Synthesis and density optimization of fluorite-structured Dy2TiO5 neutron-absorbing powder via a melting–crushing–grading route
Source abstract
Abstract
Fluorite-structured Dy2TiO5 is an attractive neutron absorber commonly used in bulk form for control rods due to its superior irradiation tolerance and low swelling behavior. However, conventional routes have many disadvantages, such as low purity and low efficiency. In this study, a stabilizer-free process was developed to produce high-purity fluorite Dy2TiO5 powder via ball milling, sintering, melting, rapid quenching, and crushing. During ball milling, Dy2O3 and TiO2 are gradually amorphized as grain size decreases, and no new compounds form regardless of milling parameters. Orthorhombic Dy2TiO5, Dy2Ti2O7, hexagonal Dy2TiO5 and Dy2O3, and low-valent TinO2n-1 are formed depending on the sintering temperatures. After a brief melt at 1900 °C followed by rapid quenching, the hexagonal Dy2TiO5 fully transforms to the high-purity fluorite Dy2TiO5, which is preserved during crushing, with a true density of ∼7.18 to 7.19 g/cm3. Finally, the apparent and tap densities are optimized through particle-size grading and proportioning. The density–fraction relationship is better fitted by a quadratic Scheffé mixture model, consistent with hierarchical void filling, and a predictive formula is proposed. With optimized grading, the powders achieve tap densities of 5.09–5.11 g/cm3 and a porosity of ∼0.288, approaching the practical packing limit.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear materials and radiation effects · Fusion materials and technologies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China National Nuclear Corporation Jianzhong Nuclear Fuel Co. Ltd 1 , Yibin 644000,
College of Energy, Xiamen University 2 , Xiamen 361102,
Fujian Provincial Nuclear Energy Engineering Technology Research Center 3 , Xiamen 361102,
Guangdong Provincial Key Laboratory of Extreme Conditions 4 , DongGuan 523803,
Funding
Guangdong Provincial Key Laboratory of Extreme Condition
References (41)
Show source-provided references
1. Materials challenges for nuclear systems10.1016/s1369-7021(10)70220-0 ↗
2. Development of dysprosium titanate based ceramics10.1111/j.1551-2916.2005.00211.x ↗
3. Thermophysical measurements on dysprosium and gadolinium titanates10.1016/j.jnucmat.2004.02.009 ↗
4. Dysprosium titanate as an absorber material for control rods10.1016/s0022-3115(00)00129-x ↗
5. Structures of two high-temperature Dy2TiO5 modifications10.1134/s0036023606100196 ↗
6. Relationship between the orthorhombic and hexagonal phases in Dy2TiO510.1111/jace.14354 ↗
7. A2TiO5 (A = Dy, Gd, Er, Yb) at high pressure10.1021/acs.inorgchem.7b03106 ↗
8. 2014 · 2014
9. The influence of crystal structure on ion-irradiation tolerance in the Sm(x)Yb(2-x)TiO5 series10.1016/j.jnucmat.2015.12.036 ↗
10. Neutron adsorption performance of Dy2TiO5 materials obtained from powders synthesized by the molten salt method10.1016/j.ceramint.2016.10.163 ↗
11. Cubic phases in the Gd2O3-ZrO2 and Dy2O3-TiO2 systems for nuclear industry applications10.1155/2015/298690 ↗
12. Light He and heavy Kr ions irradiation effects in orthorhombic Tb2TiO5 ceramics10.1016/j.nimb.2019.01.001 ↗
13. Synthesis and ion-irradiation tolerance of the Dy2TiO5 polymorphs10.1016/j.actamat.2020.116518 ↗
14. Mechanical and thermal expansion properties of Dy2TiO5 ceramic neutron absorbers with small grains10.1016/j.ceramint.2023.03.143 ↗
15. Investigation of the thermophysical properties of oxide ceramic materials at liquid-helium temperatures10.1134/s1063776108090185 ↗
