Prediction of mechanical properties and fatigue life of nanosilver slurry in chip interconnection

This article investigates the failure mode and mechanism of copper pillar solder joints in temperature cycling experiments, focusing on a Cu/nano Ag/Cu solder joint structure. The hot pressing bonding condition at 300 °C with insulation for 10 s is chosen for the experiments. Based on the life test results, the thermal cycling fatigue life of the nanosilver solder joint is determined to be 2050 cycles. To gain further insights, finite element software ANSYS is employed to simulate nanosilver solder joints in flip chips, revealing the stress–strain distribution within the solder joints. The simulation utilizes the Anand viscoplastic constitutive model for the solder joint, providing a reasonable representation of the stress–strain behavior under thermal cycling load. Notably, the simulation highlights that the maximum stress and strain occur in the contact area between the solder joint and the copper column. To enhance accuracy, the calculation equation is refined using relevant experience, resulting in a prediction of the thermal fatigue life of nanosilver solder joints. This prediction aligns closely with the experimental results. The research outcomes not only contribute valuable insights into the behavior of nanosilver solder but also serve as a reference for its application in electronic packaging.