Research on speed fluctuation suppression of PMSM based on SADRC and QRC cascade control
Source abstract
Abstract
The objective of this research is to reduce the speed fluctuation of Permanent Magnet Synchronous Motor (PMSM) due to periodic torque fluctuation. To achieve this, the authors designed a cascade control system based on Linear/Nonlinear Switching Active Disturbance Rejection Control (SADRC) and Quasi Resonant Controller (QRC). Periodic torque pulsations, mainly the first, second, and fourth harmonics, are analyzed first. The architecture of the SADRC and QRC cascade control systems is then established. Subsequently, the parameters of SADRC and QRC are calibrated by the bandwidth method, and a closed-loop system model of cascade control is developed. Ultimately, periodic load fluctuations with step load fluctuations are applied at the load side to ascertain the efficacy of the SADRC and QRC cascade control systems. The SADRC and QRC cascade control reduce the first, second, and fourth harmonics of speed fluctuations by 74%, 33%, and 47.5%, respectively, through the use of QRC current compensation in the presence of peak 2 N m periodic torque fluctuations. The SADRC and QRC cascade control systems demonstrate excellent performance in the context of cyclic and step load fluctuations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Sensorless Control of Electric Motors · Advanced Control Systems Design · Advanced Algorithms and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Electrical Engineering College, North University of China 1 , Taiyuan 030051, Shanxi,
Research and Production Division, Institute of Spacecraft System Engineering 2 , Beijing 100086,
Funding
Science and Technology on Transient Impact Laboratory
References (22)
Show source-provided references
1. Robust position anti-interference control for PMSM servo system with uncertain disturbance10.30941/CESTEMS.2020.00020 ↗
2. Flux-weakening controller design of dual three-phase PMSM drive system with copper loss minimization10.1109/TPEL.2022.3216513 ↗
3. Robust predictive torque control of N*3-Phase PMSM for high-power traction application10.1109/TPEL.2020.2981914 ↗
4. Digital implementation of an adaptive speed regulator for a PMSM10.1109/TPEL.2010.2055890 ↗
5. An improved deadbeat predictive current control of PMSM drives based on the ultra-local model10.23919/CJEE.2023.000020 ↗
6. Field-oriented control and direct torque control for paralleled VSIs fed PMSM drives with variable switching frequencies10.1109/TPEL.2015.2437893 ↗
7. A robust predictive current controller for PMSM drives10.1109/TIE.2016.2521338 ↗
8. GPIO based super-twisting sliding mode control for PMSM10.1109/TCSII.2020.3008188 ↗
9. Position sensorless control of interleaved CSI fed PMSM drive with extended Kalman filter10.1109/TMAG.2012.2197180 ↗
10. Multi-physics and multi-objective optimization of a high speed PMSM for high performance applications10.1109/TMAG.2018.2835504 ↗
11. An online compensation method of VSI nonlinearity for dual three-phase PMSM drives using current injection10.1109/TPEL.2021.3127990 ↗
12. ADP-based optimal control for systems with mismatched disturbances: A PMSM application10.1109/TCSII.2022.3233356 ↗
13. A polar-coordinate-multisignal-flux-observer-based PMSM non-PLL sensorless control10.1109/TPEL.2023.3289095 ↗
14. Laboratory implementation of direct torque controller based speed loop pseudo derivative feedforward controller for PMSM drive10.30941/CESTEMS.2024.00004 ↗
15. Model predictive control for open winding PMSM with variable dead-zone time
16. A stator current vector orientation based multi-objective integrative suppressions of flexible load vibration and torque ripple for PMSM considering electrical loss10.30941/CESTEMS.2020.00021 ↗
17. Investigation of performance parameters of PMSM drives using DTC-SVPWM technique
18. Speed and position estimation technique for PMSM based on modified machine model
19. A Sliding Mode Observer for PMSM speed and rotor position considering saliency
20. 2023
21. An extended-state-observer-based sliding-mode speed control for permanent-magnet synchronous motors10.1109/jestpe.2020.2990442 ↗
22. Effects of discretization methods on the performance of resonant controllers10.1109/tpel.2010.2041256 ↗