16. Hafnium and dysprosium titanate based control rods for thermal water-cooled reactors10.1007/bf02408175 ↗
17. Synthesis and sintering studies on Dy2TiO5 prepared by polymer carrier chemical process10.1016/j.jnucmat.2006.03.013 ↗
18. Microstructural evolution of Dy2O3-TiO2 powder mixtures during ball milling and post-milled annealing10.3390/ma10010019 ↗
19. Microstructure and physical properties of Tb2TiO5 neutron absorber synthesized by ball milling and sintering10.1007/s11665-016-2261-7 ↗
20. Preparation of nanostructured dysprosium titanate and study of its properties10.30791/0015-3214-2020-4-5-9 ↗
21. Hot pressing of dysprosium hafnate and titanate pellets10.1007/s11106-012-9379-4 ↗
22. Study of the mechanical properties of dysprosium-titanate and dysprosium-hafnate nanopowders10.1007/s11015-024-01695-5 ↗
23. Probing of structural, electrical, and dielectric properties of samarium doped composite of barium titanate (Ba0.5Sm0.5TiO3) and cobalt ferrite (Co0.5Sm0.5Fe2O4)10.1088/1361-648x/ad199e ↗
24. Effect of MoO3 and TiO2 powder particle sizes on the phase composition and density of dysprosium titanate pellets10.1007/s11106-023-00390-5 ↗
25. Microstructure and its effect on mechanical and thermal properties of Al-based Gd2O3 MMCs used as shielding materials in spent fuel storage10.1016/j.ceramint.2020.02.068 ↗
26. A molecular simulation study on the sintering mechanism of TiO210.1111/jace.19087 ↗
27. Designing particle sizing and packing for flowability and sintered mechanical strength10.1016/j.jeurceramsoc.2009.12.017 ↗
28. Structure and mechanical properties of in-situ synthesized α-Ti/TiO2/TiC hybrid composites through mechanical milling and spark plasma sintering10.1016/j.ceramint.2021.12.342 ↗
29. In-situ oxygen extraction from TiO2 using laser thermal vacuum metallurgy10.1016/j.vacuum.2023.112628 ↗
30. Vacuum sintering-induced oxygen vacancies and their role in the densification of TiO2 ceramics: Experiment and simulation10.1111/jace.20628 ↗
31. The relationship between oxygen vacancies, the anatase-to-rutile phase transition, and sintering behavior of TiO210.1016/j.jallcom.2025.183313 ↗
32. Machining pre-sintered compacts of a sinter-hardenable powder metallurgy steel: A novel methodology for selecting sintering temperatures for the optimum machinability10.1016/j.jmapro.2023.09.050 ↗
33. Densification during the supersolidus liquid-phase sintering of nickel-based prealloyed powder mixtures10.1007/s11661-999-0032-x ↗
34. Hydrogen-assisted dual-stage sintering: Achieving concurrent densification and damping enhancement in TiNb alloys10.1016/j.jmrt.2025.06.182 ↗
35. Quantitative phase analysis from neutron powder diffraction data using the Rietveld method10.1107/s0021889887086199 ↗
36. Influence of particle size distribution on the powder bed quality in the powder bed fusion additive manufacturing process10.1016/j.jmrt.2025.06.136 ↗
37. Slip casting of alumina powder mixtures with bimodal size distribution. Influence of particle size difference between fine and coarse powders on packing and consolidation process10.2109/jcersj.108.1255_254 ↗
38. Importance of particle size and shape on the tensile strength distribution and de-agglomeration of cohesive powders10.1016/j.powtec.2013.08.034 ↗
39. The effect of particle size dispersity in dense granular packings on the void structure and the interparticle contact frictional state10.1063/1.3180050 ↗
40. Inter-laboratory study of particle size distribution measurements by laser diffraction10.1002/ppsc.201000026 ↗
41. Measuring particle size distribution using laser diffraction10.1097/ss.0b013e3181c2a928 ↗