DataVXAIP AdvancesPaper
journal article·2017-05-01Open access

Transient line starting analysis of the ultra-high speed PMSM

Wenjie Cheng, Wei Li, ling Xiao, Ming Li, Yongsheng Tian, Yanhua Sun, Lie Yu

AIP Advances· Volume 7· Issue 5
Publisher pageOpen full text
Source abstract

Abstract

Aiming at the ultra high speed permanent magnet synchronous motor (PMSM) supported by gas foil bearings (GFBs), this paper calculates the transient line starting of the motor. Firstly, the start effect of the rotor composed of cylindrical PM and stainless steel sleeve is studied. Then, in order to enhance the start torque, copper ring, nickel ring and copper squirrel-cage are introduced in the rotor and their start effect are analysed, respectively. It can be found that the rotor including nickel ring can be accelerated to set speed, but all the other rotors are failed due to the higher PM and braking torques. It can be concluded that some material owning slight large relative permeability can be applied in the rotor to reduce the PM field and contribute to start by using the line-start method.
Source: crossref · Quality: baseline

Research context

Metals & alloys

OpenAlex topics: Electric Motor Design and Analysis · Magnetic Bearings and Levitation Dynamics · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Xi’an University of Science and Technology 1 Department of Basic Courses, Mechanics Research Center, , Xi’an, Shaanxi 710054, China

Chinese Academy of Science Corporation or Laboratory 2 Institute of Engineering Thermophysics, , No. 11, Beisihuanxi Road, 100190, Beijing, China

Xi’an Jiaotong University 3 Institute of Mechatronics and Information Systems, State Key Laboratory for Strength and Vibration of Mechanical Structures, , Xi’an, 710049, China

Funding

China Postdoctoral Science Foundation · National Natural Science Foundation of China · Natural Science Foundation of Shaanxi Province

References (11)

Show source-provided references
1. Line-Start Permanent-Magnet Machines Using a Canned Rotor10.1109/tia.2009.2018981 ↗
2. 1980 · 12
3. 1991 · 12
4. Improved analytical modelling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets10.1049/ip-epa:20040546 ↗
5. An analytical determination of eddy-current losses in a configuration with a rotating permanent magnet10.1109/TMAG.2007.900570 ↗
6. Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance10.1109/TMAG.2006.874594 ↗
7. Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping10.1109/TMAG.2007.908652 ↗
8. An improved analytical solution for predicting magnetic forces in permanent magnet motors10.1063/1.2859486 ↗
9. Analytical model for predicting magnet loss of surface-mounted permanent magnet machines accounting for slotting effect and load10.1109/TMAG.2011.2165321 ↗
10. Hysteresis modeling in transient analysis of electric motors with AlNiCo magnets10.1109/tmag.2014.2362615 ↗
11. 2011 · 167