RETRACTED: Culturally-informed for designing motorcycle fire rescue: Empirical study in developing country
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
Fire must be responded to quickly and effectively. Difficulties in reaching the fire location may arise due to high traffic. Motorcycle fire rescue can be an alternative to first aid in challenging areas. However, these areas, characterized by diverse cultural backgrounds, require careful consideration. Culture significantly impacts how such rescue systems are perceived, accepted, and utilized. This study delves into the efficiency and implementation of motorcycle fire rescue systems across different contexts, focusing on their alignment with regional cultural norms. Objectives include assessing operational challenges, identifying cultural implications, proposing culturally sensitive design recommendations, evaluating acceptance and effectiveness, and suggesting strategies and policy enhancements to strengthen emergency response capabilities. A preliminary trial was conducted to validate the survey instrument, followed by statistical analysis such as structural equation modeling, confirmatory factor analysis, and satisfaction level assessments. Findings highlight how cultural attitudes shape design preferences, the need for adaptable approaches to overcome operational hurdles, and the importance of adhering to culturally relevant design principles for system efficacy. Field tests also suggest potential improvements in emergency response effectiveness. Recognizing cultural considerations is essential in designing motorcycle fire rescue systems to enhance emergency response in developing nations. Furthermore, aligned with sustainable urban development goals, this research provides policymakers with valuable insights and practical approaches for engaging stakeholders. Equipping designers with information to address motorcycle fire incidents using environmentally friendly solutions underscores the importance of crafting emergency response plans sensitive to cultural differences across diverse landscapes. This article is being retracted effective 20 September 2024.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Injury Epidemiology and Prevention · Agriculture and Farm Safety · Urban Transport and Accessibility
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Industrial and Manufacturing Technology and Engineering, Universiti Teknikal Malaysia Melaka 1 , Durian Tunggal,
Faculty of Computer Science, Universitas Bandar Lampung 2 , Bandar Lampung,
References (64)
Show source-provided references
1. Artificial intelligence based modelling and hybrid optimization of linseed oil biodiesel with graphene nanoparticles to stringent biomedical safety and environmental standards10.1016/j.csite.2023.103554 ↗
2. Gravimetric approach of fuel consumption in 30% biodiesel blends fuel: Cost-effective solution of real-world fuel consumption measurement10.1080/23311916.2024.2345512 ↗
3. Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks
4. Preventing environmental and health problems due to LPG transport tank leaks: Fatigue and crack behavior of heat-treated steel investigation10.1080/23311916.2024.2304491 ↗
5. Synergistic advances in natural fibre composites: a comprehensive review of the eco-friendly bio-composite development, its characterization and diverse applications10.1039/D4RA00149D ↗
6. Modified hemp fiber combined with melamine cyanurate for enhancing fire safety and mechanical properties of unsaturated polyester resins for automobile parts10.1063/5.0076024 ↗
7. Characteristics of pulsating heat pipe with variation of tube diameter, filling ratio, and SiO2 nanoparticles: Biomedical and engineering implications10.1016/j.csite.2024.104065 ↗
8. Twisted helical Tape’s impact on heat transfer and friction in zinc oxide (ZnO) nanofluids for solar water heaters: Biomedical insight10.1016/j.csite.2024.104204 ↗
9. Using nano-fluids minimum quantity lubrication (NF-MQL) to improve tool wear characteristics for efficient machining of CFRP/Ti6Al4V Aeronautical structural composite10.3390/pr11051540 ↗
10. Three-dimensional aperture principle for end-fire radiation antenna array10.1063/5.0040136 ↗
11. Physiological effect of deep pressure in reducing anxiety of children with ASD during traveling: A public transportation setting10.3390/bioengineering9040157 ↗
12. Control design of vibrotactile stimulation on weighted vest for deep pressure therapy10.15562/bmj.v13i1.4952 ↗
13. Effect of short-term deep-pressure portable seat on behavioral and biological stress in children with autism spectrum disorders: A pilot study10.3390/bioengineering9020048 ↗
14. Thermal performance evaluation of solar collector with rice husk graphene-PCM: Bioengineering approach10.1016/j.csite.2023.103773 ↗
15. Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM
16. Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods10.1007/s00419-022-02332-w ↗
17. Analyzing of continuous and discontinuous contact problems of a functionally graded layer: Theory of elasticity and finite element method10.1080/15397734.2023.2262562 ↗
18. Research of the impact of material and flow properties on fluid-structure interaction in cage systems10.12989/was.2023.36.1.031 ↗
19. Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods10.12989/scs.2023.46.4.565 ↗
20. Power and energy optimization of carbon based lithium-ion battery from water spinach (Ipomoea aquatica)10.12911/22998993/158564 ↗
21. Constructing an elderly health monitoring system using fuzzy rules and internet of things10.1063/5.0195107 ↗
22. Assessing the calming effects of a self-regulated inflatable vest: An evaluation based on visual analogue scale and electroencephalogram10.1080/23311916.2024.2313891 ↗
23. Electric discharge machining of Ti6Al4V ELI in biomedical industry: Parametric analysis of surface functionalization and tribological characterization10.3390/ma16124458 ↗
