journal article·2025-01-01Open access

Flow characteristics in heated trapezoidal channels: A finite element method study of Reynolds number and fin design influences

Mohammed Riad Benouaz, Houssameddine Kandouci, Mohammed Ayad Alkhafaji, Noureddine Kaid, Alain M. Dikandé, Younes Menni, Giulio Lorenzini, Ali J. Chamkha

AIP Advances· Volume 15· Issue 1

Abstract

This work investigates the effect of a number of perforated fin configurations on the convective flow characteristics within a heated trapezoidal channel. By improving the flow characteristics, pressure distribution, velocity profiles, and temperature patterns, it is intended to investigate optimum performance by using different geometrical fin designs. Numerical simulations are performed for solid and perforated fins with Reynolds numbers from 100 000 up to 200 000. Most importantly, the results highlight that perforations cause significant changes in flow behavior, such as the formation of distinct recirculation zones and dynamic pressure profile variations, which influence the thermal characteristics. This study identifies that optimization of perforated fin geometries is a key strategy to achieve high efficiency in thermal management systems for effective cooling of engineering applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer Mechanisms · Fluid Dynamics and Turbulent Flows · Heat Transfer and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Energy and Environment Laboratory, Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. University Naama) 1 , P.O. Box 66, Naama 45000,

College of Technical Engineering, National University of Science and Technology 2 , Dhi Qar 64001,

Laboratory of Research on Advanced Materials and Nonlinear Science (LaRAMaNS), Department of Physics, Faculty of Science, University of Buea 3 , P.O. Box 63, Buea,

Department of Engineering and Architecture 4 , Parco Area delle Scienze 181/A, Parma 43124,

Faculty of Engineering, Kuwait College of Science and Technology 5 , Doha District, Kuwait 35004,

References (40)

Show source-provided references
1. Multi-objective optimisation of a 2D backward-sfacing step channel with porous baffles10.1007/s10973-024-13023-9 ↗
2. Heat transfer analysis of pulsating nanofluid flow in a semicircular wavy channel with baffles10.1007/s12046-023-02119-x ↗
3. Enhanced heat transfer performance in channel with delta-wing perforated V-type baffles10.1007/s10973-023-12452-2 ↗
4. Optimizing thermal performance of a premixed hydrogen/air fueled micro-combustor with baffles10.1007/s11771-023-5505-3 ↗
5. Experimental study on drag characteristics of sill and baffles in forced unsubmerged and submerged hydraulic jumps10.1007/s12046-023-02383-x ↗
6. Thermo-flow behavior of air-channel heat exchanger with nonidentical baffle lengths: Computational analysis10.1007/s10973-024-12906-1 ↗
7. Numerical study of turbulent airflow structure and transfer of heat having trapezoidal baffles attached on the walls and centerline of the rectangular channel10.1007/s40819-022-01252-1 ↗
8. Multigrid simulations of non-Newtonian fluid flow and heat transfer in a ventilated square cavity with mixed convection and baffles10.1038/s41598-024-57322-5 ↗
9. Study on the net power density improvement of staggered trapezoidal baffle flow channel for PEMFC10.1007/s11581-023-05198-2 ↗
10. Experimental study and neural network-based prediction of thermal performance of applying baffles and nanofluid in the double-pipe heat exchangers10.1007/s10973-024-12969-0 ↗
11. Experimental study on debris-flow velocity control mechanism with baffles in a drainage channel10.1007/s10064-020-02086-1 ↗
12. Effect of louver baffles installation on hydrodynamics of bubbling fluidization in biomass gasifier10.1038/s41598-022-19120-9 ↗
13. Inclination angles effect on heat transfer and turbulent periodic flow in a duct-mounted flow-inclined baffles10.1007/s13369-023-07903-9 ↗
14. Three-dimensional numerical analysis of the impact of the orientation of partially inclined baffles on the combined mass and heat transfer by a turbulent convective airflow10.1007/s40095-022-00505-5 ↗
15. Numerical investigation of the impact of inclined baffles and an elastic vibrating beam on the thermo-fluid behavior in a rectangular channel10.1007/s42452-021-04568-7 ↗
16. Effect of baffle pattern applied to cathode parallel channel on PEMFC performance10.1007/s40684-023-00534-3 ↗
17. Heat transfer enhancement using rectangular and triangular shaped baffles with and without nanofluid: New insight into optimization of flow geometric parameters10.1134/S2070205122030091 ↗
18. Optimal array layout of cylindrical baffles to reduce energy of rock avalanche10.1007/s11629-021-6916-y ↗
19. Effect of graphene nanopaint on performance of solar air heater attached with inclined and winglet baffles10.1007/s11356-023-28646-y ↗
20. Thermodynamics and heat transfer study of a circular tube embedded with novel perforated angular-cut alternate segmental baffles10.1007/s10973-021-10718-1 ↗
21. Segmental baffles as a means of improving the heat transfer efficiency of air coolers10.1007/s10556-021-00902-3 ↗
22. Experimental analysis and exergetic assessment of the solar air collector with delta winglet vortex generators and baffles10.1007/s10973-020-10298-6 ↗
23. Structural mechanics of flexible baffle used in enhancing heat transfer of power law fluids in channel-trapezoidal cavity10.1007/s40799-022-00554-9 ↗
24. Numerical analysis of a heat exchanger with curved segmental baffle and Cassini oval cross-section tubes in various bundle arrangements10.1007/s10973-023-12062-y ↗
25. Heat transfer and thermal–hydraulic evaluations of cross-circular grooved rectangular flow ducts depending on rectangular baffle design parameters10.1140/epjp/s13360-024-05003-7 ↗
26. Performance analysis and structural optimization of torsional flow heat exchangers with sinusoidal corrugated baffle10.1007/s11630-023-1773-3 ↗
27. Effect of shape and placement of twisted pin fins in a rectangular channel on thermo-hydraulic performance10.1007/s11630-024-2030-0 ↗
28. Numerical investigation of the double diffusive convection in 3D trapezoidal solar still equipped with conductive fins10.3390/math10122115 ↗
29. Finite element method-based investigation of heat exchanger hydrodynamics: Effects of triangular vortex generator shape and size on flow characteristics10.1063/5.0222106 ↗
30. Three-dimensional assessment of convective heat transfer in perforated cubic obstacles arranged in a staggered pattern under laminar flows10.1063/5.0223015 ↗
31. Enhancement of the cooling of shear-thinning fluids in channel heat exchangers by using the V-baffling technique10.1016/j.tsep.2020.100534 ↗
32. Design and performance evaluation of air solar channels with diverse baffle structures10.1615/ComputThermalScien.2018025026 ↗
33. 3D numerical study and comparison of thermal-flow performance of various annular finned-tube designs10.1016/j.joes.2022.02.009 ↗
34. CFD-Based simulation and analysis of hydrothermal aspects in solar channel heat exchangers with various designed vortex generators10.32604/cmes.2021.012839 ↗
35. Details on the hydrothermal characteristics within a solar-channel heat-exchanger provided with staggered t-shaped baffles10.3390/en14206698 ↗
36. The numerical computation of turbulent flows10.1016/0045-7825(74)90029-2 ↗
37. Numeric and experimental analysis of the turbulent flow through a channel with baffle plates10.1590/S1678-58782004000200006 ↗
38. Effects of two-equation turbulence models on the convective instability in finned channel heat exchangers10.1016/j.csite.2022.101824 ↗
39. Calculation of turbulent flow and heat transfer in a porous-baffled channel10.1016/S0017-9310(02)00360-5 ↗
40. Heat transfer augmentation in a heat exchanger tube using a baffle10.1016/j.ijheatfluidflow.2006.03.020 ↗