Influence of loading rate on the infrared radiation of PMMA
Source abstract
Abstract
Infrared thermography has widely been used in observing and recording failure processes. The loading rate is a critical parameter that influences the infrared radiation (IR) in the mechanical experiment. However, little work has been done regarding its influence on infrared radiation. In order to conduct an in-depth study on the influence of loading rates on IR, a series of three-point bending experiments were conducted on PMMA samples for the IR test. Then, the influence was explained through a physical model derived from the first law of thermodynamics. The experimental results showed that under a fixed loading rate, the change rate of the IR emission was constant, and the relationship between the IR emission and loading time exhibited a linear trend. The variation between the change rate of IR emission and the loading rate can be expressed by the exponential function. The insights gained from this study will be of assistance to obverse the loading processes by infrared thermography.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Calibration and Measurement Techniques · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory for GeoMechanics and Deep Underground Engineering, China University of Mining and Technology 1 , Beijing 100083, China
Institute for Deep Underground Science and Engineering 2 , Beijing 100083, China
School of Mechanics and Civil Engineering, China University of Mining and Technology 3 , Beijing 100083, China
Institute of Physics Chinese Academy of Sciences 4 , Beijing 100190, China
Funding
Foundation of Institute for Deep Underground Science and Engineering · National Natural Science Foundation of China
References (31)
Show source-provided references
1. Improving the detection of thermal bridges in buildings via on-site infrared thermography: The potentialities of innovative mathematical tools10.1016/j.enbuild.2018.10.017 ↗
2. Electric currents streaming out of stressed igneous rocks—A step towards understanding pre-earthquake low frequency EM emissions10.1016/j.pce.2006.02.027 ↗
3. Geology, tectonics and topography underlined by L’Aquila earthquake TIR precursors10.1093/gji/ggu123 ↗
4. Non-destructive thermal-wave-radar imaging of manufactured green powder metallurgy compact flaws (cracks)10.1016/j.ndteint.2016.12.004 ↗
5. Evaluation of the characteristics of the reflection plate to measure defects in the invisible area using infrared thermography10.1016/j.net.2019.09.005 ↗
6. Changes in infrared radiation with rock deformation10.1016/s1365-1609(02)00049-7 ↗
7. IR in building physics10.1016/0020-0891(85)90127-7 ↗
8. Terrestrial outgoing infrared radiation as an indicator of seismic activity
9. Infrared thermovision of damage processes in concrete and rock10.1016/0013-7944(90)90207-W ↗
10. Characteristics of infrared radiation of coal specimens under uniaxial loading10.1007/s00603-015-0780-4 ↗
11. Spatial-temporal infrared radiation precursors of coal failure under uniaxial compressive loading10.1016/j.infrared.2018.07.034 ↗
12. Physical modeling of deep ground excavation in geologically horizontal strata based on infrared thermography10.1016/j.tust.2010.01.012 ↗
13. Physical modeling of an underground roadway excavation in geologically 45° inclined rock using infrared thermography10.1016/j.enggeo.2010.12.001 ↗
14. Physical modeling of an underground roadway excavation in vertically stratified rock using infrared thermography10.1016/j.ijrmms.2010.06.020 ↗
15. Thermal radiation characteristics of stress evolution of a circular tunnel excavation under different confining pressures10.1016/j.tust.2018.04.021 ↗
16. Experimental study on infrared radiation temperature field of concrete under uniaxial compression10.1016/j.infrared.2018.01.033 ↗
17. An experimental study on infrared radiation characteristics of sandstone samples under uniaxial loading10.1007/s00603-018-1688-6 ↗
18. Infrared radiation characteristics and fracture precursor information extraction of loaded sandstone samples with varying moisture contents10.1016/j.ijrmms.2020.104344 ↗
19. Using the characteristics of infrared radiation during the process of strain energy evolution in saturated rock as a precursor for violent failure10.1016/j.infrared.2020.103406 ↗
20. Strain rate effect on deformation kinetics: Infrared radiation thermography application10.1179/174328409x425272 ↗
21. Experimental study of infrared radiation effects of rock with different loading rates
22. Precursors for rock fracturing and failure—Part I: IRR image abnormalities10.1016/j.ijrmms.2005.09.002 ↗
23. Precursors for rock fracturing and failure—Part II: IRR T-curve abnormalities10.1016/j.ijrmms.2005.09.001 ↗
24. IR thermograph characteristics of photoelastical material in loading
25. Stress distribution and variation on infrared thermograph and photoelastic technique
26. Experimental study on infrared radiation with the deformation of photoelastical material
27. Numerical study on infrared radiation of photo-elastic material subjected to external loading
28. Microscopic mechanism of infrared radiation characteristics of elastic-solid materials
29. Experimental verification of the relationship between stresses and infrared radiation of photoelastic materials
30. Infrared thermography for temperature measurement and non-destructive testing10.3390/s140712305 ↗
31. Quantitative description of infrared radiation characteristics for solid materials subjected to external loading10.1007/s11771-009-0169-1 ↗