journal article·2023-02-01Open access

Iron loss evaluation method for SiFe sheet material under PWM inverter excitation

Hiroaki Matsumori, Taisei Yamaguchi, Toshihisa Shimizu, Takashi Kosaka, Nobuyuki Matsui

AIP Advances· Volume 13· Issue 2

Abstract

This study proposed an iron loss evaluation method for SiFe sheet material under high-frequency current ripple caused by pulse width modulation (PWM) inverter switching. The PWM inverter switching results in dynamic minor loops on the BH plane, leading to iron loss. Furthermore, in magnetic material with wide major loops, such as SiFe sheet material, the iron loss caused by one dynamic minor loop differs based on the flux density bias difference even for the same magnetic field bias. A previous study reported an iron loss calculation error because the conventional iron loss calculation method neglected the iron loss of the flux density bias characteristic in the same magnetic field bias. Therefore, we modified the previously developed iron loss measurement system to collect the iron loss of the flux density bias characteristic and proposed an iron loss calculation method for SiFe sheet material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Applications · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nagoya Institute of Technology/Electrical and Mechanical Eng. 1 , Aichi 466-8555, Japan

Tokyo Metropolitan University/System Design Eng., Ltd. 2 , Tokyo 192-0397, Japan

Funding

Nagamori Foundation · JSPS KAKENHI · MEXT Program for Creation of Innovative Core Technology for Power Electronics

References (13)

Show source-provided references
1. Characterization and modeling of soft magnetic materials for improved estimation of PWM-induced iron loss10.1109/ecce.2018.8557438 ↗
2. Behavior of minor loop and iron loss under constant voltage type PWM inverter excitation10.1109/tmag.2012.2198199 ↗
3. Iron loss calculation under PWM inverter switching for SiFe steel materials10.1109/ecce.2019.8912818 ↗
4. A practical core loss model for filter inductors of power electronic converters10.1109/jestpe.2017.2761127 ↗
5. Iron loss prediction with PWM supply using low- and high-frequency measurements: Analysis and results comparison10.1109/tie.2008.917067 ↗
6. Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
7. Core losses under the DC bias condition based on Steinmetz parameters10.1109/tpel.2011.2160971 ↗
8. Calculating the iron losses in gapped inductors using the loss-map method10.1541/ieejjia.8.57 ↗
9. Evaluation of iron loss of AC filter inductor used in three-phase PWM inverters based on an iron loss analyzer10.1109/tpel.2015.2453055 ↗
10. On the law of hysteresis10.1109/proc.1984.12842 ↗
11. Core loss predictions for general PWM waveforms from a simplified set of measured data10.1109/apec.2010.5433375 ↗
12. Core loss calculation for power electronics converter excitation from a sinusoidal excited core loss data10.1063/1.5129419 ↗
13. High-speed core loss base data collection for core loss calculation under power electronics converter excitation10.1541/ieejjia.20006557 ↗