journal article·2021-01-01Open access

Effect of wall boundary conditions on the nonlinear response of turbulent premixed flames

Yuzhou Cheng, Kun Luo, Tai Jin, Zongyan Li, Haiou Wang, Jianren Fan

AIP Advances· Volume 11· Issue 1

Abstract

Fully compressible Large Eddy Simulations (LES) are performed to investigate the effect of wall boundary conditions on the nonlinear response of turbulent premixed flames. For the unforced flames, the flame length and flame angle from the present LES results in the isothermal case are in better agreement with experimental results than those in the adiabatic case. For the forced flames, both amplitudes and phases of nonlinear flame response at moderate frequency are well reproduced in the isothermal case. While in the adiabatic case, the amplitudes are well reproduced, the prediction of phases is slightly underestimated. At high frequency, LES results from the isothermal case provide reasonable agreement with the experimental results in general, while the adiabatic case gives unreasonable prediction of nonlinear flame response. Results show that wall boundary conditions affect the spatial distributions of heat release fluctuations by changing the temperature field, which is affected by the evolutions of the flame structure and flow field in the nonlinear oscillation cycle. At moderate frequency, heat release fluctuations in different parts of the combustor are in phase, and wall boundary conditions have limited influence on the global flame response, while at high frequency, wall boundary conditions have significant influence on the global flame response since the heat release fluctuations in different parts of combustor are out of phase. Accurate prediction of flame response at high frequency needs accurate calculation of the wall temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Combustion and flame dynamics · Fire dynamics and safety research · Advanced Combustion Engine Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Clean Energy Utilization, Zhejiang University 1 , Hangzhou 310027, China

School of Aeronautics and Astronautics, Zhejiang University 2 , Hangzhou 310027, China

Funding

National Natural Science Foundation of China

References (39)

Show source-provided references
1. Dynamics and stability of lean-premixed swirl-stabilized combustion10.1016/j.pecs.2009.01.002 ↗
2. Combustion dynamics and control: Progress and challenges10.1016/s1540-7489(02)80007-4 ↗
3. Prediction and control of combustion instabilities in real engines10.1016/j.proci.2016.05.007 ↗
4. The thermoacoustic instability in a stratified swirl burner and its passive control by using a slope confinement10.1016/j.energy.2020.116956 ↗
5. Flame quenching at walls: A source of sound generation10.1007/s10494-017-9810-5 ↗
6. Impact of the flame-holder heat-transfer characteristics on the onset of combustion instability10.1080/00102202.2013.816575 ↗
7. Joint experimental and numerical study of the influence of flame holder temperature on the stabilization of a laminar methane flame on a cylinder10.1016/j.combustflame.2016.06.025 ↗
8. Wall-temperature effects on flame response to acoustic oscillations10.1016/j.proci.2014.07.015 ↗
9. Influence of flame-holder temperature on the acoustic flame transfer functions of a laminar flame10.1016/j.combustflame.2017.09.016 ↗
10. Large eddy simulation of combustion instabilities in a lean partially premixed swirled flame10.1016/j.combustflame.2011.08.004 ↗
11. Acoustic and large eddy simulation studies of azimuthal modes in annular combustion chambers10.1016/j.combustflame.2012.06.016 ↗
12. Simulation of the flame describing function of a turbulent premixed flame using an open-source LES solver10.1016/j.combustflame.2014.11.039 ↗
13. Influence of heat transfer and material temperature on combustion instabilities in a swirl burner10.1115/1.4035143 ↗
14. Acoustically perturbed turbulent premixed swirling flames10.1063/1.3553276 ↗
15. Identification of the flame describing function of a premixed swirl flame from LES10.1080/00102202.2012.663981 ↗
16. Coupling heat transfer and large eddy simulation for combustion instability prediction in a swirl burner10.1016/j.combustflame.2018.01.007 ↗
17. Impact of flame-wall interaction on premixed flame dynamics and transfer function characteristics10.1016/j.proci.2010.06.132 ↗
18. Large eddy simulation-based study of the influence of thermal boundary condition and combustor confinement on premix flame transfer functions10.1115/1.4007734 ↗
19. The response of a harmonically forced premixed flame stabilized on a heat-conducting bluff-body10.1016/j.proci.2014.06.007 ↗
20. R. Balachandran, “Experimental investigation of the response of turbulent premixed flames to acoustic oscillations,” University of Cambridge, Ph.D. thesis, 2005.
21. Experimental investigation of the nonlinear response of turbulent premixed flames to imposed inlet velocity oscillations10.1016/j.combustflame.2005.04.009 ↗
22. Investigation of the nonlinear response of turbulent premixed flames to imposed inlet velocity oscillations10.1016/j.combustflame.2006.06.002 ↗
23. Thermal response of a turbulent premixed flame to the imposed inlet oscillating velocity10.1016/j.energy.2016.12.028 ↗
24. Computation of forced premixed flames dynamics10.1080/00102202.2016.1174117 ↗
25. H. Wang and A. Laskin, A comprehensive reaction model of ethylene and acetylene combustion, http://ignis.usc.edu/Mechanisms/C2-C4/c2.html, 1998.
26. Chemical-kinetic mechanisms for combustion applications, UCSD, http://web.eng.ucsd.edu/mae/groups/combustion/mechanism.html, 2011.
27. See https://www.cerfacs.fr/avbp7x/ for AVBP solver.
28. Compressible large eddy simulation of turbulent combustion in complex geometry on unstructured meshes10.1016/j.combustflame.2004.03.008 ↗
29. A thickened flame model for large eddy simulations of turbulent premixed combustion10.1063/1.870436 ↗
30. Dynamically thickened flame LES model for premixed and non-premixed turbulent combustion
31. 2005
32. Subgrid-scale stress modelling based on the square of the velocity gradient tensor10.1023/a:1009995426001 ↗
33. Numerical modeling of soot production in aero-engine combustors using large eddy simulations
34. Boundary conditions for direct simulations of compressible viscous flows10.1016/0021-9991(92)90046-2 ↗
35. Flow forcing techniques for numerical simulation of combustion instabilities10.1016/s0010-2180(02)00419-4 ↗
36. Flame macrostructures and thermoacoustic instabilities in stratified swirling flames10.1016/j.proci.2018.06.147 ↗
37. Development of high-order Taylor–Galerkin schemes for LES10.1006/jcph.2000.6538 ↗
38. Spark ignition of turbulent nonpremixed bluff-body flames10.1016/j.combustflame.2007.06.012 ↗
39. Eddies, streams, and convergence zones in turbulent flows