , Athens 15780,
Pushkov Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation, IZMIRAN 2 , 108840, Kaluzhskoe sh. 4, Troitsk, Moscow,
National Key Laboratory of Spintronics, Hangzhou International Innovation Institute, Beihang University 3 , Hangzhou 311115,
References (15)
Show source-provided references
1. Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel: Influence of temperature and carbon content10.1016/j.msea.2006.12.211 ↗
2. Monitoring fatigue degradation in austenitic stainless steels10.1111/j.1460-2695.2004.00784.x ↗
3. Eddy-current control of the phase composition and hardness of metastable austenitic steel after different regimes of nanostructuring frictional treatment10.1134/s1061830916110048 ↗
4. Electromagnetic NDT for lifetime management by monitoring of ageingphenomena
5. Estimating fatigue damage of austenitic steel by combining the ultrasonic with Eddy current monitoring10.1007/s10921-018-0541-x ↗
6. Non-destructive in situ monitoring of the microstructural development in high performance steel components during heat treatment
7. Thermoelastic phase analysis (TPA): A new method for fatigue behaviour analysis of steels10.1111/ffe.12511 ↗
8. Evaluation of the strain-induced martensitic transformation by acoustic emission monitoring in 304L austenitic stainless steel: Identification of the AE signature of the martensitic transformation and power-law statistics10.1016/j.msea.2008.04.068 ↗
9. Revisiting the universality law in magnetically detected residual stresses in steels10.1063/9.0000766 ↗
10. P. Vourna , Ph.D. thesis, National Technical University of Athens, 2013.
11. Development of a GMI sensor for evaluating microstructural degradation in ferromagnetic materials
12. Highly sensitive magnetometer based on the off-diagonal GMI effect in co-rich glass-coated microwire10.1002/pssa.201300717 ↗
13. Interaction of an eddy-current coil with a right-angled conductive wedge10.1109/tmag.2009.2036724 ↗
14. Magnetostrictive delay lines: Engineering theory and sensing applications10.1088/0957-0233/14/2/201 ↗
15. Sensor to monitor localized stresses on steel surfaces using the magnetostrictive delay line technique10.3390/s19214797 ↗