journal article·2024-12-01Open access

Analysis and experiment of conductive rod of high voltage casing considering creep condition

Xiu Zhou, Tian Tian, Liang Li, Jin Bai, Yan Luo, Kui Ma, Heng Zhang, Kaiji Jiang, Dezhi Chen

AIP Advances· Volume 14· Issue 12

Abstract

Transformer bushings are used in large quantities in substations, and their operational reliability directly affects the operational safety of equipment and the power grid. The conductor rod is a crucial component of a high-voltage (HV) casing, and any breakage can trigger line protection actions and lead to significant economic losses. Since the conductive rod is subjected to the tension exerted by the compression spring for a long time and the influence of other external tensions, it is in a state of slow creep, and thus the conductive rod gradually fails. Therefore, this paper investigates the stress and deformation of the conductor rod in a 750 kV HV casing under service conditions that take creep characteristics into account. First, a finite element model of the rod connector considering creep characteristics is established. Second, stress and deformation experiments of the sample are carried out, considering the effect of creep characteristics. Finally, the experimental results are compared with the simulation results to verify the accuracy of the simulation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Grid Ningxia Electric Power Co., Ltd., Electric Power Research Institute 1 , Ningxia 750002,

State Grid Ningxia Electric Power Co., Ltd. 2 , Ningxia 750001,

Shenyang University of Technology 3 , Shenyang, Liaoning 110870,

Funding

State Grid Ningxia Electric Power Co., Ltd.

References (13)

Show source-provided references
1. On-line monitoring and diagnoses of power transformer bushings10.1109/tdei.2006.1657975 ↗
2. 2022
3. Transformer bushing damage accident analysis. Institute of management science and industrial engineering
4. S. Ersoy , “Seismic response of transformer bushing systems and their rehabilitation using frictional pendulum system,” Dissertation Thesis (New Jersey Institute of Technology, 2002).
5. Condition assessment of power transformer bushing using SFRA and DGA as auxiliary tools
6. Creep and tensile behavior of austenitic Fe–Cr–Ni stainless steels10.1016/j.msea.2008.04.098 ↗
7. Creep deformation and damage evaluation of service exposed reformer tube10.1179/1879139514y.0000000175 ↗
8. Asymptotic creep deformation behavior of modified HP steel after long-term service10.1007/s12206-020-0421-z ↗
9. A composite model for residual creep life assessment in T/P92 heat-resistant steel10.1016/j.ijpvp.2021.104352 ↗
10. Creep damage evaluation via uniaxial miniature testing for multiaxially stressed Mod.9Cr–1Mo steel components10.1016/j.ijpvp.2021.104518 ↗
11. On the microstructural origin of premature failure of creep strength enhanced martensitic steels10.1016/j.jmst.2021.03.001 ↗
12. IEC 60317-0-9:2015 · 2015
13. IEC 60317-74:2018 · 2018