Low temperature synthesis of Sm-Fe alloy powder by reduction-diffusion process using new reductant of Li-Ca eutectic melt
Source abstract
Abstract
In this study, the low-temperature reduction-diffusion (LTRD) process using a Li-Ca reductant, which has a low eutectic point of about 230 °C, was demonstrated. The RD reaction was possible at a very low temperature of 400 °C significantly less than 850 °C, which is the lowest practicable temperature of the conventional RD process, by identifying the production of the SmFe2 phase. The LTRD process in this study also made it possible to investigate the Sm-Fe binary phases synthesized at the low temperature and the Sm-Fe phase transitions depending on the temperatures with the compositions of Sm and Fe.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Magnetic Powder Metallurgy Research Center, National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98 Anagahora, Shimoshidami, Moriyama-ku, Nagoya 463-8560, Aichi, Japan
Funding
Adaptable and Seamless Technology Transfer Program through Target-Driven R and D
References (22)
Show source-provided references
1. Intrinsic hard magnetic properties of Sm (Fe1−xCox)12 compound with the ThMn12 structure10.1016/j.scriptamat.2017.05.029 ↗
2. Structural and magnetic properties of rapidly quenched (R,Zr)(Fe,Co)10Nx(R = Nd, Sm)10.1063/1.361679 ↗
3. New material for permanent magnets on a base of Nd and Fe10.1063/1.333572 ↗
4. New nanocrystalline high-remanence Nd-Fe-B alloys by rapid solidification10.1016/0304-8853(93)90475-h ↗
5. Recent development of Nd–Fe–B sintered magnets and their applications10.1016/j.jmmm.2006.01.171 ↗
6. Structural and hard magnetic properties of rapidly solidified Sm–Fe–N10.1063/1.349302 ↗
7. Sm2Fe17-nitride-based permanent magnets produced by the hydrogenation-decomposition-desorption-recombination (HDDR) process10.1016/0925-8388(93)90587-d ↗
8. Structural and magnetic properties of Sm-Fe-N magnets prepared by hydrogenation and nitrogenation processes10.1016/0304-8853(95)00021-6 ↗
9. Preparation of TbCu7-type Sm-Fe powders by low-temperature HDDR treatment10.1016/j.jmmm.2018.01.092 ↗
10. Metastable RFe7 compounds (R = rare earths) and their nitrides with TbCu7 structure10.1063/1.361739 ↗
11. Formation of modified TbCu7 and Th2Zn17 type structures during annealing of mechanical-alloyed Sm–Fe powders10.1016/s0925-8388(98)00571-4 ↗
12. Reaction mechanism for the formation of intermetallic compounds from layered Sm/Fe powder obtained by mechanical milling10.1007/bf00975080 ↗
13. Novel synthesis of single-crystalline TbCu7 type Sm-Fe powder by low-temperature reduction-diffusion process using molten salt10.1016/j.jre.2021.05.017 ↗
14. Experimental study on the reduction-diffusion process to produce Fe–Nd, Fe–Sm, Co–Nd and Co–Sm alloys10.2320/matertrans1989.31.463 ↗
15. Formation of Sm–Fe intermetallic compounds by the reduction-diffusion process with CaH210.2320/matertrans1989.33.1163 ↗
16. Synthesis mechanism of Sm2Fe17 alloy produced in reduction-diffusion process10.1016/s1002-0721(10)60357-2 ↗
17. Direct preparation of submicron-sized Sm2Fe17 ultra-fine powders by reduction-diffusion technique10.1016/j.jallcom.2015.12.124 ↗
18. TbCu7-type Sm-X-Fe compounds (X = Zr, Hf, Y, Dy, La, Ce and Nd) synthesized by low-temperature reduction-diffusion (LTRD) process using molten salt10.1063/9.0000283 ↗
19. 2006
20. Improvement of magnetization of submicron-sized high coercivity Sm2Fe17N3 powder by using hydrothermally synthesized sintering-tolerant cubic hematite10.1063/1.4975052 ↗
21. Preparation of submicron-sized Sm2Fe17N3 fine powder with high coercivity by reduction-diffusion process10.1016/j.jallcom.2016.10.306 ↗
22. 1990 · 12