Research on the sharpness of combustion noise of three-cylinder GDI engine based on adaptive cyclic Wiener filter method
Source abstract
Abstract
In order to analyze the sharpness of combustion noise of the gasoline direct injection (GDI) engine, the in-cylinder pressure and noise of different loads and speeds of a three-cylinder GDI engine are measured. An adaptive cycle Wiener filter method is proposed to separate the combustion noise. The result indicated that the proposed method can overcome the drawbacks of the original Wiener filter method and is able to separate high-frequency combustion noise components more accurately and effectively. The sharpness of the combustion noise is calculated by the Zwicker method and Aures method, and the comparison results show that the Aures method is more suitable for evaluating combustion noise. The influence of different loads and speeds on the sharpness of combustion noise is investigated by the proposed method systematically. The results indicated that at low speed (1500 r/min), the combustion noise and sharpness will increase with the load while at medium (3000 r/min) and high (5500 r/min) speeds, the combustion noise under half load (50%) has the highest sharpness. Excessive high load (100%) and too low load (0%) both suppress the generation of combustion noise. As for the same engine load, a higher engine speed will lead to higher combustion noise and sharpness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Combustion Engine Technologies · Vehicle Noise and Vibration Control · Vehicle emissions and performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical Engineering, Ningbo University of Technology 1 , Ningbo 315016, China
College of Energy Engineering, Zhejiang University 2 , Hangzhou 310000, China
Funding
National Natural Science Foundation of China
References (28)
Show source-provided references
1. Three-cylinder engine solutions offering low noise vibration and harshness for range extender and hybrid electric vehicles
2. Comparison of different downsizing strategies for 2- and 3-cylinder engines by the use of 1D-CFD simulation
3. The effects of cylinder deactivation on the thermal behaviour and performance of a three cylinder spark ignition engine
4. Separation of combustion and mechanical noise using Wiener filter
5. Diesel engine combustion and mechanical noise separation using an improved spectrofilter10.1016/j.ymssp.2009.04.001 ↗
6. Numerical approach for assessing combustion noise in compression-ignited Diesel engines10.1016/j.apacoust.2018.02.006 ↗
7. Experimental analysis of cyclical dispersion in compression-ignited versus spark-ignited engines and its significance for combustion noise numerical modeling10.1115/1.4040287 ↗
8. Combustion noise level assessment in direct injection diesel engines by means of in-cylinder pressure components10.1088/0957-0233/18/7/045 ↗
9. Characteristics and effect factors of pressure oscillation in multi-injection DI diesel engine at high-load conditions10.1016/j.apenergy.2017.03.048 ↗
10. Apparent effects of in-cylinder pressure oscillations and cycle-to-cycle variability on heat release rate and soot concentration under long ignition delay conditions in diesel engines10.1177/1468087413483288 ↗
11. Experimental investigations of noise and vibration characteristics of gasoline-methanol blend fuelled gasoline direct injection engine and their relationship with combustion characteristics10.1016/j.applthermaleng.2019.113754 ↗
12. Combustion, performance and particulate matter emissions analysis of operating parameters on a GDI engine by traditional experimental investigation and Taguchi method10.1016/j.enconman.2018.03.017 ↗
13. Knocking combustion in spark-ignition engines10.1016/j.pecs.2017.03.004 ↗
14. The competing chemical and physical effects of transient fuel enrichment on heavy knock in an optical spark ignition engine10.1016/j.apenergy.2016.07.038 ↗
15. Investigation of lubricant induced pre-ignition and knocking combustion in an optical spark ignition engine10.1016/j.proci.2018.07.061 ↗
16. Engine noise separation through Gibbs sampling in a hierarchical Bayesian model10.1016/j.ymssp.2019.03.040 ↗
17. Noise source separation of diesel engine by combining binaural sound localization method and blind source separation method10.1016/j.ymssp.2017.04.027 ↗
18. Separation of combustion noise in IC engines under cyclo-non-stationary regime10.1016/j.ymssp.2013.02.015 ↗
19. Cycle-to-cycle variation analysis of two-colour PLIF temperature measurements calibrated with laser induced grating spectroscopy in a firing GDI engine
20. The impact of methanol injecting position on cylinder-to-cylinder variation in a diesel methanol dual fuel engine10.1016/j.fuel.2016.11.072 ↗
21. The effect of engine speed and cylinder-to-cylinder variations on backfire in a hydrogen-fueled internal combustion engine10.1016/j.ijhydene.2019.06.058 ↗
22. Experimental investigation on the sharpness reduction of an axial piston pump with reinforced shell10.1016/j.apacoust.2018.08.005 ↗
23. Sound quality evaluation and prediction for the emitted noise of axial piston pumps10.1016/j.apacoust.2018.09.015 ↗
24. Sound quality prediction for engine-radiated noise10.1016/j.ymssp.2014.10.005 ↗
25. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms
26. 1980
27. 2007
28. Knock-induced cavity resonances in open chamber Diesel engines10.1121/1.382910 ↗