Fabrication of the laser textured nickel surface and its tribological property under the water lubrication
Source abstract
Abstract
Friction is one of the main causes of mechanical component failure and material waste. It is known from the friction theory that changing the roughness of the surface of the material can change the friction property of the material. Laser surface texturing is a good method for constructing a rough surface. In the experiment, the texture of the circular pits with different areal densities was constructed on the nickel surface. The coefficient of friction of the circular pit under the water-lubricated friction condition was kept at about 0.17, while the untreated metal nickel under the same conditions exceeds 0.65. The circular pit texture improves the frictional properties of the nickel surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Beijing Institute of Aerospace Control Devices 1 , Beijing 100094, China
PetroChina Research Institute of Petroleum Exploration & Development, Department of Petroleum Equipment 2 , Beijing 100083, China
Chinese Academy of Sciences, Institute of Semiconductors 3 , Beijing 100083, China
Institute for Advanced Interdisciplinary Research, Nanjing University of Aeronautics and Astronautics 4 , Nanjing 210016, China
College of Astronautics, Nanjing University of Aeronautics and Astronautics 5 , Nanjing 210016, China
Funding
China Petroleum International Cooperation Development Project Foundation · China Railway Corporation Science and Technology Research and Development Program · National Natural Science Foundation of China
References (24)
Show source-provided references
1. Friction and wear behavior of laser textured surface under lubricated initial point contact10.1016/j.wear.2010.12.049 ↗
2. The effect of multi-scale laser textured surface on lubrication regime10.1016/j.apsusc.2012.12.068 ↗
3. Efficiency of laser surface texturing in the reduction of friction under mixed lubrication10.1016/j.triboint.2014.04.012 ↗
4. Friction properties of lubricated laser-microtextured-surfaces: An experimental study from boundary-to hydrodynamic-lubrication10.1007/s11249-012-0045-2 ↗
5. Effects of surface texturing on the frictional behavior of cast iron surfaces10.1016/j.triboint.2013.10.006 ↗
6. Minimize friction of lubricated laser-microtextured-surfaces by tuning microholes depth10.1016/j.triboint.2014.03.014 ↗
7. Lubricant film thickness and friction force measurements in a laser surface textured reciprocating line contact simulating the piston ring–liner pairing10.1016/j.triboint.2016.02.026 ↗
8. Study on wear resistance of bionic non-smooth shape on hot work die steel surface
9. 2005
10. Study on wear resistance of laser engraved bionic non-smooth form on roll surface
11. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact10.1016/j.apsusc.2013.02.013 ↗
12. Femtosecond laser-induced periodic surface structures on steel and titanium alloy for tribological applications10.1007/s00339-014-8229-2 ↗
13. Fabricating the superhydrophobic nickel and improving its antifriction performance by the laser surface texturing10.3390/ma12071155 ↗
14. Laser surface texturing of gray cast iron for improving tribological behavior10.1007/s00339-014-8281-y ↗
15. Femtosecond laser texturing of surfaces for tribological applications10.3390/ma11050801 ↗
16. Fabricating the superhydrophobic nickel and improving its antifriction performance by the laser surface texturing10.3390/ma12071155 ↗
17. The effect of multi-scale laser textured surface on lubrication regime10.1016/j.apsusc.2012.12.068 ↗
18. Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors10.1016/j.triboint.2011.08.005 ↗
19. Influence of texturing parameters and contact conditions on tribological behaviour of laser textured surfaces10.1007/s11012-010-9316-x ↗
20. Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film10.1016/j.triboint.2014.09.017 ↗
21. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact10.1016/j.apsusc.2013.02.013 ↗
22. Wear life and adhesion of solid lubricant films on laser-textured steel surfaces10.1016/j.wear.2009.01.053 ↗
23. The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact10.1016/j.triboint.2004.08.004 ↗
24. Increasing nanohardness and reducing friction of nitride steel by laser surface texturing10.1016/j.triboint.2008.09.008 ↗