Strain analysis of acrylic pipe under liquid storage pressure

Pipeline transportation is an important engineering component, which is widely used in transporting gas and liquid resources. The safety of the pipeline became the central point of this study. Pipeline deformation caused by liquid storage pressure is of great significance to the safety of pipeline engineering. Previous studies mainly focused on pipe deformation under ring force and less on deformation caused by internal liquid. In this paper, the theoretical results of strain distribution are derived based on elastic mechanics, and the strain distribution equation is established. The effects of the liquid storage pressure, pipe diameter, and pipe length on pipe strain are investigated experimentally. The experimental results are in agreement with the equation. It is found that the strain increases linearly with the increase in reservoir pressure. Under the same length, the larger the pipe diameter is, the larger the pipe strain is when the pipe diameter is 5–10 mm. In the range of 10–15 mm, the average strain is basically unchanged. Under the same pipe diameter, the pipe length has little effect on the average strain. The strain is greatest in the middle of the pipeline and decreases gradually to both sides. The results have important guiding significance for pipeline protection and stress corrosion prevention.