An improved proportional topology optimization method combining a polarized material interpolation scheme and Heaviside threshold function

An improved proportional topology optimization (IPTO) method is proposed in this work. The main improvement of this method is that the conventional solid isotropic material with penalization (SIMP)-based material interpolation scheme is replaced by a polarized material interpolation scheme, and the Heaviside threshold function is adopted based on the original proportional topology optimization (PTO) method. By using this approach, the minimum compliance problem can be solved without requiring the numerical derivation of the sensitivity function. To verify the feasibility and effectiveness of the proposed method, two-dimensional (2D) and three-dimensional (3D) cantilevers and L-bracket beams are used as examples. The 2D results obtained by the IPTO method are compared with those obtained by the PTO and SIMP methods. Numerical examples demonstrate that IPTO can acquire better objective function values and more ideal topology structures compared to PTO and SIMP. Furthermore, IPTO offers significant advantages over PTO and SIMP in terms of convergence speed and the ability to suppress intermediate density elements. Additionally, this method enables topology optimization design under multiple working conditions. Therefore, it provides an effective approach for structural topology optimization in research and engineering applications. With appropriate adjustment, this method can also be applied to composite material design and heat conduction design.