24. Study of contact mechanics between two brass solids in various diameter ratios and friction coefficient10.1177/14657503221144810 ↗
25. Performance comparison of Newtonian and non-Newtonian fluid on a heterogeneous slip/No-slip journal bearing system based on CFD-FSI method10.3390/fluids7070225 ↗
26. Relationship between deformation and running-in wear on hard-on-hard bearings from metal, ceramic, and diamond materials for total hip prosthesis
27. Computational contact pressure prediction of CoCrMo, SS 316L and Ti6Al4V femoral head against UHMWPE acetabular cup under gait cycle10.3390/jfb13020064 ↗
28. Optimization of the cutting process on machining time of ankle foot as transtibial prosthesis components using response surface methodology10.1016/j.rineng.2023.101736 ↗
29. Optimization of 3D printed parameters for socket prosthetic manufacturing using the Taguchi method and response surface methodology10.1016/j.rineng.2024.101847 ↗
30. The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty10.3390/jfb12020038 ↗
31. Investigation of melt flow index and tensile properties of dual metal reinforced polymer composites for 3D printing using machine learning approach: Biomedical and engineering applications10.1063/5.0207551 ↗
32. TRIZ-based method for developing a conceptual laparoscopic surgeon’s chair10.1080/23311916.2023.2298786 ↗
33. Von Mises stress analysis of surgery chair designed for laparoscopic surgeon with lifting mechanism10.1063/5.0188663 ↗
34. Tresca stress evaluation of metal-on-UHMWPE total hip arthroplasty during peak loading from normal walking activity10.1016/j.matpr.2022.02.055 ↗
35. Wireless-based portable device heart rate measurement as biomedical devices for stress detection10.1063/5.0200619 ↗
36. Minimizing risk of failure from ceramic-on-ceramic total hip prosthesis by selecting ceramic materials based on Tresca stress10.3390/su142013413 ↗
37. Analysis of contact pressure in a 3D model of dual-mobility hip joint prosthesis under a gait cycle10.1038/s41598-023-30725-6 ↗
38. Biomechanical effects of the porous structure of gyroid and voronoi hip implants: A finite element analysis using an experimentally validated model10.3390/ma16093298 ↗
39. The effect of load, diameter ratio, and friction coefficient on residual stress in a hemispherical contact for application in biomedical industry10.1007/s11665-024-09330-9 ↗
40. Assessment of polyethylene wear in dual mobility implant for Asians on various head-to-liner ratios: A finite-element analysis10.1177/13506501241240021 ↗
41. Diameter ratio and friction coefficient effect on equivalent plastic strain (PEEQ) during contact between two brass solids10.1080/23311916.2023.2218691 ↗
42. Performance of textured dual mobility total hip prosthesis with a concave dimple during Muslim prayer movements10.1038/s41598-023-50887-7 ↗
43. Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses10.5312/wjo.v15.i4.321 ↗
44. Influence of fly ash filler on the mechanical properties and water absorption behaviour of epoxy polymer composites reinforced with pineapple leaf fibre for biomedical applications10.1039/d4ra00529e ↗
45. Investigation of mesh model for a finite element simulation of the dual-mobility prosthetic hip joint
46. Investigation on three-dimensional printed prosthetics leg sockets coated with different reinforcement materials: Analysis on mechanical strength and microstructural10.1038/s41598-024-57454-8 ↗
47. Identifying biomarkers and therapeutic targets by multiomic analysis for HNSCC: Precision medicine and healthcare management10.1021/acsomega.3c07206 ↗
48. The effects of carbon fiber surface treatment by oxidation process for enhanced mechanical properties of carbon fiber/epoxy composites for biomedical application10.1063/5.0183153 ↗
49. Bioengineering solutions for expansive soil stabilization using waste materials: An experimental evaluation10.1063/5.0210939 ↗
50. Kenaf fiber and hemp fiber multi-walled carbon nanotube filler-reinforced epoxy-based hybrid composites for biomedical applications: Morphological and mechanical characterization10.3390/jcs7080324 ↗
51. In Silico contact pressure of metal-on-metal total hip implant with different materials subjected to gait loading10.3390/met12081241 ↗
52. Tresca stress simulation of metal-on-metal total hip arthroplasty during normal walking activity10.3390/ma14247554 ↗
53. Tresca stress study of CoCrMo-on-CoCrMo bearings based on body mass index using 2D computational model
54. Global patterns of phosphatase activity in natural soils10.1038/s41598-017-01418-8 ↗
55. Excessive application of chemical fertilizer and organophosphorus pesticides induced total phosphorus loss from planting causing surface water eutrophication10.1038/s41598-021-02521-7 ↗
56. Construction safety influencing factor analysis of bridge-erecting machines based on structural equation modeling10.1016/j.heliyon.2024.e24957 ↗
57. Unilateral external fixator and its biomechanical effects in treating different types of femoral fracture: A finite element study with experimental validated model10.1016/j.heliyon.2024.e26660 ↗
58. Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications10.1063/5.0200625 ↗
59. A method for estimating the contact area of a dual-mobility total hip prosthesis10.1063/5.0188638 ↗
60. Running-in behavior of dual-mobility cup during the gait cycle: A finite element analysis10.1177/09544119231216023 ↗
61. The effect of tortuosity on permeability of porous scaffold10.3390/biomedicines11020427 ↗
62. Level of activity changes increases the fatigue life of the porous magnesium scaffold, as observed in dynamic immersion tests, over time10.3390/su15010823 ↗
63. Polycrystalline diamond as a potential material for the hard-on-hard bearing of total hip prosthesis: Von Mises stress analysis10.3390/biomedicines11030951 ↗
64. Adopted walking condition for computational simulation approach on bearing of hip joint prosthesis: Review over the past 30 years10.1016/j.heliyon.2022.e12050 ↗