Thermal design and simulation of the collector for 140GHz megawatt-class gyrotron on ITER
Source abstract
Abstract
Thermal co-simulation for the collector of a 140GHz, 1MW gyrotron is achieved in this paper. Thermal losses due to the particle collision in collector from the CST Particle Studio are directly applied to the thermal analysis by the CST Multi-Physics Studio. The convective heat transfer coefficient of copper with different water flow rate has been discussed. In the simulation, the maximum temperature in the collector changes from 419°C to 245°C, which is achieved respectively at the water flow rates from 5m/s to 15m/s. The thermal deformation caused by different temperature distribution in the collector changes from 0.551mm to 0.253mm, which provides physical analysis for the collector.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gyrotron and Vacuum Electronics Research · Microwave Engineering and Waveguides · Particle accelerators and beam dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electronic Science and Engineering, University of Electronic Science and Technology of China 1 , Chengdu 610054, China
Institute of Modern Physics, Chinese Academy of Sciences 2 , Lanzhou 730000, China
Funding
Fundamental Reasearch Funds for the Central Universities of China · National Key R&D Program of China · National Natural Science Foundation of China
References (13)
Show source-provided references
1. Novel applications of millimetre and submillimetre wave gyrodevices10.1023/a:1010799620273 ↗
2. Gyro-devices and their applications
3. 2005 · 180
4. Collector design studies for a 1 MW cylindrical-cavity and a 4 MW coaxial-cavity gyrotron
5. A comparative study of three single-stage depressed collector designs for a 1-MW CW gyrotron10.1109/27.887735 ↗
6. 2004
7. CST Studio Suite documentation, Computer Simulation Technology (CST) GmbH.: http://www.cst.de.
8. Improved collectors for high power gyrotrons
9. Simulating the effect of secondary emission in the collector of high power CW gyrotrons
10. Design of a multistage depressed collector system for 1MW CW gyrotrons–Part II: System consideration10.1109/27.772279 ↗
11. The analysis of affect factors in correct coefficient of surface convective heat transfer coefficient during film drying process
12. Heat transfer measurements from a surface with uniform heat flux and an impinging jet10.1115/1.3250776 ↗
13. 1989