Analysis and experimental study of patch tube mechanical properties based on screen pipe hydroforming patch technology
Source abstract
Abstract
Hydroforming patch technology for damaged screen pipes is designed based on tube hydroforming technology, and the methods for determining the forming pressure range and forming defects are selected according to the forming process. The hydroforming patch model for screen pipes is established according to the technical demand parameters for screen pipe repair. From the mechanical properties of the material and digital–analog comparison analysis of the material formability, it is found that the determiners for formability (such as forming pressure, thinning rate, and springback) of 321 stainless steel (SS321) are better than those of 304L stainless steel (SS304L), and the patch tube materials meeting the technical requirements were selected. A test bench for the formability of patch tubes was built to verify the forming pressure of patch tubes with different thicknesses and the distribution of wall thickness after forming. The results show that the hydroforming patch technology is feasible and can realize the firm and close fit between the patch tube and screen pipe; moreover, SS321 can meet the material requirements of the patch tube.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electronic Engineering, China University of Petroleum (East China) 1 , Qingdao, Shandong 266580, China
College of Mechanical and Electronic Engineering, Shandong Agricultural University 2 , Taian, Shandong 271018, China
Funding
Major Scientific and Tecjnological Project of CNPC under Grant
References (38)
Show source-provided references
1. Comprehensive review of water shutoff methods for horizontal wells10.1016/S1876-3804(17)30115-5 ↗
2. Optimization of perforated liner parameters in horizontal oil wells10.1007/s13202-020-00951-z ↗
3. Comprehensive experimental study on the sand retention media of pre-filled sand control screens10.1080/02726351.2019.1687628 ↗
4. Study on the erosion of screen pipe caused by sand-laden slurry10.36909/jer.v8i4.9069 ↗
5. Design for reliability: Experimental and numerical simulation of cased and perforated completions with standalone screen10.2118/201315-PA ↗
6. Subsection optimization method research of slotted screen liner parameters for horizontal wells10.1088/1755-1315/189/2/022075 ↗
7. Casing-and screen-failure analysis in highly compacting sandstone fields10.2118/146231-PA ↗
8. Experimental study of sand control in a natural gas hydrate reservoir in the South China sea10.1016/j.ijhydene.2019.07.090 ↗
9. Collapse and bending analysis of slotted liners with laboratory tests and 3D FEM10.2118/191441-PA ↗
10. An integrated workflow to design screen/slotted liners in geothermal wells10.1016/j.geothermics.2017.12.003 ↗
11. Effect of slot width and density on slotted liner performance in SAGD operations10.3390/en13010268 ↗
12. A new laboratory protocol to study the plugging and sand control performance of sand control screens10.1016/j.petrol.2019.106548 ↗
13. Structural behavior of solid expandable tubular undergoes radial expansion process-analytical, numerical, and experimental approaches10.1016/j.ijsolstr.2013.05.013 ↗
14. Solid expandable tubular patching technique for high-temperature and high-pressure casing damaged wells10.1016/S1876-3804(15)30032-X ↗
15. Cold hydraulic expansion of oil well tubulars10.1016/j.ijpvp.2011.08.003 ↗
16. Analysis of forming limit in tube hydroforming10.1007/s12206-013-0925-x ↗
17. Global sensitivity analysis and multi-objective optimisation of loading path in tube hydroforming process based on metamodelling techniques10.1007/s00170-013-5518-4 ↗
18. Analysis on critical conditions of sidewall wrinkling for hydroforming of thin-walled Tee-joint10.1016/j.ijmachtools.2015.06.004 ↗
19. Hydroforming simulation and experiment of clad T-shapes10.1007/s00170-015-7558-4 ↗
20. Silicon electro-optic micro-modulator fabricated in standard CMOS technology as components for all silicon monolithic integrated optoelectronic systems10.1088/1361-6439/abf333 ↗
21. Analysis of contact pressure of mechanically lined corrosion resistant alloy pipe by hydraulic expansion process10.1115/1.4035314 ↗
22. Process parameter correlation in low pressure hydro forming of 6063-O aluminium tubes10.5755/j01.mech.25.1.20326 ↗
23. Process analysis of biconvex tube hydroforming based on loading path optimization by response surface method10.1007/s00170-020-06411-6 ↗
24. Hydraulic expansion of lined pipe for offshore pipeline applications10.1016/j.apor.2020.102523 ↗
25. Corrosion resistance of stainless steel pipes in soil10.1002/maco.200905552 ↗
26. Cold atmospheric plasma for the ablative treatment of neuroblastoma10.1016/j.jpedsurg.2012.10.020 ↗
27. Experimental verification of the influence of normal stress on the formability of thin-walled 5A02 aluminum alloy tubes10.1016/j.ijmecsci.2014.07.011 ↗
28. Design and analysis of sealed suspension module based on solid expandable tubular repair technology10.1007/s12206-019-1215-z ↗
29. Liner wrinkling and collapse of girth-welded bi-material pipe under bending10.1016/j.apor.2015.01.018 ↗
30. Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep10.1299/jamdsm.2016jamdsm0055 ↗
31. Solid expandable tubular forming behavior based on twin shear stress yield criterion: Analytical, numerical simulation and experiment10.1016/j.tws.2020.106922 ↗
32. Prevention study on defective solid expandable tubular fracture10.1016/j.engfailanal.2020.105121 ↗
33. The effect of extrusion conditions on the properties and textures of AZ31B alloy10.1016/j.jma.2017.03.002 ↗
34. Theoretical analysis of pressure-bearing performance on compression packer in low permeability reservoirs10.1016/j.ijpvp.2021.104325 ↗
35. Experimental study of mechanical properties and residual stresses of expandable tubulars with a thread joint10.1016/j.tws.2017.02.031 ↗
36. Loading path optimization of T tube in hydroforming process using response surface method10.1007/s00170-018-3087-2 ↗
37. Deformation behaviours of SS304 tubes in pulsating hydroforming processes10.12989/sem.2016.60.1.091 ↗
38. Analysis of thickness variation and stress state in hydroforming of complex T-shaped tubular part of nickel-based superalloy10.1007/s43452-021-00263-x ↗