journal article·2023-06-01Open access

Comparison of nano-silver solder joints and SAC305 based on ANSYS simulation and life prediction

Hui Yang, Zhengyu Xu

AIP Advances· Volume 13· Issue 6

Abstract

With the rapid development of microelectronic interconnection technology, the reliability requirements of electronic products are becoming higher and higher. Among them, temperature has the greatest impact on electronic devices. Due to the different coefficients of thermal expansion (CTE) between the many materials of a chip, the inside of a solder joint is subjected to cyclic temperature action. Under the effect of cyclic temperature, the solder joints are subject to internal fracture resulting in the failure of the solder joint. Therefore, it is necessary to find a more reliable material for the solder joint. In this paper, the advantages and disadvantages of pure silver material and low silver material are compared by finite element simulation analysis of nano-silver pure silver material and SAC305 low silver material, and the fatigue life prediction of nano-silveris predicted by a life prediction model. Then, using the Electric Power Research Institute estimation method to estimate the fatigue life of solder joints, the results are compared with those calculated by the finite element method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Study on the interconnection behavior and reliability of low temperature sintered nano-silver solder joints
2. Thermal effect simulation and reliability analysis of lead-free micro solder joints10.14106/j.cnki.1001-2028.2016.03.020 ↗
3. ANSYS-based multi-layer stacked module welding residual stress analysis and material selection superiority10.19659/j.issn.1008-5300.2020.02.009 ↗
4. Reliability analysis of BGA solder joints based on finite element simulation
5. Optimal design of CSP device structure based on Taguchi method
6. Thermal cycling induced plastic deformation in solder joints: Accumulated deformation in SMT solder joints
7. J. Z. Zhu , “Study of crystal orientation and microstructure evolution of solder joints under thermal cycling and aging conditions,” in M.S. thesis (Harbin Institute of Technology, 2013).
8. A thermomechanical constitutive model for investigating the fatigue behavior10.1111/ffe.13713 ↗
9. Investigation of recrystallization in BGA package to evaluate the low Ag solder with different dopants after board level test
10. Reliability and fatigue life prediction method for electronic packaging solder joints10.16579/j.issn.1001.9669.2005.04.013 ↗
11. Thermo-fatigue life evaluation of SnAgCu solder joints in flip chip assemblies10.1016/j.jmatprotec.2006.09.010 ↗
12. Strain based approach for predicting the solder joint fatigue life with the addition of intermetallic compound using finite element modeling
13. 1984 · 48
15. Equivalent remote stress method of J-integral evaluation for any stress-strain relationship materials10.16579/j.issn.1001.9669.2003.04.021 ↗
16. The determining of Ramberg-Osgood-shaped power hardening material’s hardening factor and hardening exponent
17. Coffin-Manson constant determination for a Sn-8Zn-3Bi lead-free solder joint10.1108/09540910610665071 ↗