Experimental investigation on the dynamic deformation behavior of various rocks using the electromagnetic loading split Hopkinson bar
Source abstract
Abstract
Understanding rocks’ dynamic deformation characteristics is crucial for clarifying impact failure and stress wave propagation mechanisms under high-speed loading, with significant theoretical value for rock mechanics and practical implications for mining, tunnel construction, and geohazard prevention. This study used a novel electromagnetic-loading split Hopkinson bar to perform dynamic tests on ten rock samples, investigating mechanical responses of different rock types under varying loads. This innovative technology addresses poor repeatability and low accuracy of traditional compressed air systems, providing a more reliable platform for rock dynamic research. Results show a significant correlation between unconfined compressive strength and elastic modulus, with high-strength rocks having higher moduli. Dynamic compressive strength differs from quasi-static results, shown by the nonlinear relationship between dynamic strength and elastic modulus. Rock strain behavior under dynamic loading is influenced by composition, microstructure, and loading rate, with distinct responses across rock types and strain rates. A complex strength–strain rate relationship exists: higher loads enable higher dynamic stresses, but not all samples show increased strain rates. This research deepens our understanding of rock dynamic behaviors, verifies electromagnetic loading feasibility and superiority in rock testing, and provides key support for optimizing engineering design, enhancing disaster control, and advancing rock mechanics and dynamic testing disciplines.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China Construction Tunnel Corp., Ltd. 1 , Chongqing 401320,
2 China Construction Fifth Engineering Bureau, Chongqing 410004, China
3 School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China
Chongqing City Investment Infrastructure Construction Co., Ltd. 4 , Chongqing 400010,
Funding
National Natural Science Foundation of China · Science and Technology Research Program of Chongqing Municipal Education Commission · Natural Science Foundation of Chongqing Municipality
References (29)
Show source-provided references
1. Study on the efficiency of energy transfer in the blasting with different coupling mediums for deep rock mass excavation10.1016/j.engfracmech.2025.111048 ↗
2. Influence of complicated faults on the differentiation and accumulation of in-situ stress in deep rock mass10.1007/s12613-022-2528-y ↗
3. Research progress of the fundamental theory and technology of rock blasting10.1007/s12613-022-2464-x ↗
4. A comprehensive underground excavation design (CUED) methodology for geotechnical engineering design of deep underground mining and tunneling10.1016/j.ijrmms.2021.104684 ↗
5. Numerical study on blast-induced fragmentation in deep rock mass10.1016/j.ijimpeng.2022.104367 ↗
6. Deep rock blasting using decoupled charge with different coupling mediums10.1061/ijgnai.gmeng-8179 ↗
7. Effect of confining pressure on damage accumulation of rock under repeated blast loading10.1016/j.ijimpeng.2021.103961 ↗
8. Experimental and numerical investigation on the peak value and loading rate of borehole wall pressure in decoupled charge blasting10.1016/j.ijrmms.2023.105535 ↗
9. Effects of loading rate on rock fracture: Fracture characteristics and energy partitioning10.1016/S1365-1609(00)00008-3 ↗
10. Grain-based modelling of dynamic shear rupture of heterogeneous rock using a coupled continuum-discrete model10.1016/j.ijimpeng.2022.104420 ↗
11. Fault damage zones10.1016/j.jsg.2003.08.002 ↗
12. Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testing10.1016/j.engfracmech.2009.02.001 ↗
13. On the anisotropy of shear fracture toughness in rocks10.1016/j.tafmec.2021.102946 ↗
14. Dynamic mode II fracture toughness of rocks subjected to various in situ stress conditions10.1007/s00603-022-03178-y ↗
15. The mechanical response of commercially pure copper under multiaxial loading at low and high strain rates10.1016/j.ijmecsci.2022.107340 ↗
16. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
17. Hopkinson bar experimental technique: A critical review10.1115/1.1704626 ↗
18. Hopkinson bar loaded fracture experimental technique: A critical review of dynamic fracture toughness tests10.1115/1.3124647 ↗
19. Effects of radial inertia and end friction in specimen geometry in split Hopkinson pressure bar tests: A computational study10.1016/j.mechmat.2012.04.007 ↗
20. Development of the split-Hopkinson pressure bar and its application in testing the dynamic mechanical properties of quasi-brittle materials: A review10.1016/j.jmrt.2024.11.244 ↗
21. Achieving combined tension-torsion split Hopkinson bar test based on electromagnetic loading10.1016/j.ijimpeng.2022.104287 ↗
22. The achievement of constant strain rates in electromagnetic Hopkinson bar test10.1016/j.ijimpeng.2024.105121 ↗
23. Fracture of brittle solids under impact: The decisive role of stress waves10.1016/j.ijimpeng.2021.104104 ↗
24. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determining deformability of rock materials in uniaxial compression10.1016/0148-9062(79)91451-7 ↗
25. ISRM suggested methods for rock stress estimation—Part 1: Strategy for rock stress estimation10.1016/j.ijrmms.2003.07.011 ↗
26. A review of dynamic experimental techniques and mechanical behaviour of rock materials10.1007/s00603-013-0463-y ↗
27. Dynamic behavior of a mediterranean natural stone under tensile loading10.1016/j.ijrmms.2008.09.010 ↗
28. A dynamic punch method to quantify the dynamic shear strength of brittle solids10.1063/1.3585983 ↗
29. Establishment of a dynamic Mohr–Coulomb failure criterion for rocks10.1515/ijnsns-2011-0120 ↗