DataVXAIP AdvancesPaper
journal article·2022-04-01Open access

Simulation of large deformation process in forging based on Abaqus software

Bing Zheng, Dong Xu, Xuexi Wang, Longxin Guo, Hongyang Zhao, Dongying Ju

AIP Advances· Volume 12· Issue 4
Publisher pageOpen full text
Source abstract

Abstract

Thermodynamic coupling simulation of forging process is the basic work for the formulation of deformation parameters, subsequent recrystallization process, and phase transformation process. Whether the selection of simulation algorithms, elements, and grids can accurately reflect the engineering process has become a work with certain skills. In this paper, the forging upsetting process was simulated by Abaqus software, and the influence of different simulation parameters on the results was discussed. The different simulation results were verified by surface temperature measurement and shape measurement, which provided some simulation technical guidance for the actual forging process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and Metallurgy, University of Science and Technology Liaoning 1 , Anshan 114051, China

Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province, Hebei University of Engineering 2 , Handan 056038, China

Technology Center, Zhongyuan Special Steel Equipment Manufacturing Corp., Ltd. 3 , Jiyuan 459008, China

Technology Innovation Center for Wear Resistant Steel Plate of High Plasticity and High Toughness of Hebei Province, Hebei Puyang Iron and Steel Corp., Ltd. 4 , Handan 056305, China

Engineering Research Center for High Toughness Wind Tower Steel of Hebei Province, Hebei Puyang Iron and Steel Co., Ltd. 5 , Handan 056305, China

Funding

National Natural Science Foundation of China

References (15)

Show source-provided references
1. Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test10.1016/j.matdes.2012.01.048 ↗
2. Prediction of the fracture of metal in the process of screw rolling in a two-roll mill10.1007/s11015-018-0588-z ↗
3. Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling10.1007/s40430-013-0084-0 ↗
4. Design and analysis of roll-forming machine based on Abaqus equivalent simplified model10.13330/j.issn.1000-3940.2014.07.017 ↗
5. Analytical modeling and numerical simulation for three-roll bending forming of sheet metal10.1007/s00170-013-5135-2 ↗
6. Stability research on spinning of ultra-thin-wall aluminum alloy tube10.1007/s42452-020-2752-x ↗
7. Reduction of friction of steel covered with oxide scale in hot forging10.1016/j.jmatprotec.2013.10.011 ↗
8. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
9. Determination of residual ductility in the forging of bars on a lever-type radial forging machine10.1007/s11015-016-0225-7 ↗
10. Method of calculating the preforming parameters of wires in cable-winding with the use of the deform-3D software10.1007/s11015-014-9846-x ↗
11. Parameter identification of 42CrMo4 steel hot forging plastic flow behaviour using industrial upsetting presses and finite element simulations10.1007/s12289-020-01609-1 ↗
12. Integrated simulation of the forging process for GH4738 alloy turbine disk and its application10.3724/SP.J.1037.2013.00675 ↗
13. Study of transients in metal-shaping10.1007/s11015-010-9223-3 ↗
14. Simulation of dynamic and meta-dynamic recrystallization behavior of forged alloy 718 parts using a multi-class grain size model10.3390/ma14010111 ↗
15. Study on the microstructure and texture evolution of hot forged 20CrMnTiH steel spur bevel gear by simulation and experiment10.1007/s11665-020-04839-1 ↗