A method for LFM signal parameter estimation based on MWC system and STFT-DPT
Source abstract
Abstract
A method of estimating linear frequency modulation (LFM) signal parameters using compressed sampling (CS) data of a Modulated Wideband Converter (MWC) system is proposed. The short-time Fourier transform algorithm is used to analyze the CS signal of the MWC system, and the obtained CS signal frequency will present a form of multi-segment distribution. By intercepting the CS signal corresponding to the first segment frequency and analyzing the intercepted segment signal with discrete polynomial transform and Rife algorithm, the chirp rate and initial frequency estimation of the segment CS signal can be preliminarily estimated. According to the random sequence with cyclic displacement, the spectrum shift relationship between the input signal and the output signal can be calculated. Therefore, the parameter of the original signal can be estimated by using single channel CS data. Then, all channels are analyzed with the same method, and a more stable parameter estimation result can be obtained than the single channel output. Finally, combined with the simulation experiment, the proposed method can be used to estimate the initial frequency and chirp rate of the LFM signal using CS data effectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Blind Source Separation Techniques · Sparse and Compressive Sensing Techniques · Image and Signal Denoising Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Missile Engineering, Army Engineering University (Shijiazhuang Campus) , Shijiazhuang 050003, China
References (33)
Show source-provided references
1. Compressive sampling and reconstruction in shift-invariant spaces associated with the fractional Gabor transform10.1016/j.dt.2021.04.003 ↗
2. Accurate and robust CW-LFM radar sensor: Transceiver front-end design and implementation10.1109/JSEN.2018.2885048 ↗
3. Influence of atmosphere attenuation on quantum interferometric radar10.7498/aps.66.150301 ↗
4. Information elasticity in radar systems10.1049/el.2018.0295 ↗
5. A 14-bit 4-MS/s VCO-based SAR ADC with deep metastability facilitated mismatch calibration10.1109/JSSC.2019.2950188 ↗
6. A 25 GS/s 6b TI two-stage multi-bit search ADC with soft-decision selection algorithm in 65 nm CMOS10.1109/jssc.2017.2689033 ↗
7. GF-3 data real-time processing method based on multi-satellite distributed data processing system10.1007/s11771-020-4335-9 ↗
8. Segmented compressed sampling for analog-to-information conversion: Method and performance analysis10.1109/tsp.2010.2091411 ↗
9. A nonuniform sampler for wideband spectrally-sparse environments10.1109/jetcas.2012.2214635 ↗
10. Non-uniform sampling: Post-Fourier era of NMR data collection and processing10.1002/mrc.4284 ↗
11. A noise-shaped VCO-based nonuniform sampling ADC with phase-domain level crossing10.1109/jssc.2019.2892426 ↗
12. A constrained random demodulator for sub-Nyquist sampling10.1109/TSP.2012.2231077 ↗
13. Generalized analog-to-information converter with analysis sparse prior10.1109/tcsi.2021.3090441 ↗
14. Research on BER of BPSK signal based on stochastic resonance under Levy noise
15. From theory to practice: Sub-Nyquist sampling of sparse wideband analog signals10.1109/jstsp.2010.2042414 ↗
16. Parameter estimation of frequency hopping signal based on MWC–MSBL reconstruction10.1049/iet-com.2019.0987 ↗
17. Characterization of Analog-to-Information Converters [imsawards]10.1109/MIM.2022.9693447 ↗
18. Parameter estimation of multiple mono-pulse radar signals intercepted by Nyquist folding receiver using periodic chirp local oscillator based on periodic fractional autocorrelation10.1049/cje.2020.00.305 ↗
19. Parameter estimation of frequency shift keying radar signal intercepted by Nyquist folding receiver using periodic linear frequency modulation local oscillator10.1049/rsn2.12050 ↗
20. Multi-channels wideband digital reconnaissance receiver based on compressed sensing10.1049/iet-spr.2012.0086 ↗
21. Multi-channels wideband digital reconnaissance receiver based on compressed sensing10.1049/ietspr.2012.0086 ↗
22. Frequency estimation algorithm without reconstruction based on MWC CS structure10.1049/el.2018.5824 ↗
23. Two-stage hybrid precoding for minimizing residuals using convolutional neural network10.1109/lcomm.2021.3121475 ↗
24. Improved signal demodulation and detection algorithm for parallel receiver10.1109/ICPICS50287.2020.9202265 ↗
25. A low-complexity multistage polyphase filter bank for wireless microphone detection in CR10.1007/s00034-016-0358-8 ↗
26. A non-maximally decimated dynamic reconfigurable channelized structure based on modulated filter bank10.4236/ijcns.2017.108B010 ↗
27. Signal processing with compressive measurements10.1109/jstsp.2009.2039178 ↗
28. Joint carrier and 2D-DOA estimation for L-shaped array based on sub-nyquist sampling10.1109/I2MTC50364.2021.9460096 ↗
29. Joint carrier frequency and DOA estimation using a modified ULA based MWC discrete compressed sampling receiver10.1049/iet-rsn.2017.0436 ↗
30. Total least squares phased averaging and 3-D ESPRIT for joint azimuth-elevation-carrier estimation10.1109/78.890341 ↗
31. Real-time frequency and 2-D angle estimation with sub-Nyquist spatio-temporal sampling10.1109/78.324743 ↗
32. Low computational enhancement of STFT-based parameter estimation10.1109/jstsp.2015.2465310 ↗
33. Ground maneuvering target detection based on discrete polynomial-phase transform and Lv’s distribution10.1016/j.sigpro.2017.10.027 ↗