Application of aerating techniques for noise suppression in capillary tubes

A method for suppressing noise in capillary tubes was developed with aerating techniques. The refrigerant R600a was added to the outlet of a throttling capillary from the end of a transition tube between the capillary and evaporator. To investigate the flow characteristic of R600a in the transition tube, a two-phase flow quasi-steady simulation was performed using the mixture model. The Schnerr–Sauer cavitation model was used, and the turbulence model was realizable k − ɛ. Numerical results show that the local pressure and negative mass transfer rate can both be reduced at the downstream of the capillary where bubbles collapse, when bypass capillaries are used in the aerating model. An experimental system was built to measure the noise in a transition tube with/without a bypass capillary. Results show that the noise sound pressure level decreased by 2 dB on average when aerating techniques were used. This research describes the complex mechanism of the throttling flashing process and provides an effective method to suppress the noise in capillary tubes, which will be beneficial to improve occasional sharp noise in a household refrigerator.