Bridgeless modified Cuk–SEPIC power factor correction converter for E-bicycle applications
Source abstract
Abstract
The focus of this scope is on the single phase Cuk and SEPIC power factor correction converter that is attractive to electric bicycle applications. In order to guarantee improved performance, the proposed modified converter is designed to operate in discontinuous conduction mode, which is hidden by changes in supply and load voltage. For rated load, the investigational study achieves reduced input line total harmonic distortion and unity power factor. Line regulation, high efficiency, and load regulation are achieved by means of a closed loop PI control circuit that has a voltage sensor and current loop. The power supply is simulated using MATLAB/Simulink under various operating conditions, and the designed system is validated using a 250 W hardware prototype. The input current is observed to be perfectly sinusoidal, and the IEC 61000-3-2 class A standard is followed in recording the total harmonic distortion of the mains current.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced DC-DC Converters · Multilevel Inverters and Converters · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Kalasalingam University 1 , Srivilliputhur, Tamil Nadu, India
Department of Mechatronics Engineering, Thiagarajar College of Engineering 2 , Madurai, Tamil Nadu, India
Department of Mechanical Engineering, Yeshwantrao Chavan College of Engineering 3 , Nagpur, India
4 Division of Research and Development, Lovely Professional University, Phagwara, India
Saveetha School of Engineering, SIMATS 5 , Chennai, Tamil Nadu 602105, India
Department of Chemistry, College of Science, King Saud University 6 , Riyadh 11451, Saudi Arabia
Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering and Technology, Marwadi University 7 , Rajkot, Gujarat 360003, India
Funding
King Saud University
References (43)
Show source-provided references
1. A new AC/DC converter topology with high power factor10.1080/00207210210122550a ↗
2. Third-harmonic supply current minimization in single-phase AC/DC converters10.1080/00207210050192515 ↗
3. A review of active filters for power quality improvement10.1109/41.793345 ↗
4. Design of PI sliding mode control for Zeta DC–DC converter in PV system10.24425/bpasts.2022.140952 ↗
5. Efficient power factor correction in single phase AC–DC boost converter for retrofitted electric bicycle battery charging: A finite element analysis approach10.1016/j.compeleceng.2024.109549 ↗
6. High power factor rectifier based on buck converter operating in discontinuous capacitor voltage mode10.1109/63.892839 ↗
7. Merits and limitations of full-bridge rectifier with LC filter in meeting IEC 1000-3-2 harmonic-limit specifications10.1109/28.568022 ↗
8. Solar PV based high gain converter for microgrid applications
9. Improved power quality switched-mode power supply using buck–boost converter10.1109/tia.2016.2600675 ↗
10. Power factor corrected zeta converter based improved power quality switched mode power supply10.1109/tie.2015.2415752 ↗
11. Voltage controlled PFC SEPIC converter fed PMBLDCM drive for an air-conditioner
12. Reduced sensor configuration of a power factor correction based single-ended primary inductance converter fed brushless DC motor drive10.1049/iet-pel.2014.0981 ↗
13. PFC Cuk converter-fed BLDC motor drive10.1109/tpel.2014.2309706 ↗
14. Design and implementation of PFC Cuk converter fed SRM drive10.1049/iet-pel.2016.1039 ↗
15. Power factor correction in Cuk–SEPIC-based dual-output-converter-fed SRM drive10.1109/tie.2017.2733482 ↗
16. Bridgeless high-power-factor buck converter10.1109/tpel.2010.2068060 ↗
17. Improved efficiency coupled inductor-buck AC–DC light emitting diode (LED) driver10.1587/elex.13.20160626 ↗
18. Single-stage electrolytic capacitor less non-inverting buck-boost PFC based AC–DC ripple free LED driver10.1049/iet-pel.2015.0945 ↗
19. An adjustable-speed PFC bridgeless buck–boost converter-fed BLDC motor drive10.1109/TIE.2013.2274424 ↗
20. Power factor correction with single stage AC–DC non-isolated zeta converter fed SRM drive
21. A power quality improved bridgeless converter-based computer power supply10.1109/tia.2016.2575365 ↗
22. Improved power quality bridgeless Cuk converter fed brushless DC motor drive for air conditioning system10.1049/iet-pel.2013.0050 ↗
23. Analysis and design of single stage bridgeless Cuk converter for current harmonics suppression using particle swarm optimization technique10.1080/15325008.2019.1630692 ↗
24. Design and development of single phase AC–DC discontinuous conduction mode modified bridgeless positive output Luo converter for power quality improvement10.1049/iet-pel.2018.6059 ↗
25. Single-phase front-end bridgeless modified Landsman–Canonical switching cell PFC converter for arc welding applications10.1080/00051144.2022.2109743 ↗
26. Adaptive disturbance observer-based improved super-twisting sliding mode control for electromagnetic direct-drive pump10.1088/1361-665X/aca84e ↗
27. Centralized active power decoupling method for the CHB converter with reduced components and simplified control10.1109/TPEL.2023.3321671 ↗
28. Sideband harmonic suppression analysis based on vector diagrams for CHB inverters under unbalanced operation10.1109/TIE.2023.3247797 ↗
29. Prediction of magnetic field for PM machines with irregular rotor cores based on an enhanced conformal mapping model considering magnetic-saturation effect10.1109/TTE.2024.3423788 ↗
30. A MTPA and flux-weakening curve identification method based on physics-informed network without calibration10.1109/TPEL.2023.3295913 ↗
31. Design and optimization of a novel double-layer Helmholtz coil for wirelessly powering a capsule robot10.1109/TPEL.2023.3321845 ↗
32. Revolutionizing photovoltaic consumption and electric vehicle charging: A novel approach for residential distribution systems10.1049/gtd2.13232 ↗
33. An online reinforcement learning-based energy management strategy for microgrids with centralized control10.1109/TIA.2024.3430264 ↗
34. Broadband electrical impedance matching of sandwiched piezoelectric ultrasonic transducers for structural health monitoring of the rail in-service10.1016/j.sna.2023.114819 ↗
35. A direct yaw moment control framework through robust T-S fuzzy approach considering vehicle stability margin10.1109/TMECH.2023.3274689 ↗
36. An embedded DC power flow controller based on full-bridge modular multilevel converter10.1109/TIE.2023.3265041 ↗
37. Series-shunt multiport soft normally open points10.1109/TIE.2022.3229375 ↗
38. A review of common-mode voltage suppression methods in wind power generation10.1016/j.rser.2024.114773 ↗
39. Distributed three-phase power flow for AC/DC Hybrid networked microgrids considering converter limiting constraints10.1109/TSG.2022.3140212 ↗
40. Magnitude-phase characteristics analysis of inertia for DFIG-based wind turbines10.1109/TPEL.2024.3410294 ↗
41. Transient stability analysis and damping enhanced control of grid-forming wind turbines considering current saturation procedure10.1109/TEC.2024.3442925 ↗
42. Hybrid LVRT control of doubly-fed variable speed pumped storage to shorten crowbar operational duration10.1109/TPEL.2024.3435063 ↗
43. Cuk-SEPIC based bridgeless PFC dual output converter fed SRM drive