Effect of 3D submerged jet shape on maximum pressure of plunge pool bottom
Source abstract
Abstract
Maximum pressure is one of the key factors that affect jet scouring. Previous studies have focused on the attenuation characteristics of the submerged jet, but there are few studies on the influence of the nappe shape on the pressure of the plunge pool. In this paper, a combination of numerical simulation and physical experiments was used to determine the influence on the maximum pressure of the vertical rectangular submerged jet with different aspect ratios (1, 3, 5, 8, 11.25, 15, and 20), incident flow velocity, and water depth on the plunge pool bottom. The hydraulic diameter, D, of the entering interface was proposed to measure the degree of dispersion of the nappe, based on which an empirical formula for the maximum pressure on the plunge pool bottom was obtained. By applying the formula to other shapes of jets (rhombuses, triangles, circles, ellipses, etc.), higher precision calculation results were also obtained, and the formula calculation results were in good agreement with the test results of the existing literature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrology and Sediment Transport Processes · Hydraulic flow and structures · Aerodynamics and Acoustics in Jet Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Yangling Vocational and Technical College 1 , Yangling 712100, China
River and Reservoir Administration of Shaanxi Province 2 , Xi’an 710018, China
Changjiang Survey, Planning, Design and Research Co., Ltd. 3 , Wuhan 430010, China
Shaanxi Province Department of Water Resources 4 , Xi’an 710004, China
References (26)
Show source-provided references
1. Paper 32: Characteristics of a turbulent slot jet impinging on a plane surface10.1243/pime_conf_1967_182_242_02 ↗
2. Characterization of turbulent jets from high-aspect-ratio rectangular nozzles10.1063/1.1928667 ↗
3. Impinging jet studies for turbulence model assessment—II. An examination of the performance of four turbulence models10.1016/s0017-9310(05)80205-4 ↗
4. Investigation of three-dimensional turbulent rectangular jets10.2514/3.61277 ↗
5. Large-scale turbulence characteristics of a submerged water jet10.1002/aic.690090519 ↗
6. Impingement of axisymmetric developing jets10.1080/00221687709499637 ↗
7. Experimental investigation on impingement of a submerged circular water jet at varying impinging angles and Reynolds numbers10.1016/j.expthermflusci.2017.08.005 ↗
8. The calculation of three-dimensional turbulent free jets
9. A new k-ϵ eddy viscosity model for high Reynolds number turbulent flows: Model development and validation10.1016/0045-7930(94)00032-t ↗
10. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
11. The numerical computation of turbulent flows10.1016/0045-7825(74)90029-2 ↗
12. An experimental investigation of laminar axisymmetric submerged jets10.1017/s0022112083001871 ↗
13. Influence of rectangular impinge jet’s aspect ratio on impact pressure
14. Effects of aeration on properties of frequency spectrum of pressure fluctuation on the bottom of the receiving pool plunged by jets
15. Numerical simulation of submerged jet within a water cushion pool
16. Experimental and numerical study on the characteristics of plunging pressure caused by submerged plunging jet with high velocity
17. Pressure distribution of vertical jets in bottom and sidewalls of plunge pools due to pool dimensions
18. Impact pressures of turbulent high-velocity jets plunging in pools with flat bottom10.1007/s00348-006-0219-5 ↗
19. Plunge pool pressures: A temporal analysis in the nappe flow case10.1080/00221686.2014.968226 ↗
20. Experimental study on controlling parameters of flow in plunge pools and corresponding impact pressure characteristics
21. 2000 · 390
22. 1980
23. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications10.1115/1.2960953 ↗
24. Experimental study on optimizing asymmetric hydraulic structure of flood discharge energy dissipation for high arch dam
25. Study on energy dissipation of two-jet with varying discharge ratio on a plunge pool based on computational fluid dynamics
26. Submerged impingement jet experiment in plunge pool downstream of high dam