Demonstration of bright x-ray sources from solid and foam TiO2 targets at the Shenguang-III prototype laser facility
Source abstract
Abstract
Enhancement of x-ray sources from laser-produced plasmas is significant in wide-ranging applications. Solid and foam TiO2 targets were both used to generate bright x-ray sources at the Shenguang-III prototype laser facility, with a total laser power of 3.2 TW. The new foam targets were with an ultra-low initial density of 8.1 mg/cm3 and a high Ti fraction of 33 sat. %. By absolute measurements, the multi-keV x rays of the 4 keV–7 keV band and 1.6 keV–4.4 keV band and the total x rays above 0.1 keV of the foam target have simultaneously shown conversion enhancements of 1.4, 3.1, and 2.3 times, respectively, compared with the solid target. A much larger emission volume and an average electron temperature of 3.2 keV by moving the foci of laser beams inner were obtained for the foam target, providing a good condition for multi-keV x-ray production.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser-Plasma Interactions and Diagnostics · Laser-induced spectroscopy and plasma · Laser Design and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Center of Laser Fusion, China Academy of Engineering Physics , Mianyang 621900, China
Funding
National Key Research and Development Program of China · Laser Fusion Research Center Funds for Young Talents
References (37)
Show source-provided references
1. The physics basis for ignition using indirect drive targets on the National Ignition Facility10.1063/1.1578638 ↗
2. Efficient soft x-ray sources from laser-irradiated gold foam targets with well-controlled impurities10.1088/1741-4326/aa9453 ↗
3. Laser-plasma interactions at 0.53 m for disk targets of varying Z10.1103/physrevlett.47.1289 ↗
4. Characterization of a multi-keV x-ray source produced by nanosecond laser irradiation of a solid target: The influence of laser focus spot and target thickness10.1063/1.2831034 ↗
5. Multi-keV x-ray area source intensity at SGII laser facility10.1063/1.5025255 ↗
6. Multi-keV x-ray conversion efficiencies of laser-preexploded titanium foils10.1063/1.2032167 ↗
7. Review of laser produced multi-keV x-ray sources from metallic foils, cylinders with liner, and low density aerogels10.1063/1.4947306 ↗
8. Development of high intensity x-ray sources at the National Ignition Facility10.1063/1.5015927 ↗
9. How high energy fluxes may affect Rayleigh-Taylor instability growth in young supernova remnants10.1038/s41467-018-03548-7 ↗
10. Efficient multi-keV underdense laser-produced plasma radiators10.1103/physrevlett.87.275003 ↗
11. The crystal backligher imager: A spherically bent crystal imager for radiography on the National Ignition Facility10.1063/1.5058700 ↗
12. Implosion dynamics measurements by monochromatic x-ray radiography in inertial confinement fusion10.1063/1.4903336 ↗
13. Research of shaped pulse driven hohlraum asymmetry by 2D x-ray radiography10.1063/1.5065369 ↗
14. Capsule implosion optimization during the indirect-driven National Ignition Campaign10.1063/1.3592170 ↗
15. X-ray shadow imprint of hydrodynamic instabilities on the surface of inertial confinement fusion capsules by the fuel fill tube10.1103/PhysRevE.95.031204 ↗
16. A higher-than-predicted measurement of iron opacity at solar interior temperatures10.1038/nature14048 ↗
17. A test cassette for x-ray-exposure experiments at the National Ignition Facility10.1063/1.3470684 ↗
18. Titanium and germanium lined hohlraums and halfraums as multi-keV x-ray radiators10.1063/1.3130263 ↗
19. Bright x-ray stainless steel k-shell source development at the National Ignition Facility10.1063/1.4922751 ↗
20. Multi-keV x-ray sources from metal-lined cylindrical hohlraums10.1063/1.4746031 ↗
21. Efficient laser-induced 6-8 keV x-ray production from iron oxide aerogel and foil-lined cavity targets10.1063/1.4740076 ↗
22. Multi-keV x-ray conversion efficiency in laser-produced plasmas10.1063/1.1566750 ↗
23. Multi-keV x-ray source development experiments on the National Ignition Facility10.1063/1.3458904 ↗
24. Demonstration of a 13-keV Kr K-shell x-ray source at the National Ignition Facility10.1103/physreve.88.033104 ↗
25. Demonstration of a long pulse x-ray source at the National Ignition Facility10.1063/1.4979172 ↗
26. Efficient multi-keV x-ray sources from Ti-doped aerogel targets10.1103/physrevlett.92.165005 ↗
27. Absolute x-ray yields from laser-irradiated germanium-doped low-density aerogels10.1063/1.3140041 ↗
28. Titanium dioxide nanofiber-cotton targets for efficient multi-keV x-ray generation10.1063/1.2969300 ↗
29. High-power laser interaction with low-density C-Cu foams10.1063/1.4935911 ↗
30. Bright x-ray sources from laser irradiation of foams with high concentration of Ti10.1063/1.4864330 ↗
31. Dependence of optimal initial density on laser parameters for multi-keV x-ray radiators generated by nanosecond laser-produced underdense plasma10.1063/1.4939536 ↗
32. Efficient multi-keV x-ray source generated by nanosecond laser pulse irradiated multi-layer thin foils target10.1063/1.4871730 ↗
33. Fabrication of titania nanofibers by electrospinning10.1021/nl034039o ↗
34. A novel flat-response x-ray detector in the photon energy range of 0.1-4 keV10.1063/1.3460269 ↗
35. A compact flat-response x-ray detector for the radiation flux in the range from 1.6 keV to 4.4 keV10.1088/0957-0233/23/6/065902 ↗
36. FLYCHK: Generalized population kinetics and spectral model for rapid spectroscopic analysis for all elements10.1016/j.hedp.2005.07.001 ↗
37. Laser performance upgrade for precise ICF experiment in SG-III Laser Facility10.1016/j.mre.2017.07.004 ↗