Error modeling and calibration of a 4ṞRR redundant positioning system
Source abstract
Abstract
Using the macro-micro combination positioning system for nanomanipulating can fulfill the requirements of large workspace, high precision and multi-degrees of freedom. As a macro part of the macro-micro combination positioning system, a redundantly actuated three degrees-of-freedom (DOF) parallel kinematic mechanism (4ṞRR) with a directly driven system is studied in this paper. Firstly, the error sensitivity of the 4ṞRR planar parallel mechanism is analyzed with global errors sensitive index (GESI) based on the error model of the positioning system. Then, a novel and practical calibration method combined with an error compensation strategy is proposed for the 4ṞRR positioning system. Finally, in order to verify the proposed method, a series of experiments are conducted with the laser measurement system in creditable conditions, and the data are illustrated for comparisons. The experimental results show that the positioning accuracy of the 4ṞRR positioning system is improved, and the performances of the end-effector are enhanced based on the proposed method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Robotic Mechanisms and Dynamics · Advanced Measurement and Metrology Techniques · Piezoelectric Actuators and Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Guangdong Provincial Key Laboratory of Precision Equipment and Manufacturing Technology, School of Mechanical and Automotive Engineering, South China University of Technology , Guangzhou 510640, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Guangdong Province
References (28)
Show source-provided references
1. 1999
2. Jacobian, manipulability, condition number, and accuracy of parallel robots10.1115/1.2121740 ↗
3. Kinematic analysis and motion planning of a quadruped robot with partially faulty actuators10.1016/j.mechmachtheory.2015.05.010 ↗
4. Optimal design of a planar parallel 3-DOF nanopositioner with multi-objective10.1016/j.mechmachtheory.2017.02.005 ↗
5. Optimum design of a novel redundantly actuated parallel manipulator with multiple actuation modes for high kinematic and dynamic performance10.1007/s11071-015-2353-1 ↗
6. Redundant parallel manipulators10.1002/(sici)1098-2728(1996)8:1<17::aid-lra3>3.3.co;2-w ↗
7. Kinematic calibration of a 3-DOF planar parallel robot10.1108/01439911211227971 ↗
8. A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network10.1016/j.neucom.2014.03.085 ↗
9. Online robot calibration based on hybrid sensors using Kalman Filters10.1016/j.rcim.2014.08.002 ↗
10. A general and novel approach for parameter identification of 6-DOF parallel kinematic machines10.1016/j.mechmachtheory.2004.06.009 ↗
11. An improved kinematic model for calibration of serial robots having closed-chain mechanisms10.1017/s0263574711001184 ↗
12. Kinematic calibration of a six-axis serial robot using distance and sphere constraints10.1007/s00170-014-6448-5 ↗
13. A unified error model for tolerance design, assembly and error compensation of 3-DOF parallel kinematic machines with parallelogram struts10.1016/s0007-8506(07)61521-2 ↗
14. Kinematic calibration of a 2-DOF translational parallel manipulator10.1080/01691864.2014.888374 ↗
15. 2014
16. A simple yet effective approach for error compensation of a tripod-based parallel kinematic machine10.1016/s0007-8506(07)62947-3 ↗
17. Error compensation method of parallel robot based on ant colony algorithm
18. A global performance index for the kinematic optimization of robotic manipulators10.1115/1.2912772 ↗
19. Error modeling and sensitivity analysis of a parallel robot with SCARA (selective compliance assembly robot arm) motions10.3901/cjme.2014.0423.082 ↗
20. A new calibration method for a directly driven 3PRR positioning system10.1007/s10846-016-0403-7 ↗
21. Self-calibration of a class of parallel kinematic machines with redundant kinematic chain10.3901/jme.2012.01.001 ↗
22. Self-calibration method of planar flexible 3-RRR parallel manipulator10.3901/jme.2009.03.150 ↗
23. Positioning error compensation for a parallel robot based on BP neural networks
24. The structure parameter calibration of a planar 3RRR manipulator
25. Comparison between inverse distance weighting method and Kriging
26. Calibration of a hexapod machine tool using a redundant leg10.1016/s0890-6955(99)00081-4 ↗
27. The relationships between the shapes of the workspaces and the link lengths of 3-DOF symmetrical planar parallel manipulators10.1016/s0094-114x(00)00046-x ↗
28. A comparative study of planar 3-RRR and 4-RRR mechanisms with joint clearances10.1016/j.rcim.2015.09.005 ↗