Study on the stability of emulsified paraffin with different preservatives
Source abstract
Abstract
The mildew and odor of emulsified paraffin seriously limit its industrial applications. To solve this problem, this work investigated sodium diacetate, sodium benzoate, potassium sorbate, and butylparaben as preservatives on the stability of emulsified paraffin. The results found that the optimal emulsification temperature is 75 °C, the viscosity of the paraffin emulsion is 13.75 s, the solid content is 39.4%, the dispersion is first-class, and the centrifugal and standing stabilities are good. The four preservatives had no significant effect on the stability and dispersion of emulsified paraffin wax and had a limited effect on centrifugal stability. The emulsified paraffin with 1.5% sodium diacetate has good liquidity, and the solid content fluctuation is less than 1.5%. Sodium benzoate and potassium sorbate have a stronger ability to prevent mold than sodium diacetate and butylparaben. After adding 0.15% sodium diacetate, the Zeta potential was as high as −38.53 mV. The preservative sodium diacetate does not change the non-Newtonian fluid rheological properties of the emulsified paraffin, and the emulsion has good shear resistance. This study provides theoretical and technical support for the stable application of emulsified paraffin.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Petroleum Processing and Analysis · Polymer composites and self-healing · Surfactants and Colloidal Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemistry and Environmental Engineering, Anyang Institute of Technology , Anyang 455000,
Funding
Key Laboratory of Anyang Institute of Technology
References (29)
Show source-provided references
1. Theoretical and experimental determinations of the hydrophilic–lipophilic balance (HLB) of representative oils and lecithins10.3390/colloids8020021 ↗
2. Experimental study of the heat transfer characteristics of a paraffin-in-water emulsion used as a secondary refrigerant10.1016/j.ijrefrig.2017.11.029 ↗
3. Photo-thermal performance evaluation on MWCNTs-dispersed microencapsulated PCM slurries for direct absorption solar collectors10.1016/j.est.2019.100793 ↗
4. Assessment of the safety of the feed additives acetic acid, calcium acetate and sodium diacetate for fish (FEFANA asbl)10.2903/j.efsa.2023.8176 ↗
5. Thermal modification of Southern pine combined with wax emulsion preimpregnation: Effect on hydrophobicity and dimensional stability10.1515/hf-2014-0106 ↗
6. Aggregation of cetyltrimethylammonium bromide with hydrolyzed polyacrylamide at the paraffin oil/water interface: Interfacial rheological behavior study10.1016/j.colsurfa.2007.10.033 ↗
7. Interfacial rheology of Span 80 adsorbed layers at paraffin oil–water interface and correlation with the corresponding emulsion properties10.1016/j.colsurfa.2006.11.041 ↗
8. Pickering emulsions stabilized by paraffin wax and Laponite clay particles10.1016/j.jcis.2009.03.080 ↗
9. Forming textured hydrophobic surface coatings via mixed wax emulsion impregnation and drying of poplar wood10.1007/s00226-020-01156-7 ↗
10. Resistance to fungal decay of paraffin wax emulsion/copper azole compound system treated wood10.1016/j.ibiod.2018.01.005 ↗
11. Use of wax emulsions for improvement of wood durability and sorption properties10.1007/s00107-010-0425-y ↗
12. Acetylation of wood in combination with polysiloxanes to improve water-related and mechanical properties of wood10.1007/s00226-013-0535-x ↗
13. Isolation of an antimicrobial compound from Impatiens balsamina L. using bioassay-guided fractionation10.1002/ptr.906 ↗
14. The application of potassium sorbate, sodium benzoate, and sodium diacetate in preventing fungal contamination in red thread green leaf tissue culture
15. Inhibitory effects of four fungicides and their mixtures on Aspergillus flavus
16. Study on inhibition of five kinds of foods additives on bacteria and fungi
17. Safety assessment of sodium acetate, sodium diacetate and potassium sorbate food additives10.1016/j.foodchem.2018.03.020 ↗
18. Inhibition of Listeria monocytogenes by sodium diacetate and sodium lactate on wieners and cooked bratwurst10.4315/0362-028x-65.1.116 ↗
19. Bacterial toxicity testing and antibacterial activity of parabens10.1080/02772248.2017.1300905 ↗
20. Grafting of laccase-catalysed oxidation of butyl paraben and p-coumaric acid onto chitosan to improve its antioxidant and antibacterial activities10.1016/j.reactfunctpolym.2020.104511 ↗
21. Effects of potassium sorbate on systemic inflammation and gut microbiota in normal mice: A comparison of continuous intake and washout period10.1016/j.fct.2024.114443 ↗
22. Antimicrobial effects of sodium benzoate, sodium nitrite and potassium sorbate and their synergistic action in vitro
23. Saturated monoglyceride effects on low-temperature performance of biodiesel blends10.1016/j.fuproc.2013.10.002 ↗
24. Comparing the crystallization and polymorphic behaviour of saturated and unsaturated monoglycerides10.1016/j.foodres.2009.07.006 ↗
25. Electroflocculation: The effect of zeta-potential on particle size10.1016/j.desal.2006.03.533 ↗
26. Experimental methods in chemical engineering: Zeta potential10.1002/cjce.23914 ↗
27. Natural and engineered nano and colloidal transport: Role of zeta potential in prediction of particle deposition10.1021/la900134f ↗
28. Ultrasound assisted manufacturing of paraffin wax nanoemulsions: Process optimization10.1016/j.ultsonch.2014.10.024 ↗
29. Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications10.1016/j.energy.2009.03.016 ↗