Simulation of three-dimensional eutectic growth multi-phase field based on OpenCL parallel

Based on the muti-component eutectic multi-phase field model of S. G. Kim, W. T. Kim, T. Suzuki et al. [J. Cryst. Growth 261, 135–158 (2004)], the high-performance computing method of hardware and software architecture of OpenCL + graphics processing unit (GPU) was studied. Taking CBr4–C2Cl6 as an example, the evolution process of large-scale three-dimensional eutectic structure growth is realized by concurrent execution of multiple processes and multiple threads on two heterogeneous platforms of AMD and NVIDIA, respectively. The effects of different initial lamellar spacing and flow on eutectic lamellar morphology were also studied. The results show that, with the increasing of eutectic lamellar spacing, the morphology of eutectic lamellar changes are as follows: the symmetrically steady-state perpendicular to the interface is based on growth, the slightly oscillating state is unstable, and the large oscillating state is unstable; Under the condition of forced convection, the symmetrically alternating growth pattern of the original eutectic lamellar was broken, the melt flow led to the change of eutectic growth morphology, and the eutectic lamellar grew in the opposite direction of the flow. At the same computing scale, compared with the serial algorithm on the central processing unit platform, the acceleration ratio on the single GPU on the heterogeneous platform reaches 24.3 times and 21.6 times respectively, which improves the computing efficiency. At the same time, with its strong floating-point computing power to obtain more accurate simulation results and achieve the dual needs of computational efficiency and portability, it has also proven to solve the problems of a large amount of calculation, low efficiency and limited to qualitative research existing in the traditional phase-field